journal article·2018-11

Impact of Al(OH)3 addition to POFA on the compressive strength of POFA alkali-activated mortar

Babatunde Abiodun Salami, Megat Azmi Megat Johari, Zainal Arifin Ahmad, Mohammed Maslehuddin, Adeshina Adewale Adewumi

Publisher page

Abstract

Abstract The study reports the influence of Al(OH)3 as alumina source on the compressive strength of POFA alkali-activated mortar (POFA AAM). The synthesis of the developed POFA AAM stems from the mixture proportioning of Na2SiO3(aq), NaOH(aq), POFA and Al(OH)3. At the 28th day, after 65 °C heat and laboratory curing, the compressive strength of the POFA AAM were tested. It was observed that the compressive strength of all the POFA AAM specimens with Al(OH)3 addition were lower than those of the specimens without Al(OH)3 addition. The only exception was with the POFA AAM at 2% Al(OH)3 addition in all NaOH molarities. The compressive strength losses recorded in some POFA AAM were due to weak interfacial zones creation between the activated products and the zeolitic phases, which became more apparent at higher Al(OH)3 additions. The strength development of the POFA AAM microstructure was studied with the aid of SEM/EDS, XRD and FTIR.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Recycled Aggregate Concrete Performance

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Alkaline activation of metakaolin and calcium hydroxide mixtures: influence of temperature, activator concentration and solids ratio10.1016/S0167-577X(00)00212-3 ↗
2. Performance of blended metakaolin/blastfurnace slag alkali-activated mortars10.1016/j.cemconcomp.2016.04.008 ↗
3. Alkali-activated fly ash/slag cements: strength behaviour and hydration products10.1016/S0008-8846(00)00298-2 ↗
4. Pacheco-Torgal · 2014
5. Influence of initial curing on the properties of concrete containing limestone blended cement10.1016/S0008-8846(00)00217-9 ↗
6. P. Nath, P.K. Sarker, Fracture Properties Of Geopolymer Concrete Cured In Ambient Temperature, in: Research Publishing Services, 2013: pp. 1061–1066. doi:10.3850/978-981-07-5354-2_M-53-430.10.3850/978-981-07-5354-2_M-53-430 ↗
7. Effects of addition of Al(OH)3 on the strength of alkaline activated ground blast furnace slag-ultrafine palm oil fuel ash (AAGU) based binder10.1016/j.conbuildmat.2013.09.054 ↗
8. Compressive strength of treated palm oil fuel ash based geopolymer mortar containing calcium hydroxide, aluminum hydroxide and silica fume as mineral additives10.1016/j.cemconcomp.2015.02.007 ↗
9. Kinetics of geopolymerization: role of Al2O3 and SiO210.1016/j.cemconres.2007.01.003 ↗
10. Effect of SiO2 and Al2O3 on the setting and hardening of high calcium fly ash-based geopolymer systems10.1007/s10853-012-6353-y ↗
11. M. Ariffin, M. Azreen, M.W. Hussin, M.A. Rafique Bhutta, Mix design and compressive strength of geopolymer concrete containing blended ash from agro-industrial wastes, in: Trans Tech Publ, 2011: pp. 452–457.10.4028/www.scientific.net/AMR.339.452 ↗
12. Early Strength characteristics of palm oil fuel ash and metakaolin blended geopolymer mortar10.4028/www.scientific.net/AMR.690-693.1045 ↗
13. POFA-Engineered alkali-activated cementitious composite performance in acid environment10.3151/jact.15.684 ↗
14. ASTM C618, Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete, ASTM International, West Conshohocken, PA, 2015, 2012. http://www.astm.org/Standards/C618.htm (accessed December 17, 2014).
15. Impact of added water and superplasticizer on early compressive strength of selected mixtures of palm oil fuel ash-based engineered geopolymer composites10.1016/j.conbuildmat.2016.01.033 ↗
16. ASTM C1437-15 · 2015
17. Relationships between composition, structure and strength of inorganic polymers10.1007/s10853-005-2794-x ↗
18. Understanding the relationship between geopolymer composition, microstructure and mechanical properties10.1016/j.colsurfa.2005.06.060 ↗
19. L. Weng, K. Sagoe-Crentsil, T. Brown, Speciation and hydrolysis kinetics of aluminates in inorganic polymer systems, in: 2002.
20. Silicate complexes of aluminum(III) in aqueous systems10.1016/S0010-8545(01)00362-9 ↗
21. The effect of alkali and Si/Al ratio on the development of mechanical properties of metakaolin-based geopolymers10.1016/j.colsurfa.2006.05.044 ↗
22. Effect of Si/Al ratio on engineering properties of alkali-activated GGBS pastes10.1680/gmat.14.00001 ↗
23. The composition range of aluminosilicate geopolymers10.1016/j.jeurceramsoc.2004.06.001 ↗
24. The nature of C-S-H in hardened cements10.1016/S0008-8846(99)00168-4 ↗
25. Influence of granulated blast furnace slag on the reaction, structure and properties of fly ash based geopolymer10.1007/s10853-009-3934-5 ↗
26. Microstructural and strength evolutions of geopolymer composite reinforced by resin exposed to elevated temperature10.1016/j.jnoncrysol.2011.11.006 ↗
27. K.K.-P.E.N. Allouche, Impact of alkali silica reaction on fly ash-based geopolymer concrete, J. Mater. Civ. Eng. 25(1061)131–139. doi: 10.1061/(ASCE)MT.1943-5533.0000579.10.1061/(ASCE)MT.1943-5533.0000579 ↗
28. Mechanical performance and hydration mechanism of geopolymer composite reinforced by resin10.1016/j.msea.2010.06.069 ↗
29. J. Davidovits, Geopolymer chemistry and applications: Calcium based geopolymer, 2011.
30. Effects of aluminates on the formation of geopolymers10.1016/j.mseb.2004.11.008 ↗
31. G. Harvey, L.S. Dent Glasser, Structure and Properties of Aluminosilicate Solutions and Gels Zeolite Synthesis, 1989, in American Chemical Society, pp. 49–65 doi: 10.1021/bk-1989-0398.ch004.10.1021/bk-1989-0398.ch004 ↗
32. Properties of alkali activated silica fume–Al(OH)3–fluidized bed combustion fly ash composites10.1617/s11527-014-0413-5 ↗
33. NaOH-activated ground fly ash geopolymer cured at ambient temperature10.1016/j.fuel.2011.01.018 ↗
34. Environmental, physical and structural characterisation of geopolymer matrixes synthesised from coal (co-)combustion fly ashes10.1016/j.jhazmat.2007.10.008 ↗
35. Development of high volume rice husk ash alumino silicate composites10.1007/s12613-010-0370-0 ↗
36. A study on the hydration rate of natural zeolite blended cement pastes10.1016/S0950-0618(99)00048-3 ↗
37. Utilization of Alumina red mud for synthesis of inorganic polymeric materials10.1080/08827500802498199 ↗
38. Alkali activation of fly ash: effect of the SiO2/Na2O ratio10.1016/j.micromeso.2007.02.055 ↗
39. H.F.W. Taylor, Cement Chemistry, Thomas Telford, 1997. Available at: https://books.google.com.sa/books?id=1BOETtwi7mMC.
40. The role of Al in C-S–H: NMR XRD, and compositional results for precipitated samples10.1016/j.cemconres.2005.03.002 ↗
41. A new aluminium-hydrate species in hydrated Portland cements characterized by 27Al and 29Si MAS NMR spectroscopy10.1016/j.cemconres.2005.04.010 ↗
42. A model for the C-A-S-H gel formed in alkali-activated slag cements10.1016/j.jeurceramsoc.2011.04.036 ↗