Flexural analysis of laminated solid wood beams with different shear connections
Source abstract
Abstract
The paper discusses the mechanical response of laminated solid wood beams with different shear connections. Experimental, analytical (gamma method) and numerical (finite element analysis) procedures were performed to estimate the effect of shear connections on the stiffness and the failure capacity of laminated solid wood beams. The 4-point bending tests were carried out on the simply supported laminated wood beams with rigid adhesive bonding, on laminated wood beams with elastomeric adhesive bonding, on screw-laminated beams (with vertical and inclined screws) and laminated beams without bonding. The results obtained from the experimental tests, and the analytical and the numerical test calculations were analysed and compared. These results show that the flexural stiffnesses of inclined screw-laminated wood beams and of laminated beams with elastomeric adhesive bonding are similar. Both stiffnesses are up to twice the amount of that of vertical screw-laminated wood beams. However, the stiffness of the laminated beams with rigid adhesive is even fifty per cent higher than that of the previously mentioned two similar stiffnesses.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Wood Treatment and Properties · Natural Fiber Reinforced Composites · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Feasibility of glued laminated timber beams with tropical hardwoods10.1007/s00107-013-0721-4 ↗
2. Effects of wood-surface roughness, adhesive viscosity and processing pressure on adhesion strength of protein adhesive10.1163/156856106777657779 ↗
3. Delaminierung seigenschaften und scherfestigkeiten von verklebten rotkernigen buchenholz-lamellen10.1007/s00107-006-0135-7 ↗
4. Untersuchungen zum Einflußder Keilzinkengeometrie auf die Zugfestigkeit keilgezinkter Brettschichtholz-Lamellen10.1007/PL00002612 ↗
5. Evaluating the strength of finger jointed lumbers of Gmelina Arborea in Costa Rica10.1023/B:NEFO.0000040962.66091.db ↗
6. A review of surface and interfacial adhesion in wood science and related fields10.1007/BF00351806 ↗
7. Wake · 1976
8. Shear behaviour of bond lines in glued laminated timber beams at high temperatures10.1007/s00226-004-0223-y ↗
9. Elastic properties of adhesive polymers. II. Polymer films and bond lines by means of nanoindentation10.1002/app.24427 ↗
10. Effect of physicochemical properties and gluing methods on the qualities laminated wood made from fast-growing species, 9. Studies on the fabrication of end-to-end grain joint laminated wood from Taiwan acacia, sweet gum and Taiwania
11. Nonlinear analysis of multilayered horizontally nail-laminated wood beams
12. EN 912, Timber Fasteners – Specifications for Connectors for Timber, 2011.
13. EN 13271, Timber Fasteners – Characteristic Load-carrying Capacities and Slip-moduli for Connector Joints, 2001.
14. Mechanical properties of adhesives for bonding wood – a review10.1016/j.ijadhadh.2013.03.013 ↗
15. Adhesively bonded connections in the context of timber engineering – a review10.1080/00218464.2015.1071255 ↗
16. The behavior of horizontally glued laminated beams using rubber wood10.1016/j.conbuildmat.2014.01.032 ↗
17. Structural performance of glued laminated bamboo beams10.1061/(ASCE)ST.1943-541X.0000807 ↗
18. Screws with continuous threads in timber connections, Joints timber struct
19. Joints with inclined screws
20. Verbindungen mit geneigt angeordneten Schrauben
21. Theoretical and experimental analysis of timber-to-timber joints connected with inclined screws10.1016/j.conbuildmat.2010.03.007 ↗
22. Refurbishment of a traditional timber floor with a reversible technique: importance of the investigation campaign for design and control of the intervention10.1080/15583058.2012.670364 ↗
23. Giongo · 2012
24. Evaluation of bending tests on composite glulam-CLT beams connected with double-sided punched metal plates and inclined screws10.1016/j.conbuildmat.2015.07.137 ↗
25. Tests on glulam-CLT shear connections with double-sided punched metal plate fasteners and inclined screws10.1016/j.conbuildmat.2014.08.095 ↗
26. Self-tapping screws and threaded rods as reinforcement for structural timber elements – a state-of-the-art report10.1016/j.conbuildmat.2015.04.028 ↗
27. EN 408 · 2012
28. EN 384 · 2016
29. EN ISO 527-1 · 2012
30. EN ISO 527-2 · 2012
31. ASTM D906-98 · 1998
32. EN 1995-1:2004+A2:2014 · 2014
33. SolidWorks Corporation, SolidWorks Fundamentals, 2013.