journal article·2019-08

Activated slag as partial replacement of cement mortars: Effect of temperature and a novel admixture

Chaaruchandra Korde, Matthew Cruickshank, Roger P. West, Claudia Pellegrino

Publisher page

Abstract

Abstract This paper, from the perspective of the precast industry, reports on a study into the activation of mortar mixes with ground granulated blast furnace slag (GGBS) (0, 30, 50, 70%) and cement (CEM I 42.5R) using temperature (ambient (20 °C) and moderate (35 °C)) and accelerating admixtures (a novel chloride free activator and a commercial admixture) to enhance very early age strength. The discrete temperature activation is found to provide larger improvements in early age strength compared to the use of admixtures. However, irrespective of temperature activation, the novel admixture, in absolute terms, provides greater benefit in strength activation of GGBS mortars compared to the existing commercial admixture. Further, most of the GGBS mortar mixes equalled or surpassed the 28-day strength of the control mixes without any cross-over effects.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Building materials and conservation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Monitoring of the curing process in precast concrete slabs: an experimental study10.1016/j.conbuildmat.2016.06.041 ↗
2. An overview of utilization of steel slag10.1016/j.proenv.2012.10.108 ↗
3. British Ready Mix Concrete Association (BRMCA), 2012, “Cement type/ early age properties – The use of low CO2 cements in concrete should not restrict the rate of construction” https://www.brmca.org.uk//documents/Cement_Type_Early_Age_Properties_23_Jun_11.pdf.
4. Global strategies and potentials to curb CO2 emissions in cement10.1016/j.jclepro.2012.10.049 ↗
5. R. Leese, D. Casey. Embodied CO2e of UK cement, additions and cementitious material MPA Cement. (http://cement.mineralproducts.org/documents/Factsheet_18.pdf).
6. Use of iron and steel industry by-product (GGBS) in cement paste and mortar10.1016/j.resconrec.2012.09.002 ↗
7. Chloride binding in GGBS Concrete10.1016/S0008-8846(96)00180-9 ↗
8. Effects of curing conditions on properties of concrete using slag replacement10.1016/S0008-8846(00)00200-3 ↗
9. Carbonation of CH and C-S-H in composite cement pastes containing high amounts of BFS10.1016/j.cemconres.2009.10.020 ↗
10. Durability of mortars containing ground granulated blast-furnace slag in acid and sulphate environment10.1016/j.proeng.2015.06.118 ↗
11. Hydration, structure, and properties of blast furnace slag cements, mortars, and concrete
12. The microstructure and mechanical properties of blended cements hydrated at various temperatures10.1016/S0008-8846(01)00471-9 ↗
13. Reactivity of blast-furnace slag in Portland cement blends hydrated under different conditions10.1016/S0008-8846(01)00587-7 ↗
14. Studies on Portland cement with large amount of slag10.1016/S0008-8846(00)00208-8 ↗
15. Combined effect of chemical nature and fineness of mineral powders on Portland cement hydration10.1617/s11527-009-9519-6 ↗
16. Influence of limestone on the hydration of Portland cements10.1016/j.cemconres.2008.01.002 ↗
17. Effect of curing condition on the mortars with and without GGBFS10.1016/j.conbuildmat.2006.08.013 ↗
18. Limestone filler cement in low w/c concrete: a rational use of energy10.1016/S0008-8846(02)01087-6 ↗
19. Activation of blast furnace slag by a new method10.1016/j.cemconres.2009.05.012 ↗
20. Effects of different mineral admixtures on the properties of fresh concrete: mechanical properties, durability and hybrid use with OPC10.1155/2014/986567 ↗
21. Mineral admixtures in mortars: effect of inert materials on short term hydration10.1016/S0008-8846(03)00183-2 ↗
22. Mineral admixtures in mortars: quantification of the physical effects of inert materials on short-term hydration
23. Structure and behaviour of slag Portland cement hydrates
24. The effect of w/b and temperature on the hydration and strength of blastfurnace slag cements10.1016/j.conbuildmat.2015.11.001 ↗
25. The effect of temperature on the hydration of composite cements containing limestone powder and fly ash10.1617/s11527-011-9819-5 ↗
26. Effect of curing temperature on hydration and strength of cement paste with granulated blast furnace slag
27. Effect of temperature on the strength development of mortar mixes with GGBS and fly ash10.1680/jmacr.16.00268 ↗
28. Factors affecting the strength of alkali-activated slag10.1016/0008-8846(94)90026-4 ↗
29. Early activation and properties of slag cement10.1016/0008-8846(90)90060-B ↗
30. Effect of fineness and particle size distribution of granulated blast-furnace slag on the hydraulic reactivity in cement systems10.1680/adcr.2005.17.4.161 ↗
31. M. Cyr, C. Patapy. Synergic effects of activation routes of ground granulated blast-furnace slag (GGBS) used in the precast industry, 2016. .10.1007/978-981-10-6713-6_58 ↗
32. Strength development of mortars containing ground granulated blast-furnace slag: effect of curing temperature and determination of apparent activation energies10.1016/j.cemconres.2005.11.002 ↗
33. Influence of slag composition and temperature on the hydration and microstructure of slag blended cements10.1016/j.conbuildmat.2016.09.057 ↗
34. Comparison of different methods for activation of ordinary Portland cement-slag mortars10.1016/j.conbuildmat.2010.06.060 ↗
35. The effect of chemical activators on early strength of ordinary Portland cement-slag mortars10.1016/j.conbuildmat.2010.04.006 ↗
36. The role of the alumina content of slag, plus the presence of additional sulphate on the hydration and microstructure of Portland cement slag blends10.1016/j.cemconres.2014.07.018 ↗
37. Degrees of reaction of the slag in some blends with Portland cements10.1016/0008-8846(95)00190-5 ↗
38. Hydration products, morphology and microstructure of activated slag cement10.1007/s40069-013-0056-x ↗
39. Strength optimization of tailor-made cement with limestone filler and blast furnace slag10.1016/j.cemconres.2004.09.023 ↗
40. Hydration of slag blended cements10.1016/j.cemconcomp.2012.05.007 ↗
41. Strength development of ternary blended cement with limestone filler and blast furnace slag10.1016/S0958-9465(01)00056-7 ↗
42. Alkali activated binders: a review Part 1: historical background, terminology, reaction mechanizm and hydration products
43. Hydration and properties of slag cement activated by alkali and sulphate10.1061/(ASCE)MT.1943-5533.0001879 ↗
44. R. Myrdal. Accelerating Admixture for concrete: State-of-the-art Sintef Reprot, SbF BK A07025, ISBN 978-82-536-0989-8.
45. European Standard IS EN196 – 1: 200510.5235/ecj.v1n1.153 ↗
46. Hewlett · 1998
47. Influence of tertiary alkanolamines on portland-cement hydration10.1111/j.1151-2916.1993.tb03934.x ↗
48. Effect of triisopropanolamine on hydration and strength development of cements with different character
49. On the mechanism of strength enhancement of cement paste and mortar with trisopropanolamine10.1016/j.cemconres.2003.11.018 ↗
50. The effect of thiocynates on the hydration of portland cement at low temperatures10.1016/0040-6031(95)02323-T ↗
51. I. Reknes. “Quality lignosulfonate for concrete”, The Materbuilder, 84 – 90, January 2013.
52. Design and function of novel superplasticier for more durable high performance concrete (superplast project)10.1016/j.cemconres.2008.04.007 ↗
53. Adsorption of polyelectrolytes and its influence on the rheology, seta potential and micro structure of various cement hydrate phase10.1016/j.jcis.2008.04.052 ↗
54. On the mechanizms of consumption of calcium lignosulfonate by cement paste10.1016/j.cemconres.2017.02.026 ↗
55. The influence of sodium salts and gypsum on alite hydration10.1016/j.cemconres.2015.04.015 ↗
56. Montgomery · 2014