The influence of clay composition and lithology on the industrial potential of earthenware
Source abstract
Abstract
Abstract This paper investigates the influence of clay composition and lithology on the industrial potential of earthenware. The 26 ceramic pastes collected were subjected to particle-size analysis, X-ray diffraction and X-ray fluorescence to investigate their compositions. The shards properties were determined through porosity tests, shrinkage, flexural and compressive strengths. Based on obtained results, all studied ceramic pastes turn out to offer a great potentiality for the earthenware industry despite their varied lithology. Argillite-based pastes exhibit the highest mechanical strengths while colluvium and schist-based pastes exhibit the lowest mechanical strengths. Further, the results have established a reference database for the perpetual restoration work of Marrakech monuments and can help to tracing back the source areas of the archaeological materials of this city.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Building materials and conservation · Recycling and utilization of industrial and municipal waste in materials production · Cultural Heritage Materials Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Murray · 2007
2. The application of clay minerals in ceramics10.1016/0169-1317(91)90016-3 ↗
3. Daoudi · 1996
4. El Boudour El Idrissi · 2017
5. Microstructural characterisation and physical properties of cured thermally activated clay-lime blends10.1016/j.conbuildmat.2011.06.014 ↗
6. Characteristics and ceramic properties of clayey materials from Amezmiz region (Western High Atlas, Morocco)10.1016/j.clay.2014.09.029 ↗
7. Suitability of soils and river deposits from Marrakech for the manufacturing of earthenware10.1016/j.clay.2016.05.013 ↗
8. Flaws linked to lime in pottery of Marrakech (Morocco)
9. A calcareous clay from Tamesloht (Al Haouz, Morocco): Properties and thermal transformations10.1016/j.clay.2011.01.018 ↗
10. The Saadian sugar refinery of Chichaoua (Morocco): constructive and structural investigations for conservation
11. The particular “rammed earth” of the Saadian sugar refinery of Chichaoua (XVIth century, Morocco): mineralogical, chemical and mechanical characteristics10.1007/s12665-011-1214-6 ↗
12. Decorated ceramic tiles used in catalan modernist architecture (c.1870 to c.1925): composition, decay and conservation10.1016/j.conbuildmat.2013.10.083 ↗
13. Sinan · 2000
14. A. Michard, O. Saddiqi, A. Chalouan, D.F. De Lamotte, Continental Evolution: The Geology of Morocco, 2008.10.1007/978-3-540-77076-3 ↗
15. Heimann · 2014
16. Moore · 1997
17. H.E. Cook, P.D. Johnson, J.C. Matti, I. Zemmels, IV. Methods of Sample Preparation, and X-ray Diffraction Data Analysis, X-ray Mineralogy Laboratory, Deep Sea Drilling Project, University of California, Riverside, Initial Reports Deep Sea Drill. Proj. 25, 1975, pp. 999–1007.10.2973/dsdp.proc.28.app4.1975 ↗
18. Factors governing abundance of hydrolyzable amino acids in the sediments from the N.W. European Continental Margin (47–50°N)10.1016/S0079-6611(98)00032-9 ↗
19. Late Quaternary clay mineral record in Central Lake Baikal (Academician Ridge, Siberia)10.1016/S0031-0182(02)00633-8 ↗
20. XRF major and trace element determination in Fe–Ti oxide minerals
21. Loss on ignition as a method for estimating organic and carbonate content in sediments: reproducibility and comparability of results10.1023/A:1008119611481 ↗
22. Porous solids and their characterization10.1002/crat.2170290702 ↗
23. R.D. Holtz, W.D. Kovacs, An Introduction to Geotechnical Engineering, 1981, 747.
24. Grain size distribution and interpretation
25. R. Selley, Elements of Petroleum Geology, 1998.
26. Mineralogy and plasticity in clay sediments from north-east Tunisia10.1016/j.jafrearsci.2009.07.007 ↗
27. Role of the texture of fibrous clay minerals in the plasticity behavior of host materials (Plateau du Kik, Western High Atlas, Morocco)10.1016/j.clay.2015.10.006 ↗
28. M. Jordán, T. Sanfeliu, C. de la Fuente, Firing transformations of Tertiary clays used in the manufacturing of ceramic tile bodies, 2001, doi:10.1016/S0169-1317(00)00044-2.10.1016/S0169-1317(00)00044-2 ↗
29. Firing transformations of cretaceous clays used in the manufacturing of ceramic tiles10.1016/S0169-1317(98)00052-0 ↗
30. Dependence of ceramics physical–mechanical properties on chemical and mineralogical composition10.1016/j.conbuildmat.2010.12.047 ↗
31. Modified mineral phases during clay ceramic firing10.1346/CCMN.2015.0630506 ↗
32. The colours of Ca-rich ceramic pastes: origin and characterization10.1016/S0169-1317(98)00024-6 ↗
33. M. Kornmann, Clay Bricks and Rooftiles, Manufacturing and Properties, Société de l’industrie minérale, 2007.
34. Mineralogy and physico-chemical properties of alluvial clays from Sanaga valley (Center, Cameroon): Suitability for ceramic application10.1016/j.clay.2013.08.038 ↗
35. Densification behaviour of a red firing Brazilian kaolinitic clay10.1016/j.ceramint.2004.08.010 ↗
36. The impact of the particle shape of organic additives on the anisotropy of a clay ceramic and its thermal and mechanical properties10.1016/j.conbuildmat.2016.08.094 ↗
37. J. Atkin, Les secrets de l’artisan potier, Marabout, 2015.
38. Composition and ceramic properties of tertiary clays from southern Sardinia (Italy)10.1016/S0169-1317(97)00010-0 ↗
39. Organic-tempered pottery: an experimental study
40. Development of sustainable construction material using industrial and agricultural solid waste: A review of waste-create bricks10.1016/j.conbuildmat.2011.04.038 ↗
41. Use of industrial ceramic sludge in brick production: effect on aesthetic quality and physical properties10.1016/j.conbuildmat.2016.07.096 ↗
42. Production of bricks from waste materials – a review10.1016/j.conbuildmat.2013.05.043 ↗
43. Use of granite sawing wastes in the production of ceramic bricks and tiles10.1016/j.jeurceramsoc.2004.04.020 ↗
44. H.G.F. Winkler, Bedeutung der Korngrössenverteilung und des Mineral-bestandes von Tonen für die Herstellung grobkeramischer Erzeugnisse. Ber. DKG, 31, 1954, pp. 337–343.
45. Mineralogical composition of the clay bodies used in the Italian tile industry10.1016/0169-1317(89)90023-9 ↗
46. Chemical, mineralogical and ceramic properties of kaolinitic materials from the Tresnuraghes mining district (Western Sardinia, Italy)10.1016/S0169-1317(00)00042-9 ↗
47. M. Kornmann, Matériaux de terre cuite : Propriétés et produits, Tech. L’ingénieur. CB1,2009.10.51257/a-v1-c906 ↗