Experimental study of metal cushion pads for high speed railways
Source abstract
Abstract
The widespread use of railway concrete sleepers/slab track has led to the evolution of fastening systems towards the use of elastic rail pads. Pads are interposed between the rail and the sleeper as damping elements to minimize the transmission of shocks and vibrations to the sleeper, this function being of particular importance for high-speed railways. Polymeric materials have been extensively used to manufacture resilient rail pads. Plastics, however, suffer from a series of intrinsic limitations since the environmental agents (UV rays, temperature, air humidity, etc.) as well as the compressive fatigue loads they are subjected to, negatively affect their mechanical properties over time. This study proposes the use of a novel solution, the so-called ?metal cushion? pads, as a reliable alternative to polymer pads. Metal cushion pads are made of stainless steel wire, knitted, embossed and cold-pressed down into a mold to achieve the required shape and size. The thorough experimental scope carried out in this research includes the following tests: (i) static and dynamic stiffness, (ii) fatigue aging, (iii) electrical resistance and, (iv) corrosion resistance. The values of static and dynamic stiffness are very similar to those obtained with other traditional polymers such as EVA and TPE-M. In addition, it has been found that the stiffness of the metallic solution can be modified by changing the diameter and density of the wire. In the case of fatigue aging, the foremost wearing suffered by the metal cushion pads occurs mainly in the early cycling stages, although the total damage is comparable to that of the traditional solutions. The electrical resistance of the metal cushion does not fulfill the requirements demanded by the international standards; however, its behavior is satisfactory if the metallic solution is combined with a thin plastic sheet. Finally, the metal samples have passed the corrosion test in a saline environment without showing any signs of corrosion damage.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Railway Engineering and Dynamics · Mechanical stress and fatigue analysis · Structural Engineering and Vibration Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. The use of elastic elements in railway tracks: a state of the art review10.3390/ma7085903 ↗
2. E. Kim, S.C. Yang, S.Y. Jang, Investigation and prediction of stiffness increase of resilient rail pad due to train and environmental load in high-speed railway, in: 2015 Joint Rail Conference, 2015, p. V001T01A035.10.1115/JRC2015-5789 ↗
3. D. Álvarez, P. Luque, Ferrocarriles: ingeniería e infraestructura de los transportes, Oviedo, 2003.
4. La rigidez vertical de la vía y el deterioro de las líneas de alta velocidad
5. Railway track stiffness variations – consequences and countermeasures
6. High speed and track deterioration: the role of vertical stiffness of the track10.1243/095440904322804411 ↗
7. R. B, Dynamic response of elastic fastenings, Rail Int., 17(6), 29–36, 1986.
8. W.S. Günther Leykauf, Untersuchungen Und Erfahrungen Mit Besohlten Schwellen, EI – Der Eisenbahningenieur, 2004.
9. K. Giannakos, Influence of rail pad stiffness on track stressing, life-cycle and noise emission, in: Second Int. Conf. Sustain. Constr. Mater. Technol. June 28 - June 30, 2010, Univ. Politec. delle Marche, Ancona, Italy. Spec. Proc., no. Figure 2, 2010.
10. Sensitivity analysis of free vibration characteristics of an in situ railway concrete sleeper to variations of rail pad parameters10.1016/j.jsv.2006.05.034 ↗
11. S. Kaewunruen, A. M. Remennikov, Response and prediciton of dynamic characteristics of worn rail pads under static preloads, in: Proc. 14th Int. Congr. Sound Vib., 9–12, 2007.
12. Measurements of the dynamic railpad properties10.1016/j.jsv.2005.08.042 ↗
13. On the railway track dynamics with rail vibration absorber for noise reduction10.1016/j.jsv.2007.07.049 ↗
14. D. Thompson, Railway Noise and Vibration, 1st ed., 2008.10.1016/B978-0-08-045147-3.00003-7 ↗
15. Theoretical optimization of track components to reduce rolling noise10.1006/jsvi.1996.0255 ↗
16. The effects on railway rolling noise of wave reflections in the rail and support stiffening due to the presence of multiple wheels10.1016/S0003-682X(01)00003-2 ↗
17. An experimental evaluation of the attenuation effect of rail pad on flexural behaviour of railway concrete sleeper under severe impact loads
18. I.A. Carrascal Vaquero, Atenuación frente a impacto en sistemas de sujeción ferroviaria de alta velocidad.
19. Influence of the rail pad stiffness on the occurrence propensity of rail corrugation
20. Investigation of the influence of rail pad stiffness on rail corrugation on a transit system10.1016/j.wear.2005.10.004 ↗
21. I. A. Carrascal Vaquero, Optimization and analysis of the performance of clamping systems for Spanish high speed railways, 2006.
22. Natural rubber in civil engineering
23. T. Sawada, M. Watanabe, Investigation on the durability of test rail pads by the field and quality tests, Q. Rep. RTRI (railw. Tech. Res. Institute), 20(1), 1979.
24. S. Kaewunruen, Monitoring structural degradation of rail pads in laboratory using impact excitation technique, 2015, 389–394, 2005.
25. G.-S. F. Carrascal, I. Casado, J.A. Diego, S. Polanco, J.A. Efecto del envejecimiento de placas de asiento de carril inyectadas con TPE en la elasticidad de la vía para Alta Velocidad, 2010.
26. Dynamic behaviour of railway fastening setting pads10.1016/j.engfailanal.2006.02.003 ↗
27. Comportamiento dinámico de placas de asiento de sujeción de vía de ferrocarril
28. Dynamic behaviour of high-speed rail fastenings in the presence of desert sand10.1016/j.conbuildmat.2016.05.023 ↗
29. The use of deconstructed tire rail pads in railroad tracks: impact of pad thickness10.1016/j.matdes.2014.01.062 ↗
30. AEN/CTN 25 – APLICACIONES FERROVIARIAS, UNE-EN 13146-9:2011+A1:2012 – Aplicaciones ferroviarias. Vía. Métodos de ensayo de los sistemas de fijación. Parte 9: determinación de la rigidez, 2012.
31. AENOR, UNE-EN 13481-2. Railway applications. Track. Performance requirements for fastening systems. Part 2: fastenig systems for concrete sleepers, 2010.
32. AENOR, UNE-EN 13146-4. Railway applications. Track. Test methods for fastening systems. Part 4: effect of repeated loading, 2015.
33. AENOR, UNE-EN 13146-5 Railway applications. Track. Test methods for fastening systems - Part 5: determination of electrical resistance, 2012.
34. AENOR, UNE-EN ISO 9227. Corrosion tests in artificial atmospheres. Salt spray tests, 2012.
35. ADIF, ET 03.360.570.0 Placas elásticas de asiento para sujeción VM. 2005.
36. A. Perez, www.silentflex.com, 2015.
37. AENOR, UNE-EN 13146-6. Railway applications. Track. Test methods for fastening systems. Part 6: effect of severe environmental conditions, 2012.