journal article·2019-07

Determination of the stripping process of asphalt mixtures and the effective mix design and SFE parameters on its different phases

Niloofar Esmaeili, Gholam Hossein Hamedi, Mojtaba Khodadadi

Publisher page

Abstract

Abstract In the present study, attempts were made to determine the process and different phases of stripping by conducting repeated load tests on 24 different asphalt mixtures and specify the effect of thermodynamic (free energy of adhesion, free energy of cohesion, and debonding energy) and mix design parameters (specific surface area of aggregates, asphalt film thickness, and permeability) on different phases of the process. The results revealed that the stripping process consisted of two separate phases with varying intensities and mechanisms. Free energy of cohesion and the debonding energy had the most significant effect on the rise and decline of loading cycles to the initial stripping point, respectively. In the phase after the initial stripping point where the system’s tendency to stripping grew even higher, the specific surface area of aggregates and the debonding energy had the greatest impact on the decrease and increase of the stripping rate respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Lubricants and Their Additives · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Lytton · 2005
2. Laboratory evaluation of resistance to moisture damage in asphalt mixtures10.1016/j.asej.2012.10.009 ↗
3. Little · 2003
4. Majidzadeh · 1968
5. Rutting and moisture damage resistance of high reclaimed asphalt pavement warm mixed asphalt: loaded wheel tracking vs. conventional methods10.1080/14680629.2013.812841 ↗
6. Adhesion and Disbonding Mechanisms of Asphalt Used in Highway Construction and Maintenance
7. Tarrer · 1991
8. Kiggundu · 1988
9. Yoon · 1987
10. A synthesis of theories and mechanisms of bitumen-aggregate adhesion including recent advances in quantifying the effects of water
11. Terrel · 1989
12. Terrel · 1994
13. Characterization of asphalt materials’ moisture susceptibility using multiple methods10.1016/j.conbuildmat.2017.08.032 ↗
14. Modelling of combined physical–mechanical moisture-induced damage in asphaltic mixes Part 2: moisture susceptibility parameters10.1080/10298430701792227 ↗
15. Influence of moisture conditioning on healing of asphalt binders10.1016/j.conbuildmat.2017.04.087 ↗
16. Limits on adhesive bond energy for improved resistance of hot-mix asphalt to moisture damage10.1177/0361198106197000101 ↗
17. Measuring the effect of moisture on asphalt aggregate bond with the bitumen bond strength test10.3141/2209-09 ↗
18. Evaluation of Hamburg wheel-tracking device to predict moisture damage in hot-mix asphalt
19. Yetkin · 2001
20. Interfacial Lifshitz-van der Waals and polar interactions in macroscopic systems10.1021/cr00088a006 ↗
21. Use of surface free energy properties to predict moisture damage potential of asphalt concrete mixture in cyclic loading condition10.1007/BF02895836 ↗
22. MRT, Iran road pavement code, Ministry of Road and Transportation, Code No.234, Iran, 2011.
23. Henan Kingway Chemicals Co., Nano Calcium Carbonate (NM-1060). http://1001836.en.makepolo.com/products/Nano-Calcium-Carbonate%28NM-1060%29 p19754185.html.
24. CuO, ZrO2, and ZnO nanoparticles as antiwear additive in oil lubricants10.1016/j.wear.2007.11.013 ↗
25. AkzoNobel Asphalt Applications, Wetfix BE. https://sc.akzonobel.com/en/asphalt/Pages/product-detail.aspx?prodID=8557.
26. Hefer · 2004
27. Bitumen surface energy characterization using a contact angle approach10.1061/(ASCE)0899-1561(2006)18:6(759) ↗
28. Volumetric requirements for Superpave mix design NCHRP Rep. No. 567