Preparation and action mechanism of temperature control materials for low-temperature cement
Source abstract
Abstract
Abstract Encountering natural gas hydrate (NGH) is inevitable in the process of drilling and the production of oil and gas wells in deep-sea and shallow formations. The heat released by the cement slurry during the hydration process will cause the decomposition of gas hydrates, which will lead to annular channelling. Our purpose is to improve the cementing quality and ensure the safety of oil and gas production. In this paper, temperature control phase change microcapsules (PCMCs) with dodecanol (DA)/n-decanoic acid (CA) composite phase change materials (PCMs) as the core and active silica as the shell were prepared by a chemical precipitation method to store and release heat reversibly, to reduce the hydration heat of cement and improve the early strength. Fourier infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and energy spectrometry (EDS) were used to test and analyse the chemical structure and microscopic morphology of the synthesized temperature-controlled phase change microcapsules. Differential scanning calorimetry (DSC) was used to determine the phase change characteristics of the phase change microcapsules. The thermal stability of the phase change microcapsules was measured by a thermogravimetric analyser (TG). The application of PCMCs in a low-temperature cement slurry was also investigated. The results showed that the synthesized microcapsules had good thermal stability with a phase transformation temperature of 12.4 ℃ and enthalpy of 1.65 J/g. PCMCs can effectively control the hydration heat of cement and reduce the rise of hydration temperature by 6.06% to 11.79%. In addition, PCMCs can slowly release heat to promote the hydration of cement in the later strength development, and improve the early compressive strength of cement in the range of 5 ℃ to 10 ℃.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Spacecraft and Cryogenic Technologies · Hybrid Renewable Energy Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Interface and crack propagation of cement-based composites with sulfonated asphalt and plasma-treated rock asphalt10.1016/j.conbuildmat.2020.118161 ↗
2. Controlling the heat evaluation of cement slurry system used in natural gas hydrate layer by micro-encapsulated phase change materials10.1016/j.solener.2018.04.035 ↗
3. A review of solidified natural gas (SNG) technology for gas storage via clathrate hydrates10.1016/j.apenergy.2018.02.059 ↗
4. Risk analysis on the blowout in deepwater drilling when encountering hydrate-bearing reservoir10.1016/j.oceaneng.2018.08.056 ↗
5. Preparation and evaluation of micro-encapsulated thermal control materials for oil well cement slurry10.1016/j.energy.2020.118175 ↗
6. Al Marhoon, High definition optical method for evaluation of casing - Cement microannulus (CCMA)10.1016/j.petrol.2020.107719 ↗
7. Study on the performance and mechanism of accelerators LSA-1 and LSA-2 for deepwater well cementing at low temperatures10.1016/j.jngse.2016.03.087 ↗
8. Numerical simulation of the stability of hydrate layer during well cementing in deep-water region10.1016/j.petrol.2019.02.003 ↗
9. Natural gas hydrates - A promising source of energy10.1016/j.jngse.2009.12.004 ↗
10. A novel fluid for use in oil and gas well construction to prevent the oil and gas leak from the wellbore10.1016/j.conbuildmat.2019.05.100 ↗
11. Converting hydration heat to achieve cement mixture with early strength and low hydrating-thermal dissipation10.1016/j.conbuildmat.2017.06.098 ↗
12. Study on a new cement for deepwater well cementing10.4028/www.scientific.net/AMM.174-177.1321 ↗
13. Controlling the early-age hydration heat release of cement paste for deep-water oil well cementing: A new composite designing approach10.1016/j.conbuildmat.2021.122949 ↗
14. Fly ash Class C based geopolymer for oil well cementing10.1016/j.petrol.2019.04.106 ↗
15. Thermal control effects and mechanism of slag and fly ash on heat development of cement slurry used in hydrate formation10.1016/j.jngse.2021.103967 ↗
16. Hydration heat of slag or fly ash in the composite binder at different temperatures10.1016/j.tca.2017.07.002 ↗
17. Optimization of concrete mix design to account for strength and hydration heat in massive concrete structures10.1016/j.cemconcomp.2019.05.005 ↗
18. Hydration heat, strength and microstructure characteristics of UHPC containing blast furnace slag10.1016/j.jobe.2020.101915 ↗
19. Hydration, shrinkage, pore structure and fractal dimension of silica fume modified low heat Portland cement-based materials10.1016/j.conbuildmat.2020.121952 ↗
20. Analysis of correlation between hydration heat release and compressive strength for blended cement pastes10.1016/j.conbuildmat.2020.120436 ↗
21. Microencapsulated phase change materials for enhancing the thermal performance of Portland cement concrete and geopolymer concrete for passive building applications10.1016/j.enconman.2016.11.061 ↗
22. A review of microencapsulated and composite phase change materials: Alteration of strength and thermal properties of cement-based materials10.1016/j.rser.2019.04.072 ↗
23. Phase change material thermal energy storage systems for cooling applications in buildings: A review10.1016/j.rser.2019.109579 ↗
24. A review on phase change materials for thermal energy storage in buildings: Heating and hybrid applications10.1016/j.est.2020.101913 ↗
25. Preparation and characterization of pavement materials with phase-change temperature modulation10.1007/s10973-018-7862-y ↗
26. Fundamental investigation on the frost resistance of mortar with microencapsulated phase change materials10.1016/j.cemconcomp.2020.103705 ↗
27. Compressive strength and hygric properties of concretes incorporating microencapsulated phase change material10.1016/j.conbuildmat.2019.06.156 ↗
28. A review on phase change materials integrated in building walls10.1016/j.rser.2010.08.019 ↗
29. Thermal conductivity and mechanical properties of a shape-stabilized paraffin/recycled cement paste phase change energy storage composite incorporated into inorganic cementitious materials10.1016/j.cemconcomp.2019.03.013 ↗
30. Mechanical properties and mechanism of wollastonite fibers reinforced oil well cement10.1016/j.conbuildmat.2020.120461 ↗
31. American Petroleum Institute, API RP 10B-2, Recommended practice for testing well cements, 2013, P.124, (n.d.).
32. Low hydration exothermic well cement system: The application of energy storage microspheres prepared by high-strength hollow microspheres carrying phase change materials10.1016/j.cemconcomp.2020.103907 ↗
33. Influence of halloysite nanotube on hydration products and mechanical properties of oil well cement slurries with nano-silica10.1016/j.conbuildmat.2020.118545 ↗
34. Effect of drying on cement-based materials pore structure as identified by mercury intrusion porosimetry A comparative study between oven-, vacuum-, and freeze-drying10.1016/S0008-8846(01)00594-4 ↗
35. Comparison of methods for arresting hydration of cement10.1016/j.cemconres.2011.06.003 ↗
36. Effect of drying procedures on pore structure and phase evolution of alkali-activated cements10.1016/j.cemconcomp.2018.12.003 ↗
37. Gas phase infrared spectrum of syn-vinyl alcohol produced by thermal decomposition of several alcohols and aldehydes10.1016/0022-2852(91)90119-U ↗
38. The Preparation and Characterization of Chitosan-Gelatin Microcapsules and Microcomposites with Fatty Acids as Thermal Energy Storage Materials10.1002/ente.201402178 ↗
39. Silicon dioxide/silicon interfacial strain analyzed by infrared spectroscopy10.1016/S0257-8972(97)00442-8 ↗
40. The construction of amphiphilic chemical modified nano silicon dioxide reinforced foam system10.1016/j.petrol.2021.108917 ↗
41. Adding olivine micro particles to Portland cement based wellbore cement slurry as a sacrificial material: A quest for the solution in mitigating corrosion of wellbore cement10.1016/j.cemconcomp.2021.104078 ↗
42. Formation of TEM- and XRD-undetectable gold clusters accompanying big gold particles on TiO2-SiO2 supports10.1016/j.solidstatesciences.2007.10.037 ↗
43. Investigation of microstructure of C-S-H and micro-mechanics of cement pastes under NH4NO3 dissolution by 29Si MAS NMR and microhardness10.1016/j.measurement.2021.110019 ↗
44. Characteristic of silica nanoparticles on mechanical performance and microstructure of sulphoaluminate cement/ordinary Portland cement binary blends10.1016/j.conbuildmat.2020.118158 ↗
45. Hydration of calcium sulfoaluminate cements - Experimental findings and thermodynamic modelling10.1016/j.cemconres.2009.08.014 ↗
46. Comparison between the effects of phosphorous slag and fly ash on the C-S-H structure, long-term hydration heat and volume deformation of cement-based materials10.1016/j.conbuildmat.2020.118807 ↗
47. Effect of limestone powder in manufactured sand on the hydration products and microstructure of recycled aggregate concrete10.1016/j.conbuildmat.2018.08.147 ↗
48. The degree of hydration assessment of blended cement pastes by differential thermal and thermogravimetric analysis. Morphological evolution of the solid phases10.1016/j.tca.2014.08.008 ↗
49. J.I. Bhatty, Hydration versus strength in a portland cement developed from domestic mineral wastes — a comparative study, Thermochim. Acta 106 (1986) 93–103. https://doi.org/https://doi.org/10.1016/0040-6031(86)85120-6.10.1016/0040-6031(86)85120-6 ↗
50. D.S. Klimesch, A. Ray, The use of DTA/TGA to study the effects of ground quartz with different surface areas in autoclaved cement: quartz pastes. Part 1: A method for evaluating DTA/TGA results, Thermochim. Acta 289 (1996) 41–54. https://doi.org/https://doi.org/10.1016/S0040-6031(96)03033-X.10.1016/S0040-6031(96)03033-X ↗
51. Evolution of pore structure of oil well cement slurry in suspension–solid transition stage10.1016/j.conbuildmat.2019.04.075 ↗