journal article·2019-08

Cation substitution induced reactivity variation on the tricalcium silicate polymorphs determined from first-principles calculations

Qianqian Wang, Xiaomei Gu, Hao Zhou, Xin Chen, Xiaodong Shen

Publisher page

Abstract

Abstract Alite is one of the most important phases in cement clinker. It is a solid solution of tricalcium silicate (Ca3SiO5, C3S for short, C = CaO, S = SiO2) which has seven polymorphs. M1-C3S and M3-C3S are the most common polymorphs in cement clinker. Much experimental research had identified that cations doping affected the polymorph of alite and the hydration properties of cement clinker. This article systemically investigated the influence of cation doping on crystal structures and electronic structures of M1-C3S and M3-C3S employed by first-principles calculations based on density functional theory. Non-bonding electrons dispersed on the p orbitals of Oi (the isolated oxygen atoms) and Oc (covalent bonded oxygens in nesosilicate tetrahedrons) in C3S were determined and quantified by the integration of partial density of states at specified energy levels. Non-bonding electrons are the most probable electrons that will be transferred when the oxygen atoms suffer from electrophilic attack as minerals contact with water. The results showed that there were more non-bonding electrons in both of Oi and Oc atoms in M1-C3S than that in M3-C3S, which lead to M1-C3S more reactive. The substituted cations with specific valence electrons configurations and weak electronegativity are determined, which will typically increase the amount of non-bonding electrons in the systems generally. These would help to understand how cation doping affected the hydration of alite, and furthermore, improve the quality of cement clinker.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Clay minerals and soil interactions · Recycling and utilization of industrial and municipal waste in materials production

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. Insight into silicate-glass corrosion mechanisms10.1038/nmat2301 ↗
2. Reaction sintering of zircon–dolomite mixtures10.1016/S0955-2219(00)00212-0 ↗
3. White-light-emitting Eu2+ and Mn2+-codoped silicate phosphors synthesized through combustion process10.1016/j.ssc.2005.09.021 ↗
4. Cement and carbon emissions10.1617/s11527-013-0114-5 ↗
5. Optimization of the content of tricalcium silicate of high cementing clinker10.1007/s11595-011-0271-8 ↗
6. Research on the formation of M1-type alite doped with MgO and SO3—A route to improve the quality of cement clinker with a high content of MgO10.1016/j.conbuildmat.2018.06.078 ↗
7. Effect of SO3 and MgO on Portland cement clinker: formation of clinker phases and alite polymorphism10.1016/j.conbuildmat.2014.02.029 ↗
8. Alite-ye'elimite cement: synthesis and mineralogical analysis10.1016/j.cemconres.2012.10.020 ↗
9. Effect of triethanolamine on cement hydration toward initial setting time10.1016/j.conbuildmat.2017.02.072 ↗
10. Interaction between cement and chemical admixture from the point of cement hydration, absorption behaviour of admixture, and paste rheology10.1016/S0008-8846(99)00004-6 ↗
11. Reactions and reactivities of compounds in hydraulic cements10.1016/0167-2738(90)90467-6 ↗
12. Impact of chemical impurities on the crystalline cement clinker phases determined by atomistic simulations10.1021/cg200212c ↗
13. Impact of annealing on the early hydration of tricalcium silicate10.1111/jace.12691 ↗
14. The effect of magnesium and zinc ions on the hydration kinetics of C3S10.1111/jace.13156 ↗
15. Analysis of disorder in tricalcium silicate by 29Si NMR spectroscopy and additional methods10.1016/j.cemconres.2013.12.006 ↗
16. Hydration characteristics and hydration products of tricalcium silicate doped with a combination of MgO, Al2O3 and Fe2O310.1016/j.tca.2008.03.013 ↗
17. Influence of Cr, Ni, and Zn on the properties of pure clinker phases: Part I. C3S10.1016/S0008-8846(99)00009-5 ↗
18. Research review of cement clinker chemistry10.1016/j.cemconres.2015.05.018 ↗
19. Effect of strontium dioxide on the crystal structure and properties of tricalcium silicate10.1680/adcr.11.00035 ↗
20. Crystal structure refinement and hydration behaviour of 3CaO·SiO2 solid solutions with MgO, Al2O3 and Fe2O310.1016/j.jeurceramsoc.2004.10.031 ↗
21. Crystal chemistry and reactivity of the magnesium oxide-stabilized alites10.1111/j.1151-2916.1975.tb18984.x ↗
22. Structure and properties of tricalcium silicate doped with MgO, Al2O3 and Fe2O3
23. The influence of the alite polymorphism on the strength of the portland cement10.1016/S0008-8846(02)00756-1 ↗
24. Understanding and controlling the reactivity of the calcium silicate phases from first principles10.1021/cm203127m ↗
25. Predicting electronic structure in tricalcium silicate phases with impurities using first-principles10.1021/jp510597e ↗
26. Influence of (Al, Fe, Mg) impurities on triclinic Ca3SiO5: interpretations from DFT calculations10.1021/cg401647f ↗
27. Relation between reactivity and electronic structure for α’L-, β-and γ-dicalcium silicate: a first-principles study10.1016/j.cemconres.2013.12.004 ↗
28. Molecular dynamics study on the Tri-calcium silicate hydration in sodium sulfate solution: interface structure, dynamics and dissolution mechanism10.1016/j.conbuildmat.2018.03.035 ↗
29. Water adsorption on the β-dicalcium silicate surface from DFT simulations10.3390/min8090386 ↗
30. Insight on tricalcium silicate hydration and dissolution mechanism from molecular simulations10.1021/acsami.5b02505 ↗
31. First principles methods using CASTEP
32. Self-consistent equations including exchange and correlation effects10.1103/PhysRev.140.A1133 ↗
33. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
34. Crystal structure of tricalcium silicate from a portland cement clinker and its application to quantitative XRD analysis
35. Tricalcium silicate Ca3SiO5 superstructure analysis: a route towards the structure of the M1 polymorph10.1524/zkri.2012.1425 ↗
36. Special points for Brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
37. A Broyden—Fletcher—Goldfarb—Shanno optimization procedure for molecular geometries10.1016/0009-2614(85)80574-1 ↗
38. X-Cell: a novel indexing algorithm for routine tasks and difficult cases10.1107/S0021889802023348 ↗
39. Geometrical ambiguities in the indexing of powder patterns10.1107/S0021889875010710 ↗
40. Polymorph transformation kinetics of Ca3SiO5 with MgO10.1080/01411594.2015.1030746 ↗
41. Polymorphism of tricalcium silicate, the major compound of Portland cement clinker: 2. Modelling alite for Rietveld analysis, an industrial challenge10.1016/j.cemconres.2004.12.004 ↗
42. Polymorphism of tricalcium silicate, the major compound of Portland cement clinker: 1. Structural data: review and unified analysis10.1016/j.cemconres.2004.12.003 ↗
43. Hydration mechanism of reactive and passive dicalcium silicate polymorphs from molecular simulations10.1021/acs.jpcc.5b05257 ↗
44. Polymorphism of tricalcium silicate in Portland cement: a fast visual identification of structure and superstructure, powder diffraction
45. A profile-fitting procedure for analysis of broadened X-ray diffraction peaks. I. Methodology10.1107/S0021889888006612 ↗
46. First-principle calculations of the cohesive energy and the electronic properties of PbTiO310.1016/j.physb.2006.10.013 ↗
47. The characterization, stability, and reactivity of synthetic calcium silicate surfaces from first principles10.1021/jp408325f ↗
48. Density functional approach to the frontier-electron theory of chemical reactivity10.1021/ja00326a036 ↗
49. Structural, mechanical, and reactivity properties of tricalcium aluminate using first-principles calculations10.1111/j.1551-2916.2009.02963.x ↗
50. Theoretical study of the surface reactivity of alkaline earth oxides: local density of states evaluation of the local softness10.1063/1.2819239 ↗
51. Spatially resolved quantification of the surface reactivity of solid catalysts10.1002/anie.201601824 ↗
52. Density functional theory simulation of the adsorption of sulphur multilayers on Au(1 0 0)10.1039/C6CP04736J ↗
53. Energy band gap engineering in borate ultraviolet nonlinear optical crystals: ab initio studies
54. Engineering half-Heusler thermoelectric materials using Zintl chemistry10.1038/natrevmats.2016.32 ↗
55. View of lone electron pairs and their role in structural chemistry10.1021/jp203242m ↗
56. Sun · 2014
57. Bonded-atom fragments for describing molecular charge densities10.1007/BF00549096 ↗
58. Are the Hirshfeld and Mulliken population analysis schemes consistent with chemical intuition?10.1002/qua.21901 ↗
59. Atomic charges, dipole moments, and Fukui functions using the Hirshfeld partitioning of the electron density10.1002/jcc.10067 ↗
60. Xiaodong · 2016
61. Research review of cement clinker chemistry10.1016/j.cemconres.2015.05.018 ↗
62. Understanding the reactivity of clinker phases at the atomic scale
63. Electronic origin of doping-induced enhancements of reactivity: case study of tricalcium silicate10.1021/acs.jpcc.5b08286 ↗
64. Structural modulations in monoclinic tricalcium silicate solid solutions doped with zinc oxide, M(I), M(II), and M(III)10.1111/j.1151-2916.2002.tb00106.x ↗
65. Polymorphism and hydration of tricalcium silicate doped with ZnO10.1111/j.1151-2916.1983.tb09956.x ↗
66. Influence of barium adding on composition and performance of alite-rich Portland cement clinker
67. Early hydration of tricalcium silicate III. Control of the induction period10.1016/0008-8846(81)90035-1 ↗
68. The effect of cupric oxide and cuprous oxide on the hydration properties of tricalcium silicate