Eco-friendly mix for Roller-Compacted Concrete: Effects of Persian-Gulf-Dredged marine sand on durability and resistance parameters of concrete
Source abstract
Abstract
Dredged marine sediment (DMS) is a by-product obtained from harbours and dry dock stations harmful to the environment and marine structures. In this study, the effects of replacing sands obtained from quarries with different percentages of DMS (15%, 25%, 35%, 50%, and 100%) dredged from the Persian Gulf on the properties of a roller-compacted concrete pavement (RCCP) were investigated. Three types of Portland cement, i.e. Type II, Type V, and special Portland pozzolanic cement (PC2, PC5, and SPPC) were utilised, along with ground-granulated blast-furnace slag (GGBS_15%) and fibre-reinforced polymer (FRP_1.25%), to improve the resistance and durability properties of RCCP. Compressive strength (CS), special electrical resistance (ER), water absorption (WA), water permeability under pressure, sulphate attack and scanning electron microscopy (SEM) tests were performed after curing the concrete specimens. The maximum CS, and ER, and the minimum water penetration, WA, and weight loss (WL) of concrete in a 5% sodium sulphate solution, were observed for 15% DMS replacement in PC5. Additionally, the maximum sulphate resistance for 25% DMS and 15% GGBS contents was observed in SPPC after one year.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Materials Engineering and Processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (77)
Show source-provided references
1. Use of waste materials in concrete: A review
2. Laboratory comparison of roller-compacted concrete and ordinary vibrated concrete for pavement structures
3. H.E. Fardin, A.G. dos Santos, “Roller compacted concrete with recycled concrete aggregate for paving bases,” Sustain., vol. 12, no. 8, 2020, DOI: 10.3390/SU12083154.10.3390/su12083154 ↗
4. Utilisation of industrial and agricultural wastes for productions of sustainable roller compacted concrete pavement mixes containing reclaimed asphalt pavement aggregates10.1016/j.resconrec.2019.104504 ↗
5. D. Harrington, F. Abdo, W. Adaska, C. Hazaree, “Guide for Roller-Compacted Concrete Pavements,” Inst. Transp. Iowa state university, no. August, p. 104, 2010, [Online]. Available: http://trid.trb.org/view.aspx?id=1082276.
6. Abrasion resistance and mechanical properties of Roller Compacted Concrete with GGBS10.1016/j.conbuildmat.2016.04.004 ↗
7. Properties of concrete manufactured using steel slag10.1016/j.proeng.2014.12.229 ↗
8. Feasibility of roller compacted concrete pavement containing different fractions of reclaimed asphalt pavement10.1016/j.conbuildmat.2018.12.047 ↗
9. Mechanical and durability properties of concrete made with dredged marine sand10.1016/j.conbuildmat.2011.04.053 ↗
10. Reuse of Tunisian marine sediments in paving blocks: factory scale experiment10.1016/j.jclepro.2015.04.138 ↗
11. Investigation of hydraulic activity of ground granulated blast furnace slag in concrete10.1016/S0008-8846(03)00062-0 ↗
12. The effect of BOFS and GGBFS on the mechanical properties of RCCP10.1080/14680629.2017.1396237 ↗
13. Monitoring electrical resistance of concretes containing alternative cementitious materials to assess their resistance to chloride penetration10.1016/S0958-9465(01)00075-0 ↗
14. E. Güneyisi, M. Gesog, “Properties of self-compacting concrete made with binary, ternary, and quaternary cementitious blends of fly ash, blast furnace slag, and silica fume,” vol. 23, pp. 1847–1854, 2009, DOI: 10.1016/j.conbuildmat.2008.09.015.10.1016/j.conbuildmat.2008.09.015 ↗
15. Bonding in cementitious materials with asphalt-coated particles: Part I-The interfacial transition zone10.1016/j.conbuildmat.2016.10.019 ↗
16. Fatigue resistance and cracking mechanism of concrete pavements reinforced with recycled steel fibres recovered from post-consumer tyres10.1016/j.engstruct.2012.06.030 ↗
17. Proportioning of steel fibre reinforced concrete mixes for pavement construction and their impact on environment and cost10.3390/su3070965 ↗
18. Evaluating plastic shrinkage and permeability of polypropylene fibre reinforced concrete10.1016/j.ijsbe.2016.05.007 ↗
19. H. Cement and A. Apparatus, “ASTM C 150,” pp. 1–8, 2008.
20. ASTM, “Standard test method for total evaporable moisture content of aggregate by drying.” 2013.
21. Introducing single particle loading apparatus and repeatability of the results
22. A. C494, “Standard Specification for Chemical Admixtures for Concrete 1,” pp. 1–10, 2007.
23. ASTM, “Standard specification for mixing water used in the production of hydraulic cement concrete,” 2012.
24. A. C1170, “Standard Test Methods for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table 1,” vol. 91, no. 8, pp. 1–5, 1998.
25. ACI 211, “Guide for Selecting Proportions for No-Slump Concrete Reported by ACI Committee 211,” Am. Concr. Inst., vol. 02, no. Reapproved, pp. 1–26, 2002.
26. J. No.354, “Guide for design and placement of roller concrete for the pavement of roads in Iran. Deputy to strategic monitoring. Execution system office. Tehran.,” 2009.
27. Effect of mixing and curing temperature on concrete strength
28. The effects of low temperature curing on the compressive strength of ordinary and high-performance concrete10.1016/j.conbuildmat.2004.04.033 ↗
29. Effect of temperature on the pore solution, microstructure and hydration products of Portland cement pastes10.1016/j.cemconres.2006.11.016 ↗
30. A method for the design of high strength concrete composition considering curing temperature and duration10.1016/j.conbuildmat.2018.08.014 ↗
31. ASTM D1557, “Standard Test Methods for Laboratory Compaction Characteristics of Soil Using,” ASTM D1557, vol. 3, pp. 1–10, 2003, DOI: 10.1520/D1557-12.1.
32. BS 1881-116: “Testing concrete — compressive strength of concrete cubes,” Br. Stand. Inst., no. 1, 1983.
33. P. Mehta, Kumar, Monteiro, Concrete: microstructure, properties, and materials. McGraw-Hill Publishing, 2006.
34. F. M. FDOT, “FM 5-578: Florida method of test for concrete resistivity as an electrical indicator of its permeability,” Florida Dep. Transp., 2004.
35. ACI Committee 222, “Protection of Metals in Concrete Against Corrosion,” Aci 222R-01, pp. 1–41, 2001.
36. Broomfield · 2003
37. Numerical modelling of the effects of rebar presence and/or multilayered concrete resistivity on the apparent resistivity measured via the Wenner method10.1016/j.conbuildmat.2013.06.053 ↗
38. Water sorptivity of mortars and concretes: a review10.1680/macr.1989.41.147.51 ↗
39. O. Mass, S. Mass, A. Immersion, S. Mass, A. Boiling, I.A. Mass, “No_0547.pdf,” pp. 11–13, 2008.
40. B. S. EN, “12390-8,” Depth of penetration of water under pressure,” Br. Stand. Inst., 2000.
41. E. Corro-, “Standard Guide for,” Annu. B. ASTM Stand., vol. 00, no. Reapproved, pp. 1–5, 2006, DOI: 10.1520/C1723-16.can.
42. High-strength concrete with different fine aggregate10.1016/S0008-8846(02)00860-8 ↗
43. Dredged marine sand as construction material10.1080/19648189.2012.676376 ↗
44. Resistance of fly ash-based geopolymer mortars in sulfuric acid
45. A. M. Neville and J. J. Brooks, “Concrete technology. Malaysia.” Pearson Education Asia Pte Ltd, PP (CTP), 2008.
46. Experimental study on the sulfate resistance of concrete blended ground granulated blast-furnace slag for recycling10.1080/12269328.2002.10541189 ↗
47. The effect of particle size distribution on the properties of blended cement incorporating GGBFS and natural pozzolan (NP)10.1016/j.powtec.2007.03.033 ↗
48. Properties of polypropylene fibre reinforced concrete using recycled aggregates10.1016/j.conbuildmat.2015.08.133 ↗
49. H. Bolat, O. \cSim\csek, M. Çullu, G. Durmu\cs, Ö. Can, “The effects of macro synthetic fibre reinforcement use on physical and mechanical properties of concrete,” Compos. Part B, Eng., vol. 61, pp. 191–198, 2014.10.1016/j.compositesb.2014.01.043 ↗
50. Effect of pozzolans on the performance of fiber-reinforced mortars10.1016/j.cemconcomp.2004.09.010 ↗
51. Effect of iron slag as partial replacement of fine aggregates on the durability characteristics of self-compacting concrete10.1016/j.conbuildmat.2016.10.074 ↗
52. The effect of nano-silica and polypropylene fibres on mechanical properties and durability of normal and lightweight concretes
53. Electrical resistivity of concrete–a literature review, report serial No. 2457, Portland Cement Association. 7-Alexander, MG and Magee BJ ‘Durability performance of concrete containing condensed silica fume.’
54. K. Newman, “Aspects of workability, strength, shrinkage and creep, sea dredged aggregates for concrete,” 1968.
55. B.W. Shacklock, “Durability of concrete made with sea-dredged aggregate,” 1968.
56. Evaluating the effect of macro-synthetic fibre on the mechanical properties of roller-compacted concrete pavement using response surface methodology10.1016/j.conbuildmat.2017.11.002 ↗
57. A.A. Ramezanianpour, “Cement replacement materials,” Springer, Berlin. DOI, vol. 10, pp. 973–978, 2014.10.1007/978-3-642-36721-2 ↗
58. The mechanical and durability properties of concrete containing hybrid synthetic fibres10.1016/j.conbuildmat.2018.05.145 ↗
59. Effects of PSD and surface morphology of micro-aggregates on admixture requirement and mechanical performance of micro-concrete10.1016/j.cemconcomp.2006.12.008 ↗
60. Effect of ground granulated blast furnace slag (GGBFS) on RCCP durability10.1016/j.conbuildmat.2017.03.019 ↗
61. Improving the properties of cement–fly ash grout using fibre and superplasticiser10.1016/S0008-8846(01)00527-0 ↗
62. T.B. Aulia, “Effects of polypropylene fibres on the properties of high-strength concretes,” Institutes Massivbau Baustoffechnologi, Univ. Leipzig, Lacer, vol. 7, 2002.
63. The durability properties of polypropylene fibre reinforced fly ash concrete10.1016/j.matdes.2010.07.011 ↗
64. V. Sata, A. Sathonsaowaphak, P. Chindaprasirt, “Cement & Concrete Composites Resistance of lignite bottom ash geopolymer mortar to sulfate and sulfuric acid attack,” vol. 34, pp. 700–708, 2012, DOI: 10.1016/j.cemconcomp.2012.01.010.10.1016/j.cemconcomp.2012.01.010 ↗
65. Compressive strength and sulfate resistance properties of concretes containing Class F and Class C fly ashes10.1016/j.conbuildmat.2012.02.023 ↗
66. Resistance to acid attack, abrasion and leaching behaviour of alkali-activated mine waste binders10.1617/s11527-010-9643-3 ↗
67. Resistance of geopolymer materials to acid attack10.1016/j.cemconres.2004.06.005 ↗
68. Study of the material properties of fly ash added to oyster cement mortar10.1016/j.conbuildmat.2012.11.021 ↗
69. Enhanced durability performance of fly ash concrete for concrete-faced rockfill dam application10.1016/S0008-8846(01)00623-8 ↗
70. Mix proportion and properties of fire-resistant wet-mixed high-strength polypropylene fibre-reinforced sprayed polymer cement composites10.1016/j.compstruct.2009.09.022 ↗
71. A.L.I. Sadrmomtazi, B. Tahmouresi, “Assessment of aggregates-cement paste border in concretes containing silica fume and fly ash,” 2018.
72. Permeability reduction in previous concrete due to clogging: experiments and modelling10.1061/(ASCE)MT.1943-5533.0000079 ↗
73. F.W. Locher, Cement: principles of production and use. Verlag Bau+ Technik, 2013.
74. Microstructural characteristics, porosity and strength development in ceramic-lateralised concrete10.1016/j.cemconcomp.2017.11.017 ↗
75. Freeze-thaw durability of recycled concrete containing ceramic aggregate10.1016/j.jclepro.2012.08.042 ↗
76. Strength and impact resistance properties of concrete containing fine bone china ceramic aggregate10.1016/j.conbuildmat.2018.02.213 ↗
77. A.S.A.C. Hazaree, “Roller Compacted Concrete Pavements: A Sustainable Alternative,” in Green Building with Concrete, CRC Press, 2011, pp. 144–165.