journal article·2021-12

Impact of Ni(Ⅱ) and Cd(Ⅱ) on the hydration and microstructure of cement pastes for immobilization: C-A-S-H composition and binding characteristic

Minghao Liu, Yading Zhao, Zhenyun Yu, Zhenggang Cao

Publisher page

Abstract

Abstract In this work, the impact of two heavy metal cations, Ni2+ and Cd2+, on the hydration and microstructure of cement pastes were studied to better understand their binding characteristics in immobilization process. The addition of Ni2+ and Cd2+ exhibits an accelerating effect on early hydration kinetics. The compressive strengths of cement pastes incorporated with Ni2+ closely correlate to the capillary pore volume. The increase in the size and volume of large pores in the presence of Cd2+ leads to a considerable reduction of compressive strength. Ni2+ and Cd2+ are mainly bound into the outer products (OP) of hydrated cement pastes and the binding characteristics are connected with the OP composition. Ni2+ could precipitate as hydroxides and intermix with C-A-S-H or be adsorbed by deprotonated silanol groups. Cd2+ are mainly bound with two deprotonated silanol groups at the bridging position. The binding of Ni2+ and Cd2+ on the deprotonated silanol groups in C-A-S-H substitutes partial Ca2+ for charge compensation. More Ca2+ in the pore solution are available for the nucleation and growth of hydration products to accelerate the early hydration kinetics.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Preparation of sulphate aluminate cement amended bentonite and its use in heavy metal adsorption10.1016/j.jclepro.2020.120700 ↗
2. Review on form-stable inorganic hydrated salt phase change materials: Preparation, characterization and effect on the thermophysical properties10.1016/j.apenergy.2021.116845 ↗
3. A critical review on various remediation approaches for heavy metal contaminants removal from contaminated soils10.1016/j.chemosphere.2021.132369 ↗
4. Sustainable natural pozzolana concrete – A comparative study on its environmental performance against concretes with other industrial by-products10.1016/j.conbuildmat.2020.121429 ↗
5. The mechanisms of heavy metal immobilization by cementitious material treatments and thermal treatments: A review10.1016/j.jenvman.2017.02.026 ↗
6. Immobilisation of heavy metal in cement-based solidification/stabilisation: a review10.1016/j.wasman.2008.01.019 ↗
7. Mechanisms and modelling of antimonate leaching in hydrated cement paste suspensions10.1016/j.cemconres.2012.06.004 ↗
8. Selenite and selenate uptaken in ettringite: Immobilization mechanisms, coordination chemistry, and insights from structure10.1016/j.cemconres.2017.07.004 ↗
9. Analysis of barium retention mechanisms on calcium silicate hydrate phases10.1016/j.cemconres.2016.12.004 ↗
10. Competition behaviour of metal uptake in cementitious systems: An XRD and EXAFS investigation of Nd- and Zn-loaded 11Å tobermorite10.1016/j.pce.2014.01.001 ↗
11. Advances in encapsulation technologies for the management of mercury-contaminated hazardous wastes10.1016/j.jhazmat.2004.08.010 ↗
12. The coupling effect of calcium concentration and pH on early hydration of cement10.1016/j.conbuildmat.2018.07.067 ↗
13. Effect of magnesium on calcium silicate hydrate (C-S-H)10.1016/j.cemconres.2017.03.012 ↗
14. Hydration of Portland cements in solutions containing high concentration of borate ions: Effects of LiOH10.1016/j.cemconcomp.2019.04.010 ↗
15. The influence of sodium and potassium hydroxide on alite hydration: Experiments and simulations10.1016/j.cemconres.2012.07.003 ↗
16. Ion-specific effects influencing the dissolution of tricalcium silicate10.1016/j.cemconres.2014.02.006 ↗
17. The influence of sodium salts and gypsum on alite hydration10.1016/j.cemconres.2015.04.015 ↗
18. Impact of NaOH and Na2SO4 on the kinetics and microstructural development of white cement hydration10.1016/j.cemconres.2018.03.017 ↗
19. Characterisation of products of tricalcium silicate hydration in the presence of heavy metals10.1016/j.jhazmat.2007.01.136 ↗
20. Managing trace elements in Portland cement – Part I: Interactions between cement paste and heavy metals added during mixing as soluble salts10.1016/j.cemconcomp.2010.06.002 ↗
21. Early hydration of C3S in the presence of Cd2+, Pb2+ and Cr3+ and the immobilization of heavy metals in pastes10.1016/j.conbuildmat.2017.07.026 ↗
22. Immobilization of Cr(VI) by hydrated Portland cement pastes with and without calcium sulfate10.1016/j.jhazmat.2017.07.039 ↗
23. Mineralogical study of high SO3 clinker produced using waste gypsum board in a cement kiln10.1016/j.conbuildmat.2019.05.098 ↗
24. Microstructure of cement paste incorporating high volume of low-grade metakaolin10.1016/j.cemconcomp.2019.103453 ↗
25. Analysis of pore structure, contact angle and pore entrapment of blended cement pastes from mercury porosimetry data10.1016/j.cemconcomp.2012.06.005 ↗
26. Evolution of pore structure in blended systems10.1016/j.cemconres.2015.02.025 ↗
27. Investigation on the effect of entrained air on pore structure in hardened concrete using MIP10.1016/j.conbuildmat.2021.123441 ↗
28. Hydration, shrinkage, pore structure and fractal dimension of silica fume modified low heat Portland cement-based materials10.1016/j.conbuildmat.2020.121952 ↗
29. Activation of Portland cement blended with high volume of fly ash using Na2SO410.1016/j.cemconcomp.2019.103417 ↗
30. Hydration and properties of nano-TiO2 blended cement composites10.1016/j.cemconcomp.2012.02.009 ↗
31. Effect of the hydration temperature on the microstructure of Class G cement: C-S-H composition and density10.1016/j.cemconres.2017.02.008 ↗
32. Calcium-silicate-hydrate seeds as an accelerator for saving energy in cold weather concreting10.1016/j.conbuildmat.2020.120191 ↗
33. Scrivener · 2016
34. Comparative study of immobilization and mechanical properties of sulfoaluminate cement and ordinary Portland cement with different heavy metals10.1016/j.conbuildmat.2018.10.206 ↗
35. Microstructure and properties of fly ash/cement-based pastes activated with MgO and CaO under hydrothermal conditions10.1016/j.cemconcomp.2020.103739 ↗
36. Effect of temperature on the microstructure of calcium silicate hydrate (C-S-H)10.1016/j.cemconres.2013.06.008 ↗
37. Ordinary Portland Cement composition for the optimization of the synergies of supplementary cementitious materials of ternary binders in hydration processes10.1016/j.cemconcomp.2017.12.016 ↗
38. Performance of cement pastes containing sewage sludge ash at elevated temperatures10.1016/j.conbuildmat.2019.03.290 ↗
39. Hydration development of mineral additives blended cement using thermogravimetric analysis (TGA): Methodology of calculating the degree of hydration10.1016/j.conbuildmat.2017.04.132 ↗
40. The impact of carbon-based nanomaterial additions on the hydration reactions and kinetics of GGBS-modified cements10.1016/j.conbuildmat.2021.124366 ↗
41. The relation between porosity, hydration degree and compressive strength of Portland cement pastes in the presence of aluminum chloride additive10.1016/j.conbuildmat.2020.118884 ↗
42. The structure and stoichiometry of C-S-H10.1016/j.cemconres.2004.04.035 ↗
43. Structure, Fractality, Mechanics and Durability of Calcium Silicate Hydrates10.3390/fractalfract5020047 ↗
44. Composition of C-S–H in pastes with increasing levels of silica fume addition10.1016/j.cemconres.2015.04.016 ↗
45. Calcium silicate hydrates: Solid and liquid phase composition10.1016/j.cemconres.2015.03.019 ↗
46. Influence of calcium to silica ratio on aluminium uptake in calcium silicate hydrate10.1016/j.cemconres.2016.01.014 ↗
47. Optimization of SEM-EDS to determine the C-A–S–H composition in matured cement paste samples10.1016/j.matchar.2016.11.041 ↗
48. Backscattered electron imaging of cementitious microstructures: understanding and quantification10.1016/j.cemconcomp.2004.02.029 ↗
49. Investigation of microstructure of C-S-H and micro-mechanics of cement pastes under NH4NO3 dissolution by 29Si MAS NMR and microhardness10.1016/j.measurement.2021.110019 ↗
50. Comparison between the effects of phosphorous slag and fly ash on the C-S-H structure, long-term hydration heat and volume deformation of cement-based materials10.1016/j.conbuildmat.2020.118807 ↗
51. Microscale Investigations of Ni Uptake by Cement Using a Combination of Scanning Electron Microscopy and Synchrotron-Based Techniques10.1021/es060957n ↗
52. Spectroscopic Investigation of Ni Speciation in Hardened Cement Paste10.1021/es052240q ↗
53. From C-S–H to C–A–S–H: Experimental study and thermodynamic modelling10.1016/j.cemconres.2014.10.020 ↗
54. Incorporation of aluminium in calcium-silicate-hydrates10.1016/j.cemconres.2015.04.007 ↗
55. The role of Al in C-S–H: NMR, XRD, and compositional results for precipitated samples10.1016/j.cemconres.2005.03.002 ↗
56. Effective cation exchange capacity of calcium silicate hydrates (C-S-H)10.1016/j.cemconres.2021.106393 ↗
57. Alkali uptake in calcium alumina silicate hydrate (C-A-S-H)10.1016/j.cemconres.2016.03.009 ↗
58. An atomistic building block description of C-S-H – Towards a realistic C-S-H model10.1016/j.cemconres.2018.01.007 ↗
59. Comparison of Ca(NO3)2 and CaCl2 Admixtures on Reaction, Setting, and Strength Evolutions in Plain and Blended Cementing Formulations10.1061/(ASCE)MT.1943-5533.0001240 ↗