journal article·2021-12Open access

Study of a binder based on alkaline activated limestone

Annelise Cousture, Norbert Renault, Jean-Louis Gallias, Khadim Ndiaye

Abstract

Abstract Binders based on the alkaline activation of raw materials is a subject of increasing importance for construction. This study focuses on a new non-hydraulic binder based on the alkali-activation of limestone by an aqueous solution of sodium hydroxide. An optimized mortar of about 20 MPa compressive strength, made with siliceous sand, was studied by XRD, FTIR and SEM-EDX analyses showing that crystalline pirssonite and portlandite are the reaction products responsible of the cohesive capacity of the binder. A methodology based on thermal gravimetric analysis was applied to quantify the products formed and the consumption of reagents with high reliability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. The action of alkalis on blast furnace slag
2. Davidovits · 2008
3. Shi · 2006
4. Provis · 2009
5. Provis · 2014
6. Alkali-activated binders: a review part 1. Historical background, terminology, reaction mechanisms and hydration products10.1016/j.conbuildmat.2007.10.015 ↗
7. A review on alkaline activation: new analytical perspectives
8. One-part alkali-activated materials: a review10.1016/j.cemconres.2017.10.001 ↗
9. Review on designs and properties of multifunctional alkali-activated materials (AAMs)10.1016/j.conbuildmat.2018.12.157 ↗
10. Microstructural characterization of geopolymers synthesized from kaolinite/stilbite mixtures using XRD, MAS-NMR, SEM/EDX, TEM/EDX, and HREM10.1016/S0008-8846(02)00859-1 ↗
11. Influence of NaOH concentration on microstructure and properties of cured alkali-activated calcined clay10.1016/j.jobe.2017.04.012 ↗
12. Alkaline activation of metakaolin fly ash mixtures: obtain of zeoceramics and zeocements10.1016/j.micromeso.2007.03.024 ↗
13. Thermogravimetric analysis and microstructure of alkali-activated metakaolin cement pastes10.1007/s10973-019-08592-z ↗
14. Influence of the initial water content in flash calcined metakaolin-based geopolymer10.1016/j.conbuildmat.2018.12.201 ↗
15. Marl-based geopolymers incorporated with limestone: a feasibility study10.1016/j.jnoncrysol.2018.04.015 ↗
16. Performance of alkali-activated slag mortars exposed to acids
17. The effects of ground granulated blast-furnace slag blending with fly ash and activator content on the workability and strength properties of geopolymer concrete cured at ambient temperature10.1016/j.matdes.2014.05.001 ↗
18. B.V. Rangan, D. Hardjito, S.E. Wallah, D.M.J. Sumajouw, Properties and application of fly-ash-based concrete, in: R. Wuhrer, M. Cortie (Eds.), Material Forum, vol. 30, ©Institute of materials Engineering Australasia Ltd., 2006, pp. 170–175.
19. Structure, mechanisms of reaction, and strength of an alkali-activated blast-furnace slag10.1111/jace.12620 ↗
20. Alkali activated composite binders of waste silica soda lime glass and blast furnace slag: strength as a function of the composition10.1016/j.conbuildmat.2016.05.064 ↗
21. Effect of high-temperature on the microstructure of alkali-activated binder
22. Gel nanostructure in alkali-activated binders based on slag and fly ash, and effects of accelerated carbonation10.1016/j.cemconres.2013.06.007 ↗
23. Production of geopolymeric binder from blended waste concrete powder and fly ash10.1016/j.conbuildmat.2012.04.044 ↗
24. Properties of inorganic polymer (geopolymer) mortars made of glass cullet10.1007/s10853-011-6107-2 ↗
25. Investigations on the durability of alkali-activated recycled glass
26. A new geopolymeric binder from hydrated-carbonated cement10.1016/j.matlet.2012.01.132 ↗
27. Chemical research and climate change as drivers in the commercial adoption of alkali activated materials10.1007/s12649-010-9015-9 ↗
28. Investigation of novel waste glass and limestone binders using statistical methods10.1016/j.conbuildmat.2015.02.085 ↗
29. Limestone as aggregate and precursor in binders of waste glass activated by CaO and NaOH10.1016/j.conbuildmat.2020.120013 ↗
30. An initial study on alkali activated limestone binders10.1016/j.cemconres.2019.04.002 ↗
31. P. Pichat, Fabrication d’un Matériau Solide à Partir d’un Hydroxyde Alcalin, Patent WO2006087484A3, 2006.
32. J-L. Gallias, A. Cousture, F. Forest, P. Pichat, Etude De L’activation Alcaline du Filler Calcaire Par L’hydroxyde De Sodium, NoMAD Conference, 7–8 Novembre 2015, Douai, France.
33. AFNOR, NF EN 196-1 Methods of Testing Cement-Part1: Determination of Strength, 2006.
34. AFNOR, ISO 679 Cement-Test Methods-Determination of Strength, 2009.
35. ASTM, C778 Standard Specification for Standard Sand, 2017.
36. ASTM, C305 Standard Specification for Mortar of Unit Masonry, 2019.
37. A. Cousture, N. Renault, P. Pichat, J-L. Gallias, Etude De L’activation Alcaline De Composés Calcaires Et Siliceux, NoMAD Conference, 7–8 Novembre 2018, Liège, Belgique.
38. AFNOR, NF P 18-452 Concretes — Measuring the Flow Time of Concretes and Mortars Using a Workabilitymeter, 2017.
39. ASTM, C230 Standard Specification for Flow Table for Use in Tests of Hydraulic Cement, 2021.
40. ASTM, C348 Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars, 2021.
41. ASTM, C349 Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure), 2018.
42. AFNOR, NF EN 1936 Natural Stone Test Methods: Determination of Real Density and Apparent Density, and of Total and Open Porosity, 2007.
43. AFNOR, NF P18-459 Test for Hardened Concrete: Porosity and Density Test, 2010.
44. ASTM, C830 Standard Test Method for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure, 2016.
45. Effect of sodium hydroxide concentration on strength and microstructure of alkali-activated natural Pozzolan and limestone powder mortar10.1016/j.conbuildmat.2020.121530 ↗
46. Infrared spectra, symmetry and structure relations of some carbonate minerals
47. Estep · 1970
48. Dehydration of natural gaylussite (Na2Ca(CO3)2, 5H2O) and pirssonite (Na2Ca(CO3)2, 2H2O) as illustrated by FTIR spectroscopy
49. Hydrated double carbonates – a Raman and infrared spectroscopic study10.1016/j.poly.2007.06.003 ↗
50. The power of databases: the RRUFF project
51. Estimation of the degree of hydration of blended cement pastes by a scannng electron microscope point-counting procedure10.1016/j.cemconres.2004.01.014 ↗
52. Direct three-dimensional observation of the microstructure and chemistry of C3S hydration10.1016/j.cemconres.2016.07.006 ↗
53. Experimental studies on the microstructural, physical and chemical characteristics of building derived materials to assess their suitability in ground improvement10.1016/j.conbuildmat.2017.09.058 ↗
54. Contribution à l’étude de la Gaylussite
55. Gaylussite: thermal properties by simultaneous thermal analysis
56. Effect of porosity on thermal expansion coefficient of cement pastes and mortars10.1016/j.conbuildmat.2011.09.010 ↗
57. The influence of different aggregates on the behavior and properties of gypsum mortars10.1016/j.cemconcomp.2018.06.007 ↗