Multiscale modelling framework for elasticity of ultra high strength concrete using nano/microscale characterization and finite element representative volume element analysis
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Rock Mechanics and Modeling
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (99)
Show source-provided references
1. Shanaka · 2016
2. S. Kristombu Baduge, P. Mendis, T. Ngo, W. Fernando, B. Waduge, Structural Feasibility of Very-High Strength Concrete (100–150 MPa) for Tall Buildings, in: 6th Int. Conf. Struct. Eng. Constr. Manag., 2015.
3. S. Kristombu Baduge, P. Mendis, T. Ngo, Ductility design of high-strength reinforced concrete columns for super-tall buildings, in: 4th Int. Conf. Struct. Eng. Constr. Manag., 2013.
4. A multiscale micromechanics-hydration model for the early-age elastic properties of cement-based materials10.1016/S0008-8846(03)00039-5 ↗
5. Creep effects in nanoindentation of hydrated phases of cement pastes10.1016/j.matchar.2009.04.008 ↗
6. Application of multiscale elastic homogenization based on nanoindentation for high performance concrete10.1016/j.advengsoft.2013.04.007 ↗
7. An Investigation of Nanomechanical Properties of Materials using Nanoindentation and Artificial Neural Network
8. The effect of two types of C-S-H on the elasticity of cement-based materials: Results from nanoindentation and micromechanical modeling10.1016/S0008-8846(03)00230-8 ↗
9. Nanoindentation-based micromechanical characterisation of ultra-high-performance concrete exposed to freezing–thawing10.1680/jmacr.20.00164 ↗
10. The nano-mechanical signature of Ultra High Performance Concrete by statistical nanoindentation techniques10.1016/j.cemconres.2008.09.002 ↗
11. Characterization of impact damage in ultra-high performance concrete using spatially correlated nanoindentation/SEM/EDX10.1007/s11665-013-0668-y ↗
12. Identification of Transversely Isotropy of Calcium Silicate Hydrate using Nanoindentation and Finite Element Analysis
13. Ueber die Beziehung zwischen den beiden Elasticitätsconstanten isotroper Körper10.1002/andp.18892741206 ↗
14. Berechnung der Fließgrenze von Mischkristallen auf Grund der Plastizitätsbedingung für Einkristalle., ZAMM - Zeitschrift Für Angew
15. Average stress in matrix and average elastic energy of materials with misfitting inclusions10.1016/0001-6160(73)90064-3 ↗
16. A self-consistent mechanics of composite materials10.1016/0022-5096(65)90010-4 ↗
17. A numerical method for computing the overall response of nonlinear composites with complex microstructure10.1016/S0045-7825(97)00218-1 ↗
18. N. Mitra, ; Prodip Sarkar, ; Sutapa Deb, S.B. Majumder, Multiscale Estimation of Elastic Constants of Hydrated Cement, (2019). https://doi.org/10.1061/(ASCE)EM.1943.10.1061/(ASCE)EM.1943-7889.0001582 ↗
19. Predicting the mechanical properties of ordinary concrete and nano-silica concrete using micromechanical methods, Sadhana - Acad. Proc
20. Elastic properties of self-compacting concrete modified with nanoparticles: Multiscale approach10.1016/j.acme.2019.06.006 ↗
21. Micromechanical characterization and modeling of cement pastes containing waste marble powder10.1016/j.jclepro.2018.05.284 ↗
22. Cohesive-strength homogenisation model of porous and non-porous materials using linear comparison composites and application
23. Upscaling quasi-brittle strength of cement paste and mortar: A multi-scale engineering mechanics model10.1016/j.cemconres.2011.01.010 ↗
24. Computational thermal homogenization of concrete10.1016/j.cemconcomp.2012.08.026 ↗
25. Multi-scale composite models for the effective thermal conductivity of PCM-concrete10.1016/j.conbuildmat.2013.06.068 ↗
26. Computational homogenization of diffusion in three-phase mesoscale concrete10.1007/s00466-014-0998-0 ↗
27. Macroscopic diffusivity in concrete determined by computationalhomogenization10.1002/nag.2097 ↗
28. C. Zhou K. Li Numerical and statistical analysis of permeability of concrete as a random heterogeneous composite Comput. Concr. 7 2010 469 482 https://doi.org/10.12989/cac.2010.7.5.469.10.12989/cac.2010.7.5.469 ↗
29. Computational homogenization of effective permeability in three-phase mesoscale concrete10.1016/j.conbuildmat.2016.05.141 ↗
30. Numerical evaluation of the representative volume element for random composites10.1016/j.euromechsol.2020.104181 ↗
31. Determining a representative volume element capturing the morphology of fibre reinforced polymer composites10.1016/j.compscitech.2006.04.004 ↗
32. Representative volume: Existence and size determination10.1016/j.engfracmech.2006.12.021 ↗
33. Determination of the critical size of a statistical representative volume element (SRVE) for carbon reinforced polymers10.1016/j.actamat.2006.03.042 ↗
34. Determination of the size of the representative volume element for random composites: Statistical and numerical approach10.1016/S0020-7683(03)00143-4 ↗
35. A micromechanics-based nonlocal constitutive equation and estimates of representative volume element size for elastic composites10.1016/0022-5096(96)00007-5 ↗
36. Material spatial randomness: From statistical to representative volume element10.1016/j.probengmech.2005.07.007 ↗
37. Model for the microstructure of calcium silicate hydrate in cement paste10.1016/S0008-8846(99)00209-4 ↗
38. The nanogranular nature of C-S-H10.1016/j.jmps.2006.06.003 ↗
39. Spherical and acicular representation of hydrates in a micromechanical model for cement paste: Prediction of early-age elasticity and strength10.1007/s00707-008-0007-9 ↗
40. A realistic molecular model of cement hydrates10.1073/pnas.0902180106 ↗
41. Refinements to colloid model of C-S-H in cement: CM-II10.1016/j.cemconres.2007.10.006 ↗
42. Aggregate-Dependent Approach to Formulate and Predict Properties of High-Strength and Very-High-Strength Concrete10.1061/(ASCE)MT.1943-5533.0003055 ↗
43. Understanding failure and stress-strain behavior of very-high strength concrete (>100 MPa) confined by lateral reinforcement10.1016/j.conbuildmat.2018.08.192 ↗
44. Surface roughness criteria for cement paste nanoindentation10.1016/j.cemconres.2007.11.014 ↗
45. Surappa, Synthesis of fly ash particle reinforced A356 Al composites and their characterization10.1016/j.msea.2007.06.068 ↗
46. Evaluation of Strengths from Cement Hydration and Slag Reaction of Mortars Containing High Volume of Ground River Sand and GGBF Slag
47. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
48. Van Vliet, Grid indentation analysis of composite microstructure and mechanics: Principles and validation10.1016/j.msea.2006.05.125 ↗
49. On the use of nanoindentation for cementitious materials10.1007/BF02479557 ↗
50. Statistical indentation techniques for hydrated nanocomposites: Concrete, bone, and shale10.1111/j.1551-2916.2007.02012.x ↗
51. Critical aspects of nano-indentation technique in application to hardened cement paste10.1016/j.cemconres.2010.09.001 ↗
52. Assessment of the elastic properties of amorphous calcium silicates hydrates (I) and (II) structures by molecular dynamics simulation10.1080/08927022.2017.1373191 ↗
53. The nanogranular behavior of C-S-H at elevated temperatures (up to 700 °C)10.1016/j.cemconres.2006.09.006 ↗
54. A reliable technique to determine the local mechanical properties at the nanoscale for cementitious materials10.1016/j.cemconres.2007.07.001 ↗
55. Experimental study on modulus and hardness of ettringite10.1111/j.1747-1567.2011.00744.x ↗
56. Modeling the linear elastic properties of Portland cement paste10.1016/j.cemconres.2005.05.001 ↗
57. Nanoindentation-probed Oliver-Pharr half-spaces in alkali-activated slag-fly ash pastes: Multimethod identification of microelasticity and hardness
58. J. Němeček, V. Šmilauer, L. Kopecký, Characterization of Alkali-Activated Fly-Ash by Nanoindentation, in: Nanotechnol. Constr. 3, Springer Berlin Heidelberg, 2009: pp. 337–343. https://doi.org/10.1007/978-3-642-00980-8_45.10.1007/978-3-642-00980-8_45 ↗
59. THRESHOLD SELECTION METHOD FROM GRAY-LEVEL HISTOGRAMS10.1109/TSMC.1979.4310076 ↗
60. Numerical simulation of hydration and microstructural development in hardening cement-based materials (I) theory10.1016/0008-8846(95)00017-8 ↗
61. D.P. Bentz CEMHYD3D: A Three-Dimensional Cement Hydration and Microstructure Development Modeling Package 2005 Version 3.0.10.6028/NIST.IR.7232 ↗
62. μic: A new platform for modelling the hydration of cements10.1016/j.cemconres.2008.12.002 ↗
63. J.W. Bullard, Virtual Cement and Concrete Testing Laboratory - Version 9.5 User Guide, (2014). https://doi.org/http://dx.doi.org/10.6028/NIST.SP.1173.10.6028/NIST.SP.1173 ↗
64. Three-dimensional computer simulation of portland cement hydration and microstructure development10.1111/j.1151-2916.1997.tb02785.x ↗
65. Analysis of CCRL proficiency cements 151 and 152 using the Virtual Cement and Concrete Testing Laboratory10.1016/j.cemconres.2006.05.024 ↗
66. Early development of properties in a cement paste: A numerical and experimental study10.1016/S0008-8846(03)00002-4 ↗
67. Prediction of setting for admixture modified mortars using the VCCTL10.1016/j.cemconcomp.2016.11.002 ↗
68. Determination by nanoindentation of elastic modulus and hardness of pure constituents of Portland cement clinker10.1016/S0008-8846(00)00505-6 ↗
69. Modelling elasticity of a hydrating cement paste10.1016/j.cemconres.2007.07.003 ↗
70. Prediction of elastic properties of cement pastes at early ages10.1016/j.commatsci.2009.11.003 ↗
71. Comparison of mechanical properties of compacted calcium hydroxide and portland cement paste systems10.1016/0008-8846(83)90030-3 ↗
72. Estimation of the modulus of elasticity of calcium hydroxide10.1016/0008-8846(86)90021-9 ↗
73. Micromechanical analysis of heterogeneous structural materials, in10.1016/j.cemconcomp.2012.06.015 ↗
74. Tensile strength of hydrated cement paste phases assessed by micro-bending tests and nanoindentation10.1016/j.cemconcomp.2016.07.010 ↗
75. Microstructure and mechanical properties of fly ash blended cement pastes10.1016/j.conbuildmat.2014.10.009 ↗
76. Micro-mechanical properties of alkali-activated fly ash evaluated by nanoindentation10.1016/j.conbuildmat.2017.04.176 ↗
77. Multiscale modelling for the ultra-high performance concrete: From hydration kinetics to macroscopic elastic moduli10.1016/j.conbuildmat.2020.118541 ↗
78. Determination of Mechanical Properties of Sand Grains by Nanoindentation10.1007/s11340-010-9373-z ↗
79. Micromechanics-based simulations of compressive and tensile testing on lime-based mortars10.1016/j.mechmat.2016.11.011 ↗
80. F. Wang B. Fu R.A. Mirshams W. Cooper R. Komanduri H. Lu . in: Conf. Proc. Soc. Exp. Mech. Ser., Mechanical properties measurement of sand grains by nanoindentation 2011 Springer New York, NY 121 130 10.1007/978-1-4419-9794-4_19.
81. Particle-based characterization of Ottawa sand: Shape, size, mineralogy, and elastic moduli10.1016/j.cemconcomp.2017.07.003 ↗
82. Multiscale simulations of concrete mechanical tests, in10.1016/j.cam.2012.01.009 ↗
83. Methodology for nanoindentation-assisted prediction of macroscale elastic properties of high performance cementitious composites10.1016/j.cemconcomp.2013.09.013 ↗
84. Brittle strength of basaltic rock masses with applications to Venus10.1029/93JE00691 ↗
85. Mechanical properties tests and multiscale numerical simulations for basalt fiber reinforced concrete10.1016/j.conbuildmat.2019.01.018 ↗
86. Stress-strain relationships and modulus of elasticity of rocks and of ordinary and high performance concretes10.1016/j.conbuildmat.2017.07.167 ↗
87. Understanding fracture mechanism and behaviour of ultra-high strength concrete using mesoscale modelling10.1016/j.engfracmech.2020.107080 ↗
88. Aggregate Geometry Generation Method Using a Structured Light 3D Scanner, Spherical Harmonics-Based Geometry Reconstruction, and Placing Algorithms for Mesoscale Modeling of Concrete10.1061/(ASCE)MT.1943-5533.0003851 ↗
89. Mesoscale Modelling of Concrete – A Review of Geometry Generation, Placing Algorithms, Constitutive Relations and Applications10.1016/j.engfracmech.2020.106974 ↗
90. Novel boundary conditions for strain localization analyses in microstructural volume elements10.1002/nme.3298 ↗
91. Multi-scale modelling of elastic/viscoelastic compounds10.1002/zamm.201200055 ↗
92. Strain-driven homogenization of inelastic microstructures and composites based on an incremental variational formulation10.1002/nme.515 ↗
93. Systèmes · Micromechanics Plugin For Abaqus/CAE · 2020 · 30
94. H. Ji, W. McLendon, J. Hurtado, V. Oancea, J. Bi, Multi-scale Material Modeling with the Mean-Field Homogenization Method, in: NAFEMS World Congr., Stockholm, 2017.
95. Three-dimensional micromechanical modeling of voided polymeric materials10.1016/S0022-5096(01)00060-6 ↗
96. Micromechanics, macromechanics and constitutive modeling of the elasto-viscoplastic deformation of rubber-toughened glassy polymers10.1016/j.jmps.2006.08.006 ↗
97. Micromechanics of Composite Materials 2013 Elsevier.
98. H.J. Böhm, A Short Introduction to Continuum Micromechanics, in: Mech. Microstruct. Mater., Springer Vienna, 2004: pp. 1–40. https://doi.org/10.1007/978-3-7091-2776-6_1.10.1007/978-3-7091-2776-6_1 ↗
99. Evaluation for elastic properties of metal matrix composites with randomly distributed fibers: Two-step mean-field homogenization procedure versus FE homogenization method10.1016/j.jallcom.2015.10.190 ↗