Evaluating the cracking behavior of ECC beam-column connections under cyclic loading by acoustic emission analysis
Source abstract
Abstract
Abstract This paper presents the results from an experimental program conducted to assess the cracking behavior of reinforced concrete beam-column connections cast with engineered cementitious composites (ECC). Reversed cyclic loading tests in conjunction with acoustic emission (AE) monitoring were completed on all specimens till failure. Four ECC mixtures containing four different types of fibers along with a control conventional concrete (CC) mixture were tested. The AE data obtained from all tests were filtered and analyzed to identify and evaluate the crack growth in all beam-column connections. First, the changes in the AE parameters such as signal amplitudes, number of hits, and cumulative signal strength were considered. Then, additional b-value and intensity analyses on both signal amplitude and strength were performed to develop three further AE parameters including b-value, historic index (H (t)), and severity (Sr). The impact of fibers type and sensor location on the aforementioned AE parameters was examined. The AE analysis completed in this study led to the identification of the first cracks prior to their visual observation, regardless of fibers type and/or sensor location. The studied AE parameters were highly correlated to the process of crack propagation in all specimens until failure. The results also showed that varying the types of fibers in ECC yielded non-significant effect on the AE signal characteristics (in terms of signal amplitudes) throughout the tests. The intensity analysis parameters (H (t) and Sr) were eventually used to generate a damage classification chart to classify the stages of first crack and maximum load in the tested specimens.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Rock Mechanics and Modeling · Geophysical Methods and Applications · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Influence of rubber content on enhancing the structural behaviour of beam–column joints
2. Acoustic emission based damage assessment method for prestressed concrete structures: Modified index of damage10.1016/j.engstruct.2013.12.037 ↗
3. Classification of alkali-silica reaction damage using acoustic emission: a proof-of-concept study10.1016/j.conbuildmat.2015.07.093 ↗
4. Evaluation of damage progression in concrete structures due to reinforcing steel corrosion using acoustic emission monitoring10.1007/s13349-015-0144-5 ↗
5. Detection of bond failure in the anchorage zone of reinforced concrete beams via acoustic emission monitoring10.1088/0964-1726/25/7/075034 ↗
6. Acoustic emission monitoring for bond integrity evaluation of reinforced concrete under pull-out tests10.1177/1369433216678864 ↗
7. Assessment of crack development in engineered cementitious composites based on analysis of acoustic emissions10.1061/(ASCE)MT.1943-5533.0002690 ↗
8. Use of the digital image correlation and acoustic emission technique to study the effect of structural size on cracking of reinforced concrete10.1016/j.engfracmech.2015.06.038 ↗
9. ASTM · 2012
10. ASTM · 2012
11. ASTM · 2012
12. ASTM · 2013
13. ASTM · 2014
14. Behavior of PVA fiber-reinforced cementitious composites under static and impact flexural effects10.1061/(ASCE)MT.1943-5533.0000691 ↗
15. Experimental study on AE characteristics of three-point-bending concrete beams10.1016/j.cemconres.2003.08.021 ↗
16. Assessing damage of reinforced concrete beam using ‘‘b-value’’ analysis of acoustic emission signals10.1061/(ASCE)0899-1561(2003)15:3(280) ↗
17. CSA (Canadian Standards Association) · 2004
18. Identification of cracking mechanisms in scaled FRP reinforced concrete beams using acoustic emission10.1007/s11340-012-9692-3 ↗
19. Ervin · 2007
20. Acoustic emission monitoring of a reinforced concrete shear wall by b-value-based outlier analysis10.1177/1475921712461162 ↗
21. Development of green engineered cementitious composites using iron ore tailings as aggregates10.1016/j.conbuildmat.2013.03.088 ↗
22. Properties of self-consolidating engineered cementitious composite modified with rubber10.1061/(ASCE)MT.1943-5533.0002219 ↗
23. Effect of fiber type on the behavior of cementitious composite beam-column joints under reversed cyclic loading10.1016/j.conbuildmat.2018.08.024 ↗
24. Tensile and fiber dispersion performance of ECC (engineered cementitious composites) produced with ground granulated blast furnace slag10.1016/j.cemconres.2007.04.006 ↗
25. Development of a self-consolidating engineered cementitious composite employing electrosteric dispersion/stabilization10.1016/S0958-9465(02)00057-4 ↗
26. Damage analysis of CFRP-confined circular concrete-filled steel tubular columns by acoustic emission techniques10.1088/0964-1726/24/8/085017 ↗
27. Damage evaluation of fiber reinforced plastic-confined circular concrete-filled steel tubular columns under cyclic loading using the acoustic emission technique10.1088/1361-665X/aa57c9 ↗
28. From micromechanics to structural engineering - The design of cementitious composites for civil engineering applications
29. Tensile behavior of engineered cementitious composites with discontinuous random steel fibers10.1111/j.1151-2916.1996.tb07882.x ↗
30. Innovations Forum: Engineered cementitious composites for structural applications10.1061/(ASCE)0899-1561(1998)10:2(66) ↗
31. Tensile strain-hardening behavior of polyvinyl alcohol engineered cementitious composites (PVA-ECC)
32. Interface tailoring for strain-hardening polyvinyl alcohol-engineered cementitious composites (PVA-ECC)
33. Tailoring E.C.C. for special attributes: a review10.1007/s40069-012-0018-8 ↗
34. Acoustic emission monitoring and damage assessment of FRP-strengthened reinforced concrete columns under cyclic loading10.1016/j.conbuildmat.2017.03.169 ↗
35. Effect of fiber volume fraction on the off-crack plane energy in strain-hardening engineered cementitious composites10.1111/j.1151-2916.1995.tb07979.x ↗
36. Behavior of hybrid-fiber engineered cementitous composites subjected to dynamic tensile loading and projectile impact10.1061/(ASCE)0899-1561(2005)17:2(143) ↗
37. Mistras Group · 2007
38. Monitoring of the fracture mechanisms induced by pull-out and compression in concrete10.1016/j.engfracmech.2014.07.020 ↗
39. Phenomenological model of corrosion process in reinforced concrete identified by acoustic emission
40. Acoustic emission for characterising the crack propagation in strain-hardening cement-based composites (SHCC)10.1016/j.cemconres.2014.12.003 ↗
41. Physical Acoustics · 2005
42. Characterization of damage due to abrasion in SCC by acoustic emission analysis
43. Engineered cementitious composites: can composites be accepted as crack-free concrete?10.3141/2164-01 ↗
44. Effect of fly ash and PVA fiber on microstructural damage and residual properties of engineered cementitious composites exposed to high temperatures10.1061/(ASCE)MT.1943-5533.0000335 ↗
45. Experimental and numerical analysis of crack evolution in concrete through acoustic emission technique and mesoscale modelling10.1016/j.engfracmech.2016.03.044 ↗
46. Estimating operating load conditions on reinforced concrete highway bridges with b-value analysis from acoustic emission monitoring10.1177/1475921710365424 ↗
47. Multiple cracking and fiber bridging characteristics of engineered cementitious composites under fatigue flexure10.1061/(ASCE)0899-1561(2004)16:5(433) ↗
48. A review on durability properties of strain hardening fibre reinforced cementitious composites (SHFRCC)10.1016/j.cemconcomp.2006.12.014 ↗
49. Acoustic emission monitoring of early corrosion in prestressed concrete piles10.1002/stc.1723 ↗
50. An experimental study on cracking evolution in concrete and cement mortar by the b-value analysis of acoustic emission technique10.1016/j.cemconres.2012.05.003 ↗
51. Acoustic emission during flexural deformation of reinforced concrete under incremental cyclic loading10.1520/JTE20140507 ↗
52. High early strength engineered cementitious composites
53. Engineered cementitious composites with high-volume fly ash
54. Use of high volumes of fly ash to improve ECC mechanical properties and material greenness
55. Performance of hybrid-fiber ECC blast/shelter panels subjected to drop weight impact10.1061/(ASCE)0899-1561(2007)19:10(855) ↗
56. Development of engineered cementitious composites with limestone powder and blast furnace slag10.1617/s11527-009-9549-0 ↗