journal article·2021-03

RETRACTED: Laboratory investigation of the performance of binders and asphalt mixtures modified by carbon nano tube, poly phosphoric acid, and styrene butadiene rubber

Rezvan Babagoli

This record is marked as retracted by the source. Review the publisher’s notice before using its findings.
Publisher page

Abstract

Abstract This study evaluated the performance characteristics of binders and Stone Matrix Asphalt (SMA) Mixtures modified by Poly Phosphoric Acid (PPA), Carbon Nano Tube (CNT), and Styrene Butadiene Rubber (SBR). In order to investigate the rheological behavior of bitumens, linear Amplitude Sweep (LAS), rotational viscosity, Dynamic Shear Rheometer, Bending Beam Rheometer, Multiple Stress Creep Recovery (MSCR), and storage stability tests were implemented. Moreover, Resilient modulus (Mr), Indirect tensile strength (ITS), dynamic creep, wheel track, and Four-Point Beam Fatigue (FPBF) tests were performed to investigate the properties of asphalt mixtures. LAS and MSCR tests result revealed that the addition of SBR/PPA and CNT leads to improved fatigue life and rutting properties of binders at both strain levels. Additionally it was found that modification of SBR/PPA with 85–100 binder enhances the intermediate temperature behavior of bitumens. The results indicate that the addition of SBR/PPA enhances the Mr, rutting properties, ITS, fracture energy, and fatigue performance of specimens. By increasing the CNT contents, the rutting behavior improves.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Polymer Nanocomposites and Properties · Infrastructure Maintenance and Monitoring

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. U.H. Bahia, I.D. Hanson, M. Zeng, H. Zhai, A.M. Khatri, M.R. Anderson, Characterization of Modified Asphalt Binders in Superpave Mix Design. National Cooperative Highway Research Program, No. NCHRP 459, 2001, p. 176p.
2. Use of the multiple stress creep recovery (MSCR) test to characterize the rutting potential of asphalt binders: a literature review
3. M. Anderson, J. D’Angelo, D. Walker, MSCR: a better tool for characterizing high temperature performance properties, Asphalt, 25(2) (2010) 15–16, 18, 21–23.
4. Why do we need to change G*/sin delta and how?
5. J.A. D’Angelo, R.N. Dongre, Practical use of multiple stress creep and recovery test: characterization of styrene–butadiene–styrene dispersion and other additives in polymer-modified asphalt binders, Transp. Res. Rec. J. Transp. Res. Board, (2126) (2009) 73–82.
6. Use of the MSCR test to characterize the asphalt binder properties relative to HMA rutting performance–a laboratory study10.1016/j.conbuildmat.2015.06.044 ↗
7. Comparison of the fatigue failure behaviour for asphalt binder using both cyclic and monotonic loading modes10.1016/j.conbuildmat.2017.06.144 ↗
8. Evaluation of an accelerated procedure for fatigue characterization of asphalt binders
9. Modification and validation of linear amplitude sweep test for binder fatigue specification10.3141/2207-13 ↗
10. Polymer modified asphalt binders10.1016/j.conbuildmat.2005.07.007 ↗
11. The research for high-performance SBR compound modified asphalt10.1016/j.conbuildmat.2009.10.003 ↗
12. Mohd Rasdan Ibrahim, Herda Yati Katman, Mohamed Rehan Karim, Suhana Koting, Nuha S. Mashaan, A review on the effect of crumb rubber addition to the rheology of crumb rubber modified bitumen, Adv. Mater. Sci. Eng. 2013 (2013), Article ID 415246, 8 pages. https://doi.org/10.1155/2013/41524610.1155/2013/415246 ↗
13. Davide Lo Presti, G. Airey, Tyre rubber-modified bitumens development: the effect of varying processing conditions, Road Mater. Pavement Design 14(4) (2013) 888–900.
14. Properties of the asphalts modified by typical recycled polyolefin
15. Asphalt/polyethylene blends: rheological properties, microstructure and viscosity modeling10.1016/j.conbuildmat.2013.03.064 ↗
16. Structure and properties of POE modified asphalt
17. Nanomaterials applied in asphalt modification: a review10.1016/j.jmst.2013.04.008 ↗
18. The impact of carbon nano-fiber modification on asphalt binder rheology10.1016/j.conbuildmat.2011.12.022 ↗
19. M. García-Morales, P. Partal, F.J. Navarro, C. Gallegos, Effect of waste polymer addition on the rheology of modified bitumen, Fuel 85 (7–8) (2006) 936–943, .10.1016/j.fuel.2005.09.015 ↗
20. M. García-Morales, P. Partal, F.J. Navarro, F. Martínez-Boza, C. Gallegos, N. González, et al., Viscous properties and microstructure of recycled EVA modified bitumen, Fuel 83 (1) (2004) 31–38, https://doi.org/10.1016/S0016- 2361(03)00217-5.
21. Effect of phenolic resin on the rheological, chemical, and aging properties of SBR-modified asphalt
22. Performance evaluation of fatigue resistance of asphalt mixtures modified by SBR/PP polymer blends and SBS10.1016/j.conbuildmat.2019.03.111 ↗
23. Influence of anti stripping agents on performance of binders and asphalt mixtures containing Crumb Rubber and Styrene-Butadiene-Rubber10.1016/j.conbuildmat.2020.119880 ↗
24. Investigation on performance of polyphosphoric acid (PPA)/SBR compound-modified asphalt mixture at high and low temperatures10.1080/14680629.2018.1447503 ↗
25. The effect of nano-CaCO3/styrene–butadiene rubber (SBR) on fundamental characteristic of hot mix asphalt10.1080/14680629.2018.1532924 ↗
26. Effect of multi-walled carbon nanotubes on the performance of styrene–butadiene–styrene copolymer modified asphalt10.1617/s11527-016-0890-9 ↗
27. Low temperature performance of sasobit-modified warm-mix asphalt10.1061/(ASCE)MT.1943-5533.0000347 ↗
28. A. Epps Martin, et al., The effects of recycling agents on asphalt mixtures with high RAS and RAP binder ratios, National Cooperative Highway Research Program Phase I Interim Report, NCHRP 958 (2015).
29. One dimensional nanostructured materials10.1016/j.pmatsci.2006.08.001 ↗
30. Nanotechnology in concrete - a review10.1016/j.conbuildmat.2010.03.014 ↗
31. A review of advances of nanotechnology in asphalt mixtures10.1016/j.sbspro.2013.08.144 ↗
32. Rheological characterization of bituminous binders modified with carbon nanotubes10.1016/j.sbspro.2012.09.905 ↗
33. Characterization of CNTs- modified HMA’s mechanical properties10.1016/j.conbuildmat.2015.03.035 ↗
34. The effects of moisture susceptibility and ageing conditions on nano-silica/polymer-modified asphalt mixtures10.1016/j.conbuildmat.2014.09.014 ↗
35. Rheological characterization of bituminous binders modified with carbon nanotubes10.1016/j.sbspro.2012.09.905 ↗
36. E. Santagata, O. Baglieri, L. Tsantilis, G. Chiappinelli, Effects of nano-sized additives on the high-temperature properties of bituminous binders: a comparative study, (2013) 297–309. doi: 10.1007/978-94-007-6878-9_2210.1007/978-94-007-6878-9_22 ↗
37. Evaluation of different conditions on the mixing bitumen and carbon nano-tubes
38. Fatigue properties of bituminous binders reinforced with carbon nanotubes10.1080/10298436.2014.923099 ↗
39. I. Amin, S. El-Badawy, T. Breakah, M. Ibrahim, Laboratory evaluation of bitumen binder modified with carbon nanotubes for Egyptian climate, Constr. Build. Mater. 121 (2016) 361–372. [CrossRef]10.1016/j.conbuildmat.2016.05.168 ↗
40. Carbon nanotubes-modified bitumen binder: preparation and characterization
41. Electrochemical behaviors of functionalized carbon nanotubes in LiPF6/EC+DMC Electrolyte10.1016/S1452-3981(23)19466-1 ↗
42. Investigation of fatigue and fracture properties of asphalt mixtures modified with carbon nanotubes10.1111/ffe.12408 ↗
43. Fatigue properties of bituminous binders reinforced with carbon nanotubes10.1080/10298436.2014.923099 ↗
44. Effect of sonication on high temperature properties of bituminous binders reinforced with nano-additives10.1016/j.conbuildmat.2014.11.021 ↗
45. Fatigue and healing properties of nano-reinforced bituminous binders10.1016/j.ijfatigue.2015.05.008 ↗
46. Designing stone matrix asphalt mixtures for rut-resistant pavements
47. ASTM D36 / D36M-14, Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus), ASTM International, West Conshohocken, PA, 2020.
48. ASTM D113-17, Standard Test Method for Ductility of Asphalt Materials, ASTM International, West Conshohocken, PA, 2017.
49. ASTM D5 / D5M-20, Standard Test Method for Penetration of Bituminous Materials, ASTM International, West Conshohocken, PA, 2020.
50. Laboratory evaluation of the effect of coal waste ash (CWA) and rice husk ash (RHA) on performance of asphalt mastics and Stone matrix asphalt (SMA) mixture10.1016/j.conbuildmat.2019.117557 ↗
51. Evaluation of fatigue behavior of hot mix asphalt mixtures prepared by bentonite modified bitumen10.1016/j.conbuildmat.2014.06.066 ↗
52. ASTM D5892-96a, Standard Specification for Type IV Polymer-Modified Asphalt Cement for Use in Pavement Construction, ASTM International, West Conshohocken, PA, 2000,
53. Aashto · 2012
54. AASHTO TP101, Estimating Damage Tolerance of Asphalt Binders Using the Linear Amplitude Sweep. Recuperado el, (2014) 12.
55. Permanent deformation performance of binders and stone mastic asphalt mixtures modified by SBS/montmorillonite nanocomposite10.1016/j.conbuildmat.2019.117700 ↗
56. ASTM D6931-17, Standard Test Method for Indirect Tensile (IDT) Strength of Asphalt Mixtures, ASTM International, West Conshohocken, PA, 2017,
57. Evaluation of fatigue and rutting behavior of asphalt binder containing warm additive10.1080/10916466.2015.1084320 ↗
58. Ziari Hassan, Divandari Hassan, Babagoli Rezvan, Akbari Ali, Influence of bentonite additive on bitumen and asphalt mixture properties, World Acad. Sci. Eng. Technol. 6 (2012).
59. ASTM D4123-82, Standard Test Method for Indirect Tension Test for Resilient Modulus of Bituminous Mixtures (Withdrawn 2003), ASTM International, West Conshohocken, PA, 1995,
60. M.W. Witczak, Specification criteria for simple performance tests for rutting. NCHRP Report 580, Project 9–19. Wood, L. E., White, T. D., and Nelson, T. B. (1988).Current practice of cold in-place recycling of asphalt pavements. Trans. Res. Record 1178.
61. American Association of State Highway and Transportation Officials, T. (2008). 324 Standard method of test for Hamburg wheel-track testing of compacted hot-mix asphalt (HMA). Washington, DC, Author.
62. Standard Method of Test for Determining the Fatigue Life of Compacted Hot Mix Asphalt (HMA) Subjected to Repeated Flexural Bending, AASHTO T 321-07 (Superseded), Washington, DC, American Association of State Highway and Transportation Officials, 2007.
63. High-and intermediate-temperature performance of asphalt binder containing carbon nanotube using different rheological approaches10.1061/(ASCE)MT.1943-5533.0002106 ↗