Influence of mechanical activation of fly ash in presence of polynaphthalene sulfonate superplasticizer on rheology and hydration kinetics of cement – fly ash pastes
Source abstract
Abstract
Abstract In this study fly ash was milled in three types of mills up to the same median particle size ∼6 µm. The milling was performed in presence of polynaphthalene sulfonate (PNS) superplasticizer and apart of it. It is shown that the introduction of PNS during the milling allows to prevent adverse agglomeration of the particles, while increment of the specific surface area is independent of the presence of PNS. Cement – fly ash pastes prepared with PNS introduced during the fly ash activation exhibit a reduction of the yield stress by 35%, plastic viscosity by 25% and the induction period of hydration by 30% in comparison to the paste prepared with PNS introduced with the mixing water.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Optimization of cement and fly ash particle sizes to produce sustainable concretes10.1016/j.cemconcomp.2011.04.008 ↗
2. Towards sustainable solutions for fly ash through mechanical activation10.1016/j.resconrec.2007.06.007 ↗
3. Grinding of Class-F fly ash using planetary ball mill: A simulation study to determine the breakage kinetics by direct- and back-calculation method
4. Influence of fly ash and its mean particle size on certain engineering properties of cement composite mortars10.1016/j.cemconres.2004.08.014 ↗
5. Mechanical activation of fly ash: Effect on reaction, structure and properties of resulting geopolymer10.1016/j.ceramint.2010.09.038 ↗
6. Influence of planetary ball milling parameters on the mechano-chemical activation of fly ash10.1016/j.powtec.2015.04.078 ↗
7. Investigation of thermally induced processes in corundum refractory concretes with addition of fly ash10.1007/s10973-014-4230-4 ↗
8. Balaz · 2008
9. Effect of grinding on early age performance of high volume fly ash ternary blended pastes with CKD & OPC10.1016/j.conbuildmat.2017.01.044 ↗
10. Mechano-chemical modification of cement with high volumes of blast furnace slag10.1016/j.cemconcomp.2005.03.010 ↗
11. Mechanochemistry: an overview10.1351/pac199971040581 ↗
12. Mechanochemistry of Solids: Past, Present, and Prospects10.1023/A:1011347706721 ↗
13. G. Intini, L. Liberti, M. Notarnicola, F.D.I. Canio, Mechanochemical Activation of Coal Fly Ash for Production of High Strength Cement Conglomerates, 17 (2009) 557–561.
14. Mechano-chemical activation of high-Ca fly ash by cement free blending and gypsum aided grinding10.1016/j.conbuildmat.2013.02.050 ↗
15. Cement additivesComprehensive understanding of Grinding aids
16. Impact of grinding aids on dry grinding performance, bulk properties and surface energy10.1016/j.apt.2017.11.029 ↗
17. Analysis of triethanolamine in cement pastes10.1016/0008-8846(77)90122-3 ↗
18. Quantitative determination of triethanolamine in cements10.1016/0008-8846(93)90011-W ↗
19. Preparation of polycarboxylate-based grinding aid and its influence on cement properties under laboratory condition10.1016/j.conbuildmat.2016.10.007 ↗
20. Mechanical treatment of fly ashes part II: Particle morphologies in ground fly ashes (GFA) and workability of GFA-cement mortars10.1016/0008-8846(95)00212-X ↗
21. Cement and superplasticizer combinations: compatibility and robustness10.1520/CCA12329 ↗
22. Effects of fineness of cement on polynaphthalene sulfonate based superplasticizer–cement interaction10.1016/j.conbuildmat.2008.10.004 ↗
23. Compatibility between superplasticizer admixtures and cements with mineral additions10.1016/j.conbuildmat.2011.12.092 ↗
24. Impact of Chemical Admixtures on Cement Hydration
25. Rheology and setting of high volume fly ash mixtures10.1016/j.cemconcomp.2010.01.008 ↗
26. Influence of plasticizers on the rheology and early heat of hydration of blended cements with high content of fly ash10.1016/j.cemconcomp.2015.10.005 ↗
27. A comparison of the specific surface area of fly ash measured by image analysis with conventional methods10.1016/j.conbuildmat.2018.09.131 ↗
28. In-situ carbonation of alkali activated fly ash geopolymer10.1016/j.conbuildmat.2014.06.012 ↗
29. Flatt · 2012 · 144
30. Polyelectrolyte effects on the rheological properties of concentrated cement suspensions10.1111/j.1151-2916.2000.tb01489.x ↗
31. Rheological behaviour of cement pastes with low amounts of polynaphthalene sulfonate plasticizer
32. Correlation between yield stress and slump: Comparison between numerical simulations and concrete rheometers results10.1617/s11527-005-9035-2 ↗
33. Relationship between the Bingham parameters and slump10.1016/j.cemconres.2006.03.001 ↗
34. H.F.W. Taylor, Cement Chemistry, second ed., Thomas Telford Publishing, 1997.10.1680/cc.25929 ↗
35. Mechanisms of cement hydration10.1016/j.cemconres.2010.09.011 ↗
36. Advances in understanding hydration of Portland cement10.1016/j.cemconres.2015.05.025 ↗
37. Effect of fineness and replacement ratio of ground fly ash on properties of blended cement mortar10.1016/j.conbuildmat.2018.05.060 ↗
38. Calorimetry, rheology and compressive strength of superplasticized cement pastes10.1016/0008-8846(93)90048-E ↗
39. Adsorption characteristics of superplasticizers on cement component minerals10.1016/S0008-8846(02)00782-2 ↗
40. Effect of sodium salt of naphthalene-formaldehyde polycondensate on ettringite formation10.1016/S0008-8846(99)00110-6 ↗