Effect of crumb rubber on the punching shear behaviour of reinforced concrete slabs with openings
Source abstract
Abstract
Abstract This study aims to evaluate the mechanical properties of concrete incorporated with crumb rubber (CR), i.e. rubberised concrete, and investigate the punching shear behaviour of rubberised concrete slabs with openings adjacent to columns. For this purpose, four concrete mixtures with different percentages (0%, 5%, 10% and 20%) of CR as volume replacement for fine aggregates were prepared. Twelve slabs were cast (i.e. three slabs for each mixture). One slab had no opening, the second slab had an opening with a size of 100×100 mm2 and the third slab had an opening with a size of 150×150 mm2. Results showed that the use of CR exerted a negative effect on the mechanical properties of concrete. Meanwhile, the addition of up to 5% CR caused a slight reduction in the compressive strength, tensile strength and flexural strength of rubberised concrete. The experimental results indicated that the punching shear strength and stiffness of rubberised concrete slabs decreased with increasing CR. However, the toughness of the test specimens increased by using CR content up to 5% and then declined for 10% and 20% CR contents. Openings in flat slabs adjacent to the column face cause a significant reduction in punching shear strength, and punching shear strength decreases with an increase in opening size. Finally, the accuracy of four design code equations, namely ACI 318-2014, ECP 203, BS8110 and Euro -2 in predicting the punching strength of rubberised concrete slabs with or without openings is evaluated and compared with the experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. M.A.-T. Mustafa, I. Hanafi, R. Mahmoud, B. Tayeh. Effect of partial replacement of sand by plastic waste on impact resistance of concrete: experiment and simulation, Structures, Elsevier, 2019. 519-526.10.1016/j.istruc.2019.06.008 ↗
2. Structural performance of dry-cast rubberized concrete pipes with steel and synthetic fibers10.1016/j.conbuildmat.2014.12.061 ↗
3. Recycling of waste tire rubber as aggregate in concrete: durability-related performance10.1016/j.jclepro.2015.08.046 ↗
4. Application of waste tire rubber and recycled aggregates in concrete products: A new compression casting approach10.1016/j.resconrec.2020.105353 ↗
5. Experimental and modelling study of mixture design optimisation of glass fibre-reinforced concrete with combined utilisation of Taguchi and Extreme Vertices Design Techniques10.1016/j.jmrt.2020.02.083 ↗
6. Experimental and numerical investigations of the influence of partial replacement of coarse aggregates by plastic waste on the impact load10.1080/19397038.2020.1774820 ↗
7. Use of recycled plastic as fine aggregate in cementitious composites: A review10.1016/j.conbuildmat.2020.119146 ↗
8. Eco-friendly concrete containing recycled plastic as partial replacement for sand10.1016/j.jmrt.2020.02.090 ↗
9. The effect of steam curing regimes on the chloride resistance and pore size of high–strength green concrete10.1016/j.conbuildmat.2021.122409 ↗
10. Influence of steam curing regimes on the properties of ultrafine POFA-based high-strength green concrete10.1016/j.jobe.2021.102204 ↗
11. Cementitious composites containing recycled tire rubber: an overview of engineering properties and potential applications10.1520/CCA10519J ↗
12. A study of the durability properties of waste tire rubber applied to self-compacting concrete10.1016/j.conbuildmat.2012.11.019 ↗
13. Mechanical Properties of Silica Fume Modified High-Volume Fly Ash Rubberized Self-Compacting Concrete10.3390/su13105571 ↗
14. Chemical attack on concrete containing a high volume of crumb rubber as a partial replacement to fine aggregate in engineered cementitious composite (ECC)
15. Effect of recycled glass powder on properties of cementitious materials contains styrene butadiene rubber10.1007/s12517-018-4212-0 ↗
16. Evaluation of mechanical and durability properties of crumb rubber concrete10.1016/j.conbuildmat.2017.08.131 ↗
17. Traditional, state-of-the-art and renewable thermal building insulation materials: An overview10.1016/j.conbuildmat.2019.04.102 ↗
18. Mechanical properties of recycled aggregate concrete containing crumb rubber and polypropylene fiber10.1016/j.conbuildmat.2019.07.245 ↗
19. Potential use of waste tire rubber as aggregate in cement concrete – A comprehensive review10.1016/j.conbuildmat.2019.07.198 ↗
20. Mechanical and deformation properties of rubberized engineered cementitious composite (ECC)10.1016/j.cscm.2020.e00385 ↗
21. Mechanical and durability properties of concrete based on recycled coarse and fine aggregates produced from demolished concrete10.1016/j.conbuildmat.2020.118421 ↗
22. R.A. Assaggaf, M.R. Ali, S.U. Al-Dulaijan, M. Maslehuddin, Properties of concrete with untreated and treated crumb rubber–A review, journal of materials research and technology (2021).10.1016/j.jmrt.2021.02.019 ↗
23. Combined effect of lightweight fine aggregate and micro rubber ash on the properties of cement mortar
24. Flexural behavior of reinforced concrete beams strengthened with ultra-high performance fiber reinforced concrete10.1016/j.conbuildmat.2016.12.094 ↗
25. Flexural shear behaviour of reinforced Crumbed Rubber Concrete beam10.1016/j.conbuildmat.2018.01.150 ↗
26. Experimental investigation on the effect of using crumb rubber and steel fibers on the structural behavior of reinforced concrete beams10.1016/j.conbuildmat.2020.119078 ↗
27. Flexural behavior of fiber reinforced self-compacting rubberized concrete beams10.31026/j.eng.2020.02.09 ↗
28. Flexural response of fiber reinforced concrete beams with waste tires rubber and recycled aggregate10.1016/j.jclepro.2020.123842 ↗
29. Prediction of shear behavior of steel fiber-reinforced rubberized concrete beams reinforced with glass fiber-reinforced polymer (GFRP) bars10.1016/j.compstruct.2020.113010 ↗
30. O. Youssf, M.A. ElGawady, J.E. Mills. Experimental investigation of crumb rubber concrete columns under seismic loading, Structures, Elsevier, 2015. 13-27.10.1016/j.istruc.2015.02.005 ↗
31. Ductility and cracking behavior of reinforced self-consolidating rubberized concrete beams10.1061/(ASCE)MT.1943-5533.0001699 ↗
32. Effects of crumb rubber aggregate on the static and fatigue performance of reinforced concrete slabs10.1016/j.compstruct.2019.111371 ↗
33. Damping dissipation properties of rubberized concrete and its application in anti-collision of bridge piers10.1016/j.conbuildmat.2019.117286 ↗
34. Mechanical and dynamic properties of high strength concrete with well graded coarse and fine tire rubber10.1016/j.conbuildmat.2020.118502 ↗
35. Review of dynamic behaviour of rubberised concrete at material and member levels, Journal of Building
36. Punching shear strength of slabs with openings and supported on rectangular columns
37. Effect of opening size and location on punching shear behaviour of two-way RC slabs10.1680/macr.14.00042 ↗
38. T. Ha, M.H. Lee, J. Park, D.J. Kim. Effects of openings on the punching shear strength of RC flat‐plate slabs without shear reinforcement, The structural design of tall and special buildings 24(15) (2015). 895-911.10.1002/tal.1217 ↗
39. Effect of openings on punching shear strength of reinforced concrete slabs-finite element investigation10.14359/51689871 ↗
40. D. Mostofinejad, N. Jafarian, A. Naderi, A. Mostofinejad, M. Salehi. Effects of openings on the punching shear strength of reinforced concrete slabs, Structures, Elsevier, 2020. 760-773.10.1016/j.istruc.2020.03.061 ↗
41. ASTM International · 2020
42. ASTM International · 2017
43. ASTM International · 2019
44. ASTM International · 2019
45. ASTM International · 2015
46. ASTM International, 2017. Standard Test Method for Bulk Density (Unit Weight) and Voids in Aggregate. ASTM International (ASTM C29/C29M – 17a). ASTM International, West Conshohocken, PA.
47. ASTM International, 2015. Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate. (ASTM C128 – 15). ASTM International, West Conshohocken, PA.
48. ASTM International · 2019
49. ASTM International · 2017
50. American Concrete Institute (ACI), “Standard practice for selecting proportions for normal, heavyweight and mass concrete,” ACI 211.1-91, American Concrete Institute, Famington Hills, Mich, USA, 2002.
51. International · 2020
52. International · 2018
53. ASTM International · 2017
54. ASTM International · 2018
55. ACI Committee 318, Building code requirements for structural concrete (ACI 318-2014) and commentary (ACI 318R-2014), American Concrete Institute,Farmington Hills, Mich, 2014.
56. Ministry of Housing, Utilities and Urban Communities, Egyptian code for design and construction of reinforced concrete structures (ECP 203-2018), 2018.
57. British Standards Institution · 1997
58. European Committee for Standardization, ’Eurocode 2: Design of concrete structures-Part 1, Brussels, December. 2004.