journal article·2019-10

Effects of hauling time on self-consolidating mortars containing metakaolin and natural zeolite

Ali Sadrmomtazi, Zahra Noorollahi, Behzad Tahmouresi, Ashkan Saradar

Publisher page

Abstract

Abstract Concrete should preserve its adhesion property and workability during the process of transportation to the construction site so that no sign of instability (e.g., bleeding and segregation of aggregates) takes place in concrete. In some cases, long-time mixing process of concrete in truck mixers and the imported energy caused by them inside this system may lead to workability loss or dynamic instability (as the essential factors affecting mechanical properties and durability) in the concrete, and this issue is deemed more important in self-consolidating concrete (SCC) that contains chemical and mineral additives. This study investigated the effect of hauling time and pozzolanic minerals on the fluidity, viscosity, stability, and compressive strength of self-consolidating mortars (SCMs). Therefore, 16 mix designs were totally made as binary and ternary mixtures, including metakaolin (MK) and natural zeolite (NZ), and were subjected to the prolonged mixing time (8, 30, 60, 90, 120, and 150 min). The results showed that when the hauling time increased up to a certain level, which is called stabilization time (the shortest mixing time that has been considered to be 30 min in this study), the fluidity and viscosity of mixtures increased and decreased, respectively. However, by prolonging the hauling time up to 150 min, the workability of binary and ternary mixtures will be reduced to 64% and 68%, respectively. Moreover, dynamic segregation resistance in all ternary mixtures was considered in a stable workability region after mixing for 90 min, while all mixtures were subject to high viscosity and high accumulation (at the center of mixture) at intervals of 120 min and 150 min. Moreover, when the hauling time increases up to 150 min, the compressive strength is reduced in binary mixtures with MK and NZ contents maximally to 54% and 57%, and this rate is equal to 67% in ternary mixtures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Engineering and microstructural assessment of fibre-reinforced self-compacting concrete containing recycled coarse aggregate10.1016/j.jclepro.2017.09.070 ↗
2. Experimental observations and SVM-based prediction of properties of polypropylene fibres reinforced self-compacting composites incorporating nano-CuO10.1016/j.conbuildmat.2017.03.124 ↗
3. Effect of nano-CuO and fly ash on the properties of self-compacting mortar10.1016/j.conbuildmat.2015.07.063 ↗
4. Optimization performance of high volume fly ash self-consolidating mixtures with hydrated lime (mortar component), special
5. Influence of silica fume and class f fly ash on mechanical and rheological properties and freeze-thaw durability of self-compacting mortars10.1061/(ASCE)CR.1943-5495.0000167 ↗
6. Effect of mixture design parameters on segregation of self-consolidating concrete
7. Microstructure and durability properties of cement mortars containing nano-TiO2 and rice husk ash10.1016/j.conbuildmat.2016.03.136 ↗
8. Combined effects of metakaolin, rice husk ash, and polypropylene fiber on the engineering properties and microstructure of mortar10.1061/(ASCE)MT.1943-5533.0001867 ↗
9. P.K. Mehta, Concrete. Structure, properties and materials, (1986).
10. A.M. Neville, J.J. Brooks, Concrete technology, 1987.
11. Rheological properties of mortars for self-compacting concrete
12. Effects of natural zeolite on the fresh and hardened properties of self-compacted concrete10.1016/j.conbuildmat.2013.05.097 ↗
13. Influence of hauling time on fresh properties of self-consolidating concrete
14. Influence of fly ash and silica fume on the consistency retention and compressive strength of concrete subjected to prolonged agitating10.1016/j.conbuildmat.2010.09.024 ↗
15. Effects of retempering on consistency and compressive strength of concrete subjected to prolonged mixing10.1016/S0008-8846(01)00699-8 ↗
16. Effects of hauling time on air-entrained self-consolidating concrete
17. Coupled effects of high temperature, prolonged mixing time, and chemical admixtures on rheology of fresh concrete
18. Effect of mineral admixtures on fluidity and stability of self-consolidating mortar subjected to prolonged mixing time10.1016/j.conbuildmat.2012.11.108 ↗
19. Theoretical analysis of time-dependence and thixotropy of fluidity for high fluidity concrete10.1061/(ASCE)0899-1561(2004)16:3(247) ↗
20. The effect of fly ash and limestone fillers on the viscosity and compressive strength of self-compacting repair mortars10.1016/j.cemconres.2006.04.002 ↗
21. Hassan · 2010 · 103
22. Guidelines for self-compacting concrete, London, UK
23. Effect of SnO2, ZrO2, and CaCO3 nanoparticles on water transport and durability properties of self-compacting mortar containing fly ash: experimental observations and ANFIS predictions10.1016/j.conbuildmat.2017.10.067 ↗
24. Properties of mortar for self-compacting concrete
25. 150, Standard Specification for Portland Cement”
26. Standard · 2013
27. C. Bibm, E. Ermco, EFNARC, The European Guidelines for Self-Compacting Concrete. Specification, Production and Use (2005).
28. From mini-cone test to Abrams cone test: measurement of cement-based materials yield stress using slump tests10.1016/j.cemconres.2004.07.032 ↗
29. Reproducible mini-slump test procedure for measuring the yield stress of cementitious pastes10.1617/s11527-017-1103-x ↗
30. ASTM‐C109, C109/C109M‐13 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2‐in. or [50‐mm] Cube Specimens).
31. Properties of self-compacting mortars with binary and ternary cementitious blends of fly ash and metakaolin10.1617/s11527-007-9345-7 ↗
32. The effect of chemical admixtures and mineral additives on the properties of self-compacting mortars10.1016/j.cemconcomp.2005.12.003 ↗
33. Proposed report: use of natural pozzolans in concrete
34. Effects of silica fume on mechanical strength and microstructure of basalt fiber reinforced cementitious composites10.1016/j.conbuildmat.2017.11.159 ↗
35. Effect of fly ash and silica fume on transition zone, pore structure and permeability of concrete
36. Hoop stress-strain in fiber-reinforced cementitious composite thin-walled cylindrical shells10.1061/(ASCE)MT.1943-5533.0002428 ↗
37. Effect of materials proportion on rheology and mechanical strength and microstructure of ultra-high performance concrete10.1016/j.conbuildmat.2018.08.070 ↗
38. Admixtures used to enhance placing characteristics of concrete10.1016/S0958-9465(98)00071-7 ↗
39. Mixing of high performance concrete: effect of concrete composition and mixing intensity on mixing time10.1617/s11527-009-9494-y ↗
40. Role of water film thickness in rheology of CSF mortar10.1016/j.cemconcomp.2010.01.005 ↗
41. Improving performance and robustness of SCC by adding supplementary cementitious materials10.1016/j.conbuildmat.2010.04.030 ↗
42. Image-processing technology to evaluate static segregation resistance of hardened self-consolidating concrete10.3141/2020-01 ↗