Improving the resistance to moisture damage of cold mix asphalt modified by eco-friendly Microbial Carbonate Precipitation (MCP)
Source abstract
Abstract
Abstract This study investigated the effect of Microbial Carbonate Precipitation (MCP) induced by Sporosarcina pasteurii on the moisture susceptibility of Cold Mix Asphalt (CMA) mixtures. In addition to being eco-friendly, MCP creates a layer of hydrophobic CaCO3 that facilitates great bonding between the bituminous mastic and the surface of aggregates. Two approaches of bio-precipitation treatment were studied. The first approach was implemented by the pre-processing of the aggregates’ surface with MCP to be used in manufacturing the CMA mixture. In the second approach, the optimum water content was replaced by a medium culture containing bacteria and Urea-CaCl2 nutrient solution when preparing the CMA mixture. The boiling water test and an image processing technique were utilized to examine the effect of each bio-precipitation treatment approach on the stripping resistance. The Indirect Tensile Strength Ratio (TSR), Fracture Energy Ratio (FER), Percentage of Toughness Loss (PTL), Pulse Velocity Ratio (PVR) specified by the ultrasonic pulse velocity test, and Electrical Resistivity Ratio (ERR) of all the CMA mixtures under wet condition in comparison to dry conditions were studied. The ANOVA test performed on the results at 95% confidence level showed that the mixtures prepared by the first approach had considerably higher TSR and FER, and lower PTL than the control specimens, which reflects significantly improved resistance to moisture damage. For the second approach, these improvements were higher than the control specimens (P-value 0.05) higher than the control specimens, respectively. The bitumen coating ratio measured after the boiling water test was higher than that of the control mixtures for each of treatment approaches. The SEM observation confirmed the presence of calcium carbonate precipitates in the modified mixtures. The results showed that while the first approach considerably improves the adhesion within CMA mixtures, the second approach affects their cohesion.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microbial Applications in Construction Materials · Corrosion Behavior and Inhibition · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Experimental characterization of high-performance fiber-reinforced cold mix asphalt mixtures10.1016/j.conbuildmat.2014.01.089 ↗
2. Stiffness of cold asphalt mixtures with recycled aggregates from construction and demolition waste10.1016/j.conbuildmat.2014.12.045 ↗
3. A proposed methodology for the global study of the mechanical properties of cold asphalt mixtures10.1016/j.matdes.2013.12.079 ↗
4. Mechanical properties of an upgrading cold-mix asphalt using waste materials10.1061/(ASCE)MT.1943-5533.0000540 ↗
5. Built environment: new default for asphalt?10.1289/ehp.116-a379a ↗
6. The shell bitumen handbook
7. Needham · 1996
8. A laboratory study on cold-mix, cold-lay emulsion mixtures
9. Effect of cement on emulsified asphalt mixtures10.1007/s11665-007-9095-2 ↗
10. Measuring the effect of moisture on asphalt-aggregate bond with the bitumen bond strength test10.3141/2209-09 ↗
11. De · 2005
12. Influence of the interfacial composition on the adhesion between aggregates and bitumen: investigations by EDX, XPS and peel tests10.1016/j.ijadhadh.2011.01.005 ↗
13. Evaluation of moisture susceptibility in hot mix asphalt (HMA) Contains nano clay
14. Effect of Portland cement and lime additives on properties of cold in-place recycled mixtures with asphalt emulsion10.1016/j.conbuildmat.2008.07.020 ↗
15. Moisture susceptibility evaluation of asphalt mixtures containing Evonik, Zycotherm and hydrated lime10.1016/j.conbuildmat.2017.12.113 ↗
16. Evaluation of moisture susceptibility of asphalt mixture using liquid anti-stripping agents10.1016/j.conbuildmat.2017.03.214 ↗
17. Reduction of moisture susceptibility of cold asphalt mixture with Portland cement and bentonite nanoclay additives10.1016/j.jclepro.2017.12.163 ↗
18. Emulsified cold recycled mixtures using cement kiln dust and coal waste ash-mechanical-environmental impacts10.1016/j.jclepro.2018.07.155 ↗
19. Influence of urea and calcium dosage on the effectiveness of bacterially induced carbonate precipitation on limestone10.1016/j.ecoleng.2009.03.025 ↗
20. Self-healing cementitious materials based on bacteria and nutrients immobilized respectively10.1016/j.conbuildmat.2016.09.023 ↗
21. Use of silica gel or polyurethane immobilized bacteria for self-healing concrete10.1016/j.conbuildmat.2011.06.054 ↗
22. Ureolytic bacteria and calcium carbonate formation as a mechanism of strength enhancement of sand
23. Modified recycled concrete aggregates for asphalt mixture using microbial calcite precipitation10.1039/C5RA04203H ↗
24. Microbial carbonate precipitation for the improvement of quality of recycled aggregates10.1016/j.jclepro.2017.04.051 ↗
25. Quality improvement of mixed and ceramic recycled aggregates by biodeposition of calcium carbonate10.1016/j.conbuildmat.2017.08.039 ↗
26. A review: self-healing in cementitious materials and engineered cementitious composite as a self-healing material10.1016/j.conbuildmat.2011.08.086 ↗
27. Microbial carbonate precipitation in construction materials: a review10.1016/j.ecoleng.2009.02.006 ↗
28. Microbial cementation of ureolytic bacteria from the genus Bacillus: a review of the bacterial application on cement-based materials for cleaner production10.1016/j.jclepro.2015.01.019 ↗
29. Precipitation of calcium carbonate by Vibrio spp. from an inland saltern10.1111/j.1574-6941.1994.tb00066.x ↗
30. A. B. A. E. Manual, “Manual Series No. 19 (MS-19),” Asphalt Institute, 1979.
31. Calcium carbonate bio-deposition in clay and its effect to increase soil resistance
32. Effect of curing conditions on properties of cement asphalt emulsion mixture10.1016/j.conbuildmat.2017.12.179 ↗
33. Measuring moisture susceptibility of cold mix asphalt with a modified boiling test based on digital imaging10.1016/j.conbuildmat.2015.12.093 ↗
34. Measuring the influence of aggregate coating on the workability and moisture susceptibility of cold-mix asphalt10.3141/2372-06 ↗
35. The effect of polymer modification on hot mix asphalt fracture at tensile loading conditions10.1080/10298436.2010.488735 ↗
36. Utilization of waste fibers in stone matrix asphalt mixtures10.1016/j.resconrec.2004.04.005 ↗
37. An ultrasonic technique for the measurement of adhesion of asphalt to aggregate10.1163/156856191X00134 ↗
38. Application of ultrasonic method in asphalt concrete testing for fatigue life estimation10.1016/j.ndteint.2004.03.006 ↗
39. Electrical and mechanical properties of asphalt concrete containing conductive fibers and fillers10.1016/j.conbuildmat.2016.06.063 ↗
40. Rheological behavior and properties of bitumen modified with polymeric coated precipitated calcium carbonate10.1016/j.conbuildmat.2010.12.043 ↗
41. Characterization of permanent deformation resistance of precipitated calcium carbonate modified asphalt mixture10.3846/13923730.2014.890654 ↗
42. Moisture damage in asphaltic mixtures