journal article·2017-10

Factors influencing bugholes on concrete surface analyzed by image processing technology

Baoju Liu, Tengyu Yang, Youjun Xie

Publisher page

Abstract

Abstract Bugholes are surface voids that result from the migration of entrapped air to the fresh concrete-formwork interface. The influencing factors, such as mix proportions and construction technology, on surface bugholes are quantitatively analyzed by image processing technology in this paper. The results show that the bughole area ratio of concrete and the maximum diameter of bugholes can be reduced by the methods of controlling the W/C ratio, superplasticizer content, sand ratio and fly ash content. Compared with saponifiable oil, the template paint can effectively reduce the maximum diameter and the area ratio of bugholes. Compared with wood formwork, the concrete surface using steel formwork and PVC formwork have higher amount of small bugholes and lower bughole area ratio, but the influence of formwork on the maximum diameter of bugholes on concrete surface is not significant. The concretes with different slump, mold release agents and formworks need different vibration time in order to decrease the bugholes on concrete surface, although long time vibration can reduce the surface bugholes, but the surface bugholes are difficult to be completely eliminated.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovations in Concrete and Construction Materials · Innovative concrete reinforcement materials · Erosion and Abrasive Machining

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Design and optimization of an instrument for measuring bughole rating of concrete surfaces10.1016/j.jfranklin.2010.04.004 ↗
2. Voids in concrete surfaces
3. Blowholes in concrete surfaces
4. A review of the concrete consolidation by vibration
5. The bughole problem
6. Influence of rheology on the quality of surface finish of cement-based mortars10.1016/j.conbuildmat.2015.03.111 ↗
7. Study on effects of air-entraining and anti-foaming on performance and apparent morphology of fair-faced concrete
8. Influence of the type of release oil on steel formwork corrosion and facing aesthetics10.1016/j.conbuildmat.2014.06.065 ↗
9. The effects of permeable formwork on the surface properties of concrete10.1680/macr.1991.43.155.93 ↗
10. Evaluation of the effect of concrete compositional changes and the use of ethyl-alcohol and biodegradable-oil-based release agents on the final surface appearance of self-compacting concrete precast elements10.1016/j.conbuildmat.2013.10.102 ↗
11. Study on the controlling of surface bugholes of concrete member
12. Multi-scale metrology of concrete surface morphology: fundamentals and specificity10.1016/j.conbuildmat.2016.03.099 ↗
13. Expert system applied for classifying self-compacting concrete surface finish10.1016/j.advengsoft.2013.04.005 ↗
14. Evaluating concrete surfaces using an image analysis process10.1016/j.conbuildmat.2005.01.025 ↗
15. Image analysis for detection of bugholes on concrete surface10.1016/j.conbuildmat.2017.01.098 ↗
16. GB175-2007, Common Portland cement, The State Standards of People’s Republic of China, 2007 (in Chinese).
17. GB8076-2008, Concrete admixtures, The State Standards of People’s Republic of China, 2008 (in Chinese).
18. Rheology as a tool in concrete science: The use of rheographs and workability boxes10.1016/j.cemconres.2011.01.009 ↗
19. The influence of mineral admixtures on the rheology of cement paste and concrete10.1016/S0008-8846(00)00454-3 ↗
20. Towards a prediction of superplasticized concrete rheology10.1007/BF02481674 ↗
21. Multi scale experimental study of concrete rheology: from water scale to gravel scale10.1617/s11527-005-9047-y ↗
22. From ordinary rhelogy concrete to self compacting concrete: a transition between frictional and hydrodynamic interactions10.1016/j.cemconres.2008.03.011 ↗
23. Influence of particle size distributions on yield stress and viscosity of cement–fly ash pastes10.1016/j.cemconres.2011.11.006 ↗
24. Effect of a superplasticizer on the properties of the concrete/oil/ formwork interface10.1016/j.conbuildmat.2013.05.029 ↗
25. Laboratory and field performance of biodegradable release agents for hydraulic concrete10.1617/s11527-015-0681-8 ↗
26. Correlation between adhesion energy of release agents on the formwork and demoulding performances10.1016/j.conbuildmat.2014.11.061 ↗
27. Air-void stability in self-consolidating concrete