Rheological characterization of high-modulus asphalt mix with modified asphalt binders
Source abstract
Abstract
Abstract Complex Modulus (E∗) or stiffness is a fundamental design parameter of flexible pavements which can be used to determine the response of asphalt mix under traffic loading and thermal conditions. The modulus value heavily depends on the temperature of the mix as well as the speed of loading. High-modulus asphalt mix, or Enrobe a Module Eleve (EME) in French, is a type of Hot Mix Asphalt (HMA) that has high stiffness at intermediate temperature. EME has several advantages over conventional asphalt mix including reduction in layer thickness and improved structural life. The purpose of this study is to evaluate rheological behavior of EME mixes fabricated with modified asphalt binders. In this study, two types of EME mixes based on nominal maximum aggregate size (NMAS) were developed (EME 12.5 and EME 19) using three different polymer modified asphalt binders (PG 58-28 plus Elastomer additives, modified PG 82-28 and PG 88-28). Complex modulus test was conducted at five different temperatures (−10, 4, 21, 37, 54 °C) and six loading frequencies (0.1, 0.5, 1, 5, 10 and 25 Hz). 2S2P1D rheological model was used to characterize the rheological properties of EME mixes. Environmental Scanning Electron Microscope (ESEM) was used to investigate the binders’ microstructures in terms of density, fibril size and structural network along with time required for fibril formation. The obtained results showed that there was a considerable difference between the rheological properties of the mixes, and that EME 19 with PG 88-28 performed more elastically. On the other hand, complex modulus of EME mixes with PG 58-28 + Elastomers had larger viscous component. In addition, a good correlation between EME rheological properties and microstructure of the modified binders was observed as explained in this paper.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. High modulus asphalt concrete with limestone aggregate
2. Manuel de conception des chaussées d'autoroutes, third ed., SCETAUROUTE Direction Technique, March 1994, (in French).
3. Catalogue des structures types de chaussées neuves de la Direction des routes, LCPC/SETRA, Sept. 1998, (in French).
4. Enrobés hydrocarbonés, Couches d'assises: Enrobés à module élevé. Norme française NF P 98-140, 1992, (in French).
5. A comparative high–modulus experiment in Belgium
6. Development and uses of hard-grade asphalt and of high-modulus asphalt mixes in France
7. Applications, properties and design of high modulus bituminous mixtures10.1080/14680629.2006.9690029 ↗
8. Les enrobés à module élevé “(High modulus bituminous mixtures)
9. EME2: the journey to Australia
10. Comparison of low-temperature cracks intensity on pavements with high modulus asphalt concrete and conventional asphalt concrete bases10.1016/j.conbuildmat.2017.04.179 ↗
11. Investigation of low-temperature cracking in newly constructed high-modulus asphalt concrete base course of a motorway pavement10.1080/14680629.2015.1029674 ↗
12. Experimental study on rheological characteristics and performance of high modulus asphalt binder with different modifiers10.1016/j.conbuildmat.2017.08.058 ↗
13. Improvement of high modulus asphalt mixtures with average quality aggregate and bitumen by application of polymeric additives10.1016/j.conbuildmat.2018.05.126 ↗
14. Performance investigation and sustainability evaluation of multiple-polymer asphalt mixtures in airfield pavement10.1016/j.jclepro.2018.03.208 ↗
15. Combined bituminous binder and mixture linear rheological properties10.1016/j.conbuildmat.2004.04.008 ↗
16. Stiffness testing for bituminous mixtures10.1007/BF02481553 ↗
17. Di Benedetto · 1998 · 137
18. NCHRP, APPENDIX II-1. Calibration of fatigue cracking modelsfor flexible pavements, National Cooperative Highway Research Program, 2004
19. Modeling of asphalt concrete
20. Thermo-mechanical Properties of Stone Mastic Asphalt (SMA)-Experimentation and Rheological Testing
21. Investigation of rheological properties of light colored synthetic asphalt binders containing different polymer modifiers10.1016/j.conbuildmat.2017.11.098 ↗
22. Observation of bitumen microstructure oxidation and blending with ESEM10.1080/14680629.2017.1304251 ↗
23. AASHTO R 30-02, “Standard practice for mixture conditioning of hot-mix asphalt (HMA),” Standard Specifications for Transportation Materials and Methods of Sampling and Testing, American Association of State and Highway Transportation Officials, 2015.
24. NF EN 13108-1, “Bituminous mixtures: material specifications: part 1: asphalt concrete”, 2007.
25. AASHTO T 342-11, “Standard Method of Test for Determining Dynamic Modulus of Hot Mix Asphalt (HMA),” Standard Specifications for Transportation Materials and Methods of Sampling and Testing, American Association of State Highway and Transportation Officials, 2011.
26. Linear viscoelastic behaviour of bituminous materials: from binders to mixes10.1080/14680629.2004.9689992 ↗
27. General “2S2P1D” model and relation between the linear viscoelastic behaviours of bituminous binders and mixes
28. G. Sayegh, “Variation des modules de quelques bitumes purs et enrobés bitumineux,” Faculté des Sciences de l'université de Paris, 1965, (in French).
29. Effect of colloidal structure of bituminous binder blends on linear viscoelastic behaviour of mixtures containing Reclaimed Asphalt Pavement10.1016/j.matdes.2016.07.124 ↗
30. Viscoelastic behaviour characterization of a gap-graded asphalt mixture with SBS polymer modified bitumen10.1590/1516-1439.332214 ↗
31. Alternate shift factor relationship for describing temperature dependency of viscoelastic behavior of asphalt materials10.3141/2207-16 ↗
32. Comparison of ESEM and physical properties of virgin and laboratory aged asphalt binders10.1016/j.fuel.2018.08.052 ↗
33. Application of the theory of viscoelasticity to evaluate the resilient modulus test in asphalt mixes10.1016/j.conbuildmat.2017.05.037 ↗
34. Effects of non-foaming WMA additives on asphalt binders at high performance temperatures10.1016/j.fuel.2011.09.017 ↗
35. Application of compressible packing model for optimization of asphalt concrete mix design10.1016/j.conbuildmat.2017.11.004 ↗