Experimental study on the coupling effect of sulfate corrosion and loading on the mechanical behavior of steel and H-section beam
Source abstract
Abstract
Abstract Described herein is the coupling effect of corrosion and loading on mechanical properties of steel and H-section beam. Indoor sulfate accelerated corrosion over steel under stress state was carried out. The results indicate that nominal strength of corroded steel decreased with increasing corrosion rate, loading would result in higher corrosion rate. The load-displacement curve of corroded steel changed obviously, accompanied with the shortage or even absence of yield plateau and decreased curvature in softening stage. The bearing capacity of corroded beam was affected by both corrosion rate and loading ratio. The load of corroded beam decreased with increasing corrosion time or loading ratio when loading ratio or corrosion time kept unaltered, respectively. The load-displacement curve of corroded beam can be divided into elastic stage, yield hardening stage and load degradation stage. The established BP neural network model can predict ultimate bearing capacity of corroded beam under coupling effect of sulfate and loading.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Integrity and Reliability Analysis · Corrosion Behavior and Inhibition · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. In large scale corrosion tests
2. Corrosion-dependent ultimate strength assessment of aged box girders based on experimental results10.5957/jsr.2011.55.4.289 ↗
3. Effect of corrosion degradation on the ultimate strength of steel box girders10.1179/1743278212Y.0000000005 ↗
4. Tensile strength assessment of corroded small scale specimens10.1016/j.corsci.2014.04.031 ↗
5. Effect of pitting corrosion on local strength of hold frames of bulk carriers (1st report)10.1016/j.marstruc.2004.10.001 ↗
6. Effect of simulated pitting corrosion on the tensile properties of steel10.1016/j.conbuildmat.2016.11.037 ↗
7. Tensile behavior of naturally and artificially corroded steel bars10.1016/j.conbuildmat.2015.10.075 ↗
8. Remaining moment capacity of corroded steel beams10.1007/BF03215828 ↗
9. Shear failure behaviors of a web panel with local corrosion depending on web boundary conditions10.1016/j.tws.2013.07.018 ↗
10. Analytical demonstrations to assess residual bearing capacities of steel plate girder ends with stiffeners damaged by corrosion10.1080/15732479.2012.697904 ↗
11. Finite element investigation of shear capacity of locally corroded end panel of steel plate girder10.1007/s13296-013-4004-z ↗
12. Analytical study on shear capacity of steel I-girders with local corrosion nearby supports10.1016/j.proeng.2011.07.287 ↗
13. Compression strength of corroded steel angle members10.1016/j.jcsr.2010.05.006 ↗
14. Strength assessment of a severely corroded box girder subjected to bending moment10.1016/j.jcsr.2013.09.010 ↗
15. Assessment of the hull girder ultimate strength of a bulk carrier using nonlinear finite element analysis
16. Comparative study on the ultimate hull girder strength of large double hull tankers10.1016/j.marstruc.2005.11.002 ↗
17. Electorochemical study the corrosion behaviour of carbon steel in mortars under compressive and tensile stresses10.1016/j.corsci.2015.11.006 ↗
18. Corrosion behaviour of low-carbon bainitic steel under a constant elastic load10.1016/j.corsci.2010.06.021 ↗
19. ASTM E8/E8M-11 · 2011
20. Effect of deformation conditions on the corrosion behavior of the low alloy structural steel girders10.1016/j.matdes.2015.09.160 ↗
21. Experimental study on influence of corrosion on behavior of steel material and steel beams
22. Artificial neural networks and their application to assessment of ultimate strength of plates with pitting corrosion10.1016/j.oceaneng.2007.06.007 ↗
23. Training feed forward networks with the Marquardt algorithm10.1109/72.329697 ↗
24. Load-carrying capacity of locally corroded steel plate girder ends using artificial neural network10.1016/j.tws.2015.12.007 ↗