Fractional viscoelastic modeling of modified asphalt mastics using response surface method
Source abstract
Abstract
The main aim of this study is to develop prediction equations of asphalt mastic fractional model parameters based on the fractional model parameters of asphalt binder, taking into consideration many parameters including, styrene–butadienestyrene (SBS) and polyphosphoric acid (PPA) modification, modifier’s dosage, volume filling rate of siliceous filler, and test temperature. Experimental tests were conducted on original, SBS- and PPA-modified asphalt binders and asphalt mastics fabricated with these binders by using a dynamic shear rheometer device to achieve this aim. The asphalt mastic samples were fabricated considering a couple of volume filling rates of siliceous filler: 18 and 35%. Then, a fractional viscoelastic and the generalized Maxwell model were implemented and compared to describe the viscoelastic behavior of binder and mastic samples. The results showed that the fractional viscoelastic model could accurately predict the viscoelastic behavior of the original and modified asphalt mastic using fewer parameters compared to the well-known generalized Maxwell model so that the fitting accuracy of all samples is more than 0.99. In addition, the response surface methodology (RSM) was used to develop the prediction equation between the parameters of modified asphalt binders and the correspondent asphalt mastic fractional model. R2 values of SBS and PPA prediction models for fractional model coefficients are between 0.89 and 0.96. The predictive models presented a high accuracy so that mastic parameters with asphalt binder parameters, additive’s percentage, temperature, and volume filling rate can be achieved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Transport Systems and Technology
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Hajikarimi · 2021
2. Linear viscoelastic behaviour of bituminous materials: From binders to mixes10.1080/14680629.2004.9689992 ↗
3. On the mechanical behavior of asphalt10.1016/j.mechmat.2004.09.005 ↗
4. Combined bituminous binder and mixture linear rheological properties10.1016/j.conbuildmat.2004.04.008 ↗
5. Modelling the linear viscoelastic rheological properties of bituminous binders10.1016/j.conbuildmat.2010.11.086 ↗
6. Implementing fractional viscoelastic model to evaluate low temperature characteristics of crumb rubber and gilsonite modified asphalt binders10.1016/j.conbuildmat.2013.09.001 ↗
7. 2008
8. Ottosen · 2005
9. Evaluation of rheological master curve models for bituminous binders10.1617/s11527-013-0191-5 ↗
10. C. Huet, Etude par une méthode d'impédance du comportement viscoélastique des matériaux hydrocarbonés, 1965.
11. Viscoelastic properties of bituminous mixtures
12. A modified HS model: numerical applications in modeling the response of bituminous materials10.1016/j.finel.2012.01.003 ↗
13. Complex modulus testing and rheological modeling of cold-recycled mixtures10.1520/JTE20180905 ↗
14. Modelling linear viscoelastic properties of asphalt concrete by the Huet-Sayegh model10.1080/10298430802524784 ↗
15. General “2S2P1D” model and relation between the linear viscoelastic behaviours of bituminous binders and mixes
16. 2S2P1D model calibration error from user panel for one Bitumen and one bituminous mixture10.1155/2019/6547025 ↗
17. Fractional derivative viscoelastic response model for asphalt binders10.1061/(ASCE)MT.1943-5533.0002716 ↗
18. Heterogeneous numerical modeling of asphalt concrete through use of a biphasic approach: Porous matrix/inclusions10.1016/j.commatsci.2012.11.041 ↗
19. Two-dimensional/three-dimensional biphasic modelling of the dynamic modulus of bituminous materials10.1080/19648189.2013.786243 ↗
20. Assessing the effect of fillers on LVE properties of asphalt mastics at intermediate temperatures10.1617/s11527-020-01532-6 ↗
21. Is low-temperature creep of asphalt mastic independent of filler shape and mineralogy?—arguments from multiscale analysis10.1061/(ASCE)0899-1561(2005)17:5(485) ↗
22. Assessment of existing micro-mechanical models for asphalt mastics considering viscoelastic effects10.1080/14680629.2008.9690106 ↗
23. Effect of filler on thermodynamic and mechanical behaviour of asphalt mastic: a MD simulation study10.1080/10298436.2018.1535120 ↗
24. Rheological evaluation of modified bitumen by EVA and crumb rubber using RSM optimization10.1155/2021/9825541 ↗
25. A RSM-based multi-response optimization application for determining optimal mix proportions of standard ready-mixed concrete10.1007/s13369-015-1987-0 ↗
26. Investigating permanent deformation of recycled asphalt concrete containing waste oils as rejuvenator using response surface methodology (RSM)10.1007/s40996-020-00485-8 ↗
27. Determination of optimal mix from the standpoint of short term aging based on asphalt mixture fracture properties using response surface method10.1016/j.conbuildmat.2018.05.078 ↗
28. Modelling of waste rubber and glass fibber with response surface method in hot mix asphalt10.1016/j.conbuildmat.2019.117070 ↗
29. Investigating the rheological properties of asphalt binder incorporating different crumb rubber contents based on a response surface methodology
30. On the fractional calculus model of viscoelastic behavior10.1122/1.549887 ↗
31. Generalized fractional viscoelastic modeling of low temperature characteristics of asphalt binders modified with polyphosphoric acid and distillate aromatic extracts oil10.1061/(ASCE)MT.1943-5533.0002353 ↗
32. Using fundamental material properties to predict the moisture susceptibility of the asphalt binder: polarizability and a moisture-induced shear-thinning index10.1021/acsabm.0c00374 ↗
33. Moisture damage and its relation to surface adsorption/desorption of rejuvenators10.1021/acs.iecr.0c02534 ↗
34. B. Howard, The Surprising History of Road Salt, https://news.nationalgeographic.com/news/2014/02/140212-road-salt-shortages-melting-ice-snow-science/ 2014. (Accessed July 27 2021).
35. C. Corporation., How does road salt work?, https://www.csx.com/index.cfm/library/files/customers/commodities/minerals/how-does-road-salt-work/2016. (Accessed July 27 2021).
36. N.A.D. Program., Acid Rain. [Online], Available at: http://nadp.slh.wisc.edu/educ/acidrain.aspx, 2019. (Accessed July 20 2019).
37. R. Casiday, R. Frey, Acid rain, Inorganic Reactions Experiment, Washington University, Word Wide Web Address: http://www. chemistry. wustl. edu/∼ edudev/LabTutorials/Water/FreshWater/acidrain. html (1998).
38. Evaluation of the properties and microstructure of SBS and EVA polymer modified bitumen10.1016/j.conbuildmat.2007.07.013 ↗
39. Investigating the toughness and fatigue behavior of conventional and SBS modified asphalt mixes10.1016/j.conbuildmat.2013.05.044 ↗
40. An investigation on the effect of SBS+ vacuum bottoms residue modification on rheological characteristics of asphalt binder10.1080/10916466.2017.1384839 ↗
41. An investigation on the effect of SBS+Vacuum bottoms residue modification on rheological characteristics of asphalt binder10.1080/10916466.2017.1384839 ↗
42. Polymer modified asphalt binders10.1016/j.conbuildmat.2005.07.007 ↗
43. D. Oldham, Implications of bio-modification on moisture damage mechanisms in asphalt binder matrix, 2020.
44. Active mineral fillers arrest migrations of alkane acids to the interface of bitumen and siliceous surfaces10.1021/acssuschemeng.9b00352 ↗
45. Surface functionalization of silica nanoparticles to enhance aging resistance of asphalt binder10.1016/j.conbuildmat.2019.03.257 ↗
46. ASTM, ASTM D566-20, Standard Test Method for Dropping Point of Lubricating Grease, ASTM International, West Conshohocken, PA., 2020.
47. S. Alexander, Method of treating asphalt, US Patent 3(751) (1973) 278.
48. G. Orange, D. Dupuis, J. Martin, F. Farcas, C. Such, B. Marcant, Chemical modification of bitumen through polyphosphoric acid: properties-micro-structure relationship, Proceedings of the 3rd eurasphalt and Eurobitume congress held Vienna, may 2004, 2004.
49. Low temperature rheology of polyphosphoric acid (PPA) added bitumen10.1016/j.conbuildmat.2012.06.011 ↗
50. Rheological property investigations for polymer and polyphosphoric acid modified asphalt binders at high temperatures10.1016/j.conbuildmat.2014.04.082 ↗
51. Mechanical behavior of polymer-modified bituminous mastics. I: experimental approach10.1061/(ASCE)MT.1943-5533.0002548 ↗
52. Stiffening mechanisms of asphalt–aggregate mixtures: From binder to mixture10.3141/2181-11 ↗
53. Particle size analysis by laser diffraction10.1144/GSL.SP.2004.232.01.08 ↗
54. ASTM, ASTM D7175-15, Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer, ASTM International, West Conshohocken, PA., 2015.
55. Implementing general power law to interconvert linear viscoelastic functions of modified asphalt binders10.1061/JPEODX.0000038 ↗
56. Mechanical behavior of polymer-modified bituminous mastics. II: numerical approach10.1061/(ASCE)MT.1943-5533.0002593 ↗