journal article·2021-11

A novel hemp-fiber bio-composite material for strengthening of arched structures: Experimental investigation

M. Gioffré, A. Vincenzini, N. Cavalagli, V. Gusella, M.A. Caponero, A. Terenzi, C. Pepi

Publisher page

Abstract

Abstract Fiber reinforced composites represent an alternative to traditional techniques for strengthening and retrofitting masonry structures. Within the growing environmental awareness, the development of composite materials to replace conventional synthetic fibers and polymeric matrices has become a crucial issue. In this paper, a novel sustainable composite material consisting in hemp fibers and a natural matrix made of a mix of ground clay bricks and organic binder is proposed. Experimental tests are carried out in order to estimate the mechanical characteristics of the single composite components. The structural performance of polycentric masonry arches strengthened at the extrados first with only natural matrix and then with the bio-composite material (i.e. hemp fibers and biodegradable matrix) is investigated. Single point vertical load tests and tilt tests are carried out in order to assess the effectiveness of the strengthening by comparing the results with those obtained with unstrengthened masonry arches.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Masonry and Concrete Structural Analysis · Hygrothermal properties of building materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (72)

Show source-provided references
1. Computational applications in masonry structures: from the meso-scale to the super-large/super-complex10.1615/IntJMultCompEng.2020030889 ↗
2. Assessment of structural behaviour and seismic retrofitting for an Italian monumental masonry building
3. Expeditious damage index for arched structures based on dynamic identification testing10.1016/j.conbuildmat.2020.120236 ↗
4. An integrated approach for the numerical modeling of severely damaged historic structures: Application to a masonry bridge10.1016/j.advengsoft.2020.102935 ↗
5. Laser doppler and radar interferometer for contactless measurements on unaccessible tie-rods on monumental buildings: Santa Maria della Consolazione Temple in Todi
6. Masonry arches: Historical rules and modern mechanics10.1080/15583050701312926 ↗
7. Seismic vulnerability of sub-structures: Vantitelli’s modulus in Murena palace10.3390/buildings10090164 ↗
8. Limit equilibrium analysis of masonry arches10.1007/s00419-014-0963-6 ↗
9. Lateral loads carrying capacity and minimum thickness of circular and pointed masonry arches10.1016/j.ijmecsci.2016.07.015 ↗
10. Experimental and numerical investigation of the collapse of pointed masonry arches under quasi-static horizontal loading10.1016/j.engstruct.2018.06.009 ↗
11. Collapse displacements of masonry arch with geometrical uncertainties on spreading supports10.1016/j.compstruc.2018.07.001 ↗
12. Kinematic collapse load calculator: Circular arches10.1016/j.softx.2018.05.006 ↗
13. Thrust network analysis of masonry vaults
14. Collapse state of elliptical masonry arches after finite displacements of the supports
15. Thrust line analysis revisited and applied to optimization of masonry arches10.1016/j.ijmecsci.2020.105690 ↗
16. Automatic procedures for the safety assessment of stand-alone Masonry Arches
17. Experimental investigation on masonry arches strengthened with PBO-FRCM composite10.1016/j.compositesb.2016.05.063 ↗
18. Experimental modal analysis of brick masonry arches strengthened prepreg composites10.1016/j.culher.2014.06.003 ↗
19. Lightweight extrados restraining elements for the anti-seismic retrofit of single leaf vaults10.1016/j.engstruct.2017.03.038 ↗
20. Reduction of the lateral thrust of masonry arches and vaults with FRP composites10.1016/j.conbuildmat.2006.07.009 ↗
21. Intrados strengthening of brick masonry arches with composite materials10.1016/j.compositesb.2011.03.005 ↗
22. Experimental behavior of FRP strengthened masonry arches10.1061/(ASCE)CC.1943-5614.0000086 ↗
23. A review of methods for strengthening of masonry arches with composite materials10.1016/j.engstruct.2018.05.070 ↗
24. Extrados strengthening of brick masonry arches with PBO–FRCM composites: Experimental and analytical investigations10.1016/j.compstruct.2016.04.030 ↗
25. Structural behaviour of masonry arch with no-horizontal springing settlement
26. Shear strengthening of reinforced concrete members with textile reinforced mortar (TRM) jackets
27. 2004
28. Strengthening masonry arches with composite materials10.1061/(ASCE)1090-0268(2007)11:1(33) ↗
29. Intrados strengthening of brick masonry arches with different FRCM composites: Experimental and analytical investigations10.1016/j.compstruct.2017.06.023 ↗
30. Trm strengthening of masonry arches: An experimental investigation on the effect of strengthening layout and textile fibre material10.1016/j.compositesb.2019.04.026 ↗
31. 10 - fabric-reinforced cementitious matrix (FRCM) composites: Mechanical behavior and application to masonry walls
32. Retrofitting of masonry vaults by basalt textile-reinforced mortar overlays10.1080/15583058.2019.1597947 ↗
33. Out-of-plane response of masonry walls strengthened using textile-mortar system10.1016/j.conbuildmat.2018.01.026 ↗
34. Textile-reinforced mortar as strengthening material for masonry arches10.1080/15583058.2012.704480 ↗
35. A review on the tensile properties of natural fiber reinforced polymer composites10.1016/j.compositesb.2011.01.010 ↗
36. Experimental characterization of natural-fibre-soil interaction:lessons for earthen construction10.1617/s11527-021-01703-z ↗
37. Mechanical characterisation of flax and jute textile-reinforced mortars10.1016/j.conbuildmat.2020.121564 ↗
38. A review of the recent developments in biocomposites based on natural fibres and their application perspectives10.1016/j.compositesa.2015.06.007 ↗
39. 11 - the environmental impact of natural fiber composites through life cycle assessment analysis
40. Plant-based natural fibre reinforced cement composites: A review10.1016/j.cemconcomp.2016.02.014 ↗
41. Influence of natural fibers characteristics on the interface mechanics with cement based matrices10.1016/j.compositesb.2017.12.016 ↗
42. Shear capacity of masonry walls externally strengthened using flax-trm composite systems: Experimental tests and comparative assessment10.1016/j.conbuildmat.2020.120490 ↗
43. Microstructure and mechanical properties of waste fibre–cement composites10.1016/j.cemconcomp.2004.09.009 ↗
44. Properties of natural fibre composites for structural engineering applications10.1016/j.compositesb.2017.10.038 ↗
45. Mechanical performance of natural fiber-reinforced composites for the strengthening of masonry10.1016/j.compositesb.2015.03.021 ↗
46. Thermal and structural properties of a hemp–lime biocomposite10.1016/j.conbuildmat.2013.07.096 ↗
47. Experimental, analytical and numerical analysis to investigate the tensile behaviour of hemp fibre yarns10.1016/j.compstruct.2018.02.074 ↗
48. Out-of-plane strengthening of adobe masonry using hemp fibre ropes: An experimental investigation10.1016/j.engstruct.2021.112931 ↗
49. Eco-friendly composites for brake pads from agro waste: A review
50. Hemp fiber and its composites–a review10.1177/0021998311413623 ↗
51. Industrial hemp fibers: an overview10.3390/fib7120106 ↗
52. Natural fibres: can they replace glass in fibre reinforced plastics?10.1016/S0266-3538(03)00096-4 ↗
53. Mechanical behaviour of cementitious composites reinforced with bagasse and hemp fibers10.1016/j.conbuildmat.2019.117856 ↗
54. Effects of hemp fibers on characteristics of cement based mortar10.1016/j.conbuildmat.2018.03.029 ↗
55. Carbon storage potential in natural fiber composites10.1016/S0921-3449(02)00173-8 ↗
56. What is the technical and environmental interest in reusing a recycled polypropylene–hemp fibre composite?10.1016/j.polymdegradstab.2011.08.003 ↗
57. Life cycle assessment of a novel hybrid glass-hemp/thermoset composite10.1016/j.jclepro.2012.11.038 ↗
58. 2016
59. Methods of test for mortar for masonry determination of flexural and compressive strength of hardened mortar, European Standard UNI EN 1015-11.
60. Fiber bragg grating technology fundamentals and overview10.1109/50.618320 ↗
61. Development of fiber bragg grating sensors for monitoring civil infrastructure10.1016/j.engstruct.2005.04.023 ↗
62. Optical sensors based on fiber bragg gratings for structural health monitoring
63. Experimental behaviour of damaged masonry arches strengthened with steel fiber reinforced mortar (SFRM)10.1016/j.compositesb.2019.107386 ↗
64. Experimental and analytical investigations on sustainable and innovative strengthening systems for masonry arches10.1016/j.compstruct.2018.11.054 ↗
65. Experimental and numerical analyses of strengthened rammed earth masonry arches10.1016/j.compstruc.2020.106329 ↗
66. Laboratory and numerical analysis of failure of stone masonry arches with and without reinforcement10.1016/j.engfailanal.2021.105272 ↗
67. The safety of masonry arches with uncertain geometry10.1016/j.compstruc.2017.04.003 ↗
68. Dynamic response of masonry arch with geometrical irregularities subjected to a pulse-type ground motion10.1007/s11071-017-3897-z ↗
69. Seismic capacity of masonry arches with irregular abutments and arch thickness10.1016/j.conbuildmat.2018.12.063 ↗
70. Effect of shape uncertainties on the collapse condition of the circular masonry arch10.1007/978-3-030-50460-1_27 ↗
71. Quantifying the effect of geometric uncertainty on the structural behaviour of arches developed from direct measurement and structure-from-motion (SfM) photogrammetry10.1016/j.engstruct.2020.111710 ↗
72. Analytical and numerical DDA analysis on the collapse mode of circular masonry arches10.1016/j.engstruct.2013.12.023 ↗