Determination of in-field temperature variations in fresh HMA and corresponding compaction temperatures
Source abstract
Abstract
Abstract Hot mix asphalt (HMA) compacted at low temperatures develops many distresses due to high air voids. Asphalt compaction operations in the field are mostly based on the experience of field staff. Hence, independent of the actual temperature of the HMA. In this study, temperature variation in hot mix asphalt (HMA) was investigated during paving operations at eight test locations in field. Two most commonly used HMA layer thicknesses i.e. 5 cm and 8 cm were studied. Temperature of the fresh HMA layer was noted at the centre, surface and at the interface points by four node K-type thermocouple assembly. The average laying temperature of the HMA for eight tests was calculated as 136.92 °C. Whereas, the average compaction start temperature for eight tests was noted as 127.81 °C which shows the critical temperature loss of 9.11 °C before the compaction starts. The average compaction end temperature calculated was 62.89 °C which is below the common cut off temperature of 80 °C. Temperature difference between day and night tests was 10 °C which can be attributed as the effect of sunlight. The results of this study can be helpful to the field staff in decision making during paving operations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Smart Materials for Construction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Investigations on behavioral characteristics of asphalt binder with crumb rubber modification: rheological and thermo-chemical approach10.1016/j.conbuildmat.2018.06.087 ↗
2. Asphalt rubber concrete fabricated by the dry process: laboratory assessment of resistance against reflection cracking10.1016/j.conbuildmat.2017.11.081 ↗
3. Rheological characterisation of terminal blend rubberised asphalt binder containing polymeric additive and sulphur10.1080/14680629.2017.1305436 ↗
4. Assessment of compaction temperatures on hot mix asphalt (HMA) properties
5. Understanding asphalt compaction: an action research strategy
6. Thermal properties of asphalt concrete: a numerical and experimental study10.1016/j.conbuildmat.2017.10.068 ↗
7. Investigation into causes of in-place rutting in asphalt pavement10.1016/j.conbuildmat.2011.09.007 ↗
8. Predicting maximum pavement surface temperature using maximum air temperature and hourly solar radiation
9. Mathematical model for calculation of pavement temperatures: comparison of calculated and measured temperatures10.3141/1764-19 ↗
10. Serafin · 1962
11. The urban heat island effect, its causes, and mitigation, with reference to the thermal properties of asphalt concrete10.1016/j.jenvman.2017.03.095 ↗
12. Temperature predictions for asphalt pavement with thick asphalt layer10.1016/j.conbuildmat.2017.12.145 ↗
13. Modeling temperature profile of hot-mix asphalt in flexible pavement
14. Cooling time estimation of newly placed hot-mix asphalt pavement in different weather conditions10.1061/(ASCE)CO.1943-7862.0000832 ↗
15. Temperature segregation and its impact on the quality and performance of asphalt pavements10.1007/s11709-017-0451-5 ↗
16. The compaction characteristics of hot mixed asphalt mixtures10.1007/s11595-014-1027-z ↗
17. Density profile of hot mix asphalt layer during compaction with various types of rollers and lift thickness10.1016/j.conbuildmat.2016.05.129 ↗
18. Too hot to handle, too cold to control-Influence of compaction temperature on the mechanical properties of asphalt
19. Evaluation of the mechanical properties of field- and laboratory-compacted hot-mix asphalt10.1061/(ASCE)MT.1943-5533.0000963 ↗
20. Construction-related asphalt concrete pavement temperature and density differentials10.3141/1813-09 ↗
21. Planning the asphalt construction process: towards more consistent paving and compaction operations