The physical and mechanical properties of chloride-based deicers at 0∼−30 °C
Source abstract
Abstract
Abstract Icing pressure testing was conducted to investigate the icing pressure (Ip) of chloride-based deicers and discuss the relation between Ip and the freeze-thaw deterioration of concrete induced by chloride deicers. During the icing pressure test, when the solution transformed from the liquid to the solid phase, undercooling occurred, and the heat of the liquid-solid phase transformation was released. The Ip of chloride deicers and water reached a plateau near −30 °C. The stable Ip value of water was the highest of that of the chloride solutions followed by that of 3.5% NaCl; the Ip of 3.5% CaCl2 was slightly higher than that of 3.5% MgCl2. The concept of the Ip cumulative effect with time (S) was first proposed to determine the freeze-thaw destruction induced by chloride-based deicers. The durable life of the concrete exposed to chloride-based deicers decreased with the S of the deicers, and the mass loss of the concrete increased with the S of the deicers.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Smart Materials for Construction · Concrete and Cement Materials Research · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Use of chloride-based ice control products for sustainable winter maintenance: a balanced perspective10.1016/j.coldregions.2012.11.001 ↗
2. Durability of steel reinforced concrete in chloride environments: an overview10.1016/j.conbuildmat.2011.12.038 ↗
3. Cementitious materials exposed to high concentration of sodium chloride solution: formation of a deleterious chemical phase change10.1016/j.conbuildmat.2018.02.066 ↗
4. Shi · 2009
5. Field test of organic deicers as prewetting and anti-icing agents for winter road maintenance10.3141/2272-15 ↗
6. Environmental impact of chemical deicers – a review10.1007/s11270-005-8265-9 ↗
7. EPA, Technical development document for the final effluent limitations guidelines and new source performance standards for the airport deicing category, Washington, D.C. Research Rep., EPA-821-R-12-005 (2012) 24–45.
8. New approaches to enhance pollutant removal in artificially aerated wastewater treatment systems10.1016/j.scitotenv.2018.01.261 ↗
9. Environmental risks of snow and ice control materials10.1002/9781119185161.ch10 ↗
10. Transport Association of Canada, Salt smart train, the trainer program. Salt smart learning guide, 2003.
11. Salt institute deicing salt and corrosion, http://www. altinstitute.org/th2020s.html. Accessed in July 2007.
12. TRB, Guidelines for the selection of snow and ice control materials to mitigate environmental impacts, NCHRP Report 577, Washington, D.C., 2007.
13. Blomqvist · 2008
14. Method for the rapid determination and dosage control of chloride snow melting agent concentration. http://www.chem17.com/companynews/detail/244293.html.
15. Studies of salt scaling of concrete
16. Interaction between loading, freeze–thaw cycles, and chloride salt attack of concrete with and without steel fiber reinforcement10.1016/S0008-8846(02)00746-9 ↗
17. Performance of concrete exposed to freezing and thawing in different saline environments10.3846/jcem.2010.35 ↗
18. Freeze–thaw damage and chemical change of a Portland cement concrete in the presence of diluted deicers10.1617/s11527-009-9557-0 ↗
19. Freeze-thaw durability of Portland cement concrete subjected to aircraft deicer10.4028/www.scientific.net/AMR.295-297.1856 ↗
20. Ge · 2008
21. A working hypothesis for further studies of frost resistance
22. Theory of volume change in hardened portland cement pastes during freezing
23. The international cooperative test of the critical degree of saturation method of assessing the freeze/thaw resistance of concrete10.1007/BF02478694 ↗
24. Micro-ice-lens formation in porous solid10.1006/jcis.2001.7828 ↗
25. A review of salt scaling: I. Phenomenology10.1016/j.cemconres.2007.03.005 ↗
26. Mechanism for salt scaling10.1111/j.1551-2916.2006.00913.x ↗
27. Pressure in a tank due to water-ice phase transformation10.1088/1361-6404/aa7bf6 ↗
28. Factors influencing the pressure of ice formation in NaCl solution
29. Effects of salt-crystallization of sodium sulfate on deterioration of concrete
30. Speight · 2005
31. Haynes · 2014
32. A review of classical and nonclassical nucleation theories10.1021/acs.cgd.6b00794 ↗
33. Nucleation and phase transformation pathways in electrolyte solutions investigated by in situ microscopy techniques10.1016/j.cocis.2018.04.002 ↗
34. Investigation into freezing point depression in storm water ponds caused by road salt10.1016/j.coldregions.2016.09.003 ↗
35. The specific heat capacity of brine was determined by Newton's law of cooling
36. Thermal conductivity of aqueous sodium chloride solutions from 20 to 330 °C10.1021/je60086a001 ↗
37. Mechanics of ice-structure interaction10.1016/S0013-7944(01)00032-7 ↗
38. Song · 2006
39. Different deicing salt influence on the durability of concrete in freeze-thaw environment