journal article·2019-10Open access

A new durability assessment methodology of thermal mortars applied in multilayer rendering systems

J. Maia, Nuno M.M. Ramos, R. Veiga

Abstract

Abstract The increase of the thermal resistance of building envelopes is a result from the growing demand of energy efficiency. Several new materials and systems emerged in recent years as an answer to that growing need. Thermal mortars applied in thermal rendering systems are an example of how the research community and the building industry try to tackle that challenge. A gap in the durability assessment of thermal rendering systems can however be observed. The existing standardization for the durability assessment of mortars does not allow a consistent evaluation of thermal mortars, especially in multilayer systems. As such, the main goal of the present work consists in proposing a durability assessment methodology of thermal mortars applied as multilayer systems. Accelerated ageing cycles, directly applicable to thermal mortars, were developed through numerical simulation, taking into account material properties, climatic conditions and consequent degradation mechanisms to which the system is subjected. A theoretical methodology for the determination of heat-cold cycles that can represent specific climatic conditions was developed. The implementation of the developed accelerated ageing cycles and the obtained experimental results contributed to the definition of a new durability assessment methodology. This methodology defines the accelerated ageing cycles that should be performed in each climate zone, representative of the main degradation mechanisms. One of the major advantages is the temperature adaption of the accelerated ageing cycles to the climatic conditions. The new methodology contributes to the evaluation of new solutions, during their development stage, and to their adequacy for specific climatic conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Building materials and conservation · Hygrothermal properties of building materials · Building Energy and Comfort Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. ISO 15686 Buildings and constructed assets – Service life planning
2. ABCB · 2006
3. Pinheiro · 2006
4. ECEEE · 2018
5. Thermal insulation coatings for façades based on mortars: behaviour and quality evaluation
6. Lightweight mortars containing expanded polystyrene and paper sludge ash10.1016/j.conbuildmat.2014.03.028 ↗
7. The comparison of thermal insulation types of plaster with cement plaster10.1016/j.jclepro.2014.07.042 ↗
8. Cement-cork mortars for thermal bridges correction. Comparison with cement-EPS mortars performance10.1016/j.conbuildmat.2013.08.006 ↗
9. Laboratory tests and potential of thermal insulation plasters10.1016/j.egypro.2015.11.613 ↗
10. Hygrothermal performance of exterior walls covered with aerogel-based insulating rendering10.1016/j.enbuild.2014.07.039 ↗
11. EN 998–1 performance requirements for thermal aerogel-based renders10.1016/j.conbuildmat.2018.05.197 ↗
12. Multi-criteria selection of façade systems based on sustainability criteria10.1016/j.buildenv.2017.05.016 ↗
13. Quantifying environmental effects on cement-rendered facades: a comparison between different degradation indicators10.1016/j.buildenv.2007.10.022 ↗
14. Approaches to testing the durability of materials used in the construction and maintenance of buildings10.1016/S0950-0618(09)90004-6 ↗
15. A review of accelerated test models10.1214/088342306000000321 ↗
16. D. Crowe, A. Feinberg, “Concepts in accelerated testing” in design for reliability. Electronics Handbook Series, ed. J.C. Whitaker. 2001, Boca Raton, USA.
17. Influence of environmental aging on properties of polymeric mortars10.1061/(ASCE)0899-1561(2004)16:5(461) ↗
18. Durability of expanded polystyrene mortars10.1016/j.conbuildmat.2013.04.029 ↗
19. Transfer behaviour and durability of cementitious mortars containing polycarbonate plastic wastes10.1080/19648189.2014.960100 ↗
20. Climatic data analysis to define accelerated ageing for reference service life evaluation
21. EOTA · 1999
22. Durability and resistance to degradation of hemp fibres-based insulating envelopes
23. CEN · 2010
24. CEN · 2002
25. EOTA · 2013
26. Qualitative analysis of promising materials and technologies for the design and evaluation of Climate Adaptive Opaque Façades10.1016/j.buildenv.2018.08.028 ↗
27. Switching from static to adaptable and dynamic building envelopes: a paradigm shift for the energy efficiency in buildings10.3233/FDE-150039 ↗
28. World Map of the Köppen-Geiger climate classification updated10.1127/0941-2948/2006/0130 ↗
29. Thermal and mechanical performance of natural mortar reinforced with date palm fibers for use as insulating materials in building10.1016/j.enbuild.2014.05.032 ↗
30. IBP, WUFI Pro, in WUFI Pro Manual, F.I. Bauphysik, Editor. 2016.
31. LNEC, FE Pa 39 – Test Report of Wall Coatings, in Determination of water absorption under low pressure. 2002: Lisbon.
32. CEN · 2004
33. CEN · 2000
34. CEN · 2002
35. IPMA. Normais Climatológicas. 2019 [cited 2019 18 April]; Available from: https://www.ipma.pt/pt/oclima/normais.clima/.
36. Sá · 2018
37. ISO · 2005
38. Evaluation of the hygrothermal properties of thermal rendering systems10.1016/j.buildenv.2018.08.055 ↗
39. Enhanced surface roughness of organic coatings due to UV-degradation: an unknown source of EIS-artifacts10.1016/S0300-9440(03)00004-3 ↗
40. Analysis of test methods for UV durability predictions of polymer coatings10.1016/0300-9440(94)00525-7 ↗
41. LNEC, FE Pa 43 – Test Report of Wall Coatings, in Mechanical characteristics assessment by ultrasounds measurement. 2010: Lisboa.
42. ASTM · 1997