journal article·2019-10

Analytical model for critical corrosion level of reinforcements to cause the cracking of concrete cover

Kaijian Zhang, Jianzhuang Xiao, Yuxi Zhao, Qingtian Zhang

Publisher page

Abstract

Abstract This paper proposes an analytical model to calculate the critical corrosion level of reinforcements embedded in the concrete. The porous zone, the plasticity and strain softening of concrete were considered. The proposed model was verified by the simulation and test results, and the test validation shows that the predicted critical corrosion level of reinforcements for both natural aggregate concrete (NAC) and recycled aggregate concrete (RAC) based on the proposed model has a relative error lower than 5.0% compared with the test result when the replacement ratio of recycled aggregates is lower than 33.3%. It concludes that the proposed model can be applied to the prediction of the critical corrosion level of reinforcements in both NAC and RAC, and further the analysis of durability of concrete structures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Corrosion and Durability · Infrastructure Maintenance and Monitoring · Recycled Aggregate Concrete Performance

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Reliability of a corroded RC beam based on Bayesian updating of the corrosion model10.1016/j.engstruct.2016.08.003 ↗
2. Coupled carbonation-rust formation-damage modeling and simulation of steel corrosion in 3D mesoscale reinforced concrete10.1016/j.cemconres.2015.04.008 ↗
3. Modeling of corrosion-induced concrete cover cracking: a critical analysis10.1016/j.conbuildmat.2013.01.019 ↗
4. Durability demands related to carbonation induced corrosion for Finnish concrete buildings in changing climate10.1016/j.engstruct.2014.01.032 ↗
5. Some effects of cement and curing upon carbonation and reinforcement corrosion in concrete10.1007/BF02486162 ↗
6. A study of the CEN test method for measurement of the carbonation depth of hardened concrete10.1007/BF02484168 ↗
7. Corrosion products of carbonation induced corrosion in existing reinforced concrete facades10.1016/j.cemconres.2015.07.009 ↗
8. Composition and expansion coefficient of rust based on X-ray diffraction and thermal analysis10.1016/j.corsci.2011.01.007 ↗
9. Modeling the time-to-corrosion cracking in chloride contaminated reinforced concrete structures
10. Corrosion-induced concrete cracking model considering corrosion product-filled paste at the concrete/steel interface10.1016/j.conbuildmat.2016.04.097 ↗
11. Distribution of millscale on corroded steel bars and penetration of steel corrosion products in concrete10.1016/j.corsci.2012.09.014 ↗
12. Analytical modelling of concrete cover cracking caused by corrosion of reinforcement10.1617/s11527-009-9510-2 ↗
13. Models for the propagation phase of reinforcement corrosion – An overview10.1002/maco.200603991 ↗
14. Physical model for steel corrosion in concrete sea structures – Application10.1061/JSDEAG.0005169 ↗
15. Thoft-Christensen · 2000
16. Analysis on the cracking of concrete cover due to rebar corrosion
17. Modeling the amount of steel corrosion at the cracking of concrete cover10.1260/136943306778827556 ↗
18. Cover cracking in reinforced concrete elements due to corrosion10.1080/15732479.2010.505376 ↗
19. Calculation model of corrosion expansion crack time for concrete cover
20. Modelling effects of corrosion on cover cracking and bond in reinforced concrete10.1680/macr.2004.56.4.191 ↗
21. Modeling of time to corrosion-induced cover cracking in reinforced concrete structures10.1016/j.cemconres.2005.06.007 ↗
22. Model for cover cracking due to rebar corrosion in RC structures10.1016/j.engstruct.2005.11.014 ↗
23. Analytical model for time to cover cracking in RC structures due to rebar corrosion10.1016/j.nucengdes.2005.10.011 ↗
24. A model for prediction of time from corrosion initiation to corrosion cracking10.1016/j.cemconcomp.2006.11.004 ↗
25. Factors controlling cracking of concrete affected by reinforcement corrosion10.1007/BF02480466 ↗
26. Cover cracking as a function of bar corrosion: part 1 – Experimental test10.1007/BF02472805 ↗
27. Pressure required to cause cover cracking of concrete due to reinforcement corrosion10.1680/macr.2000.52.6.455 ↗
28. A. Munoz, C. Andrade, A. Torres. Corrosion products pressure needed to crack the concrete cover. In: C.U. Grosse. (Ed.). Springer-Verlag Berlin, Berlin, 2007, 359–370.10.1007/978-3-540-72448-3_36 ↗
29. Cover cracking as a function of rebar corrosion: part 2—Numerical model10.1007/BF02472864 ↗
30. Modeling cover-cracking due to reinforcement corrosion in RC structures
31. Experimental and numerical investigation of corrosion-induced cover cracking in reinforced concrete structures10.1061/(ASCE)0733-9445(2009)135:4(376) ↗
32. Finite element analysis of the effects of radial expansion of corroded reinforcement10.1016/j.compstruc.2006.02.012 ↗
33. A double-cylinder model incorporating confinement effects for the analysis of corrosion-caused cover cracking in reinforced concrete structures10.1016/j.corsci.2015.07.009 ↗
34. Damage analysis and cracking model of reinforced concrete structures with rebar corrosion10.1016/j.corsci.2011.06.018 ↗
35. Analytical model for corrosion-induced crack width in reinforced concrete structures
36. Measurement of loss of steel from reinforcing bars in concrete using linear polarisation resistance measurements10.1016/j.ndteint.2003.11.003 ↗
37. Crack shape and rust distribution in corrosion-induced cracking concrete10.1016/j.corsci.2011.11.002 ↗
38. Steel corrosion and corrosion-induced cracking in recycled aggregate concrete10.1016/j.corsci.2014.04.028 ↗
39. Yu · 2011
40. Unified plane-strain slip line field theory system
41. GB 50010. Code for Design of Concrete Structures. China Architecture and Building Press, Beijing, 2010. (in Chinese).
42. CEB-FIP, Model Code. Design Code. Comite Euro International du Beton 1990.
43. The unified limit load solution of fiber reinforcement concrete cylinder considering the strain softening of materials
44. Development of the corrosion-filled paste and corrosion layer at the steel/concrete interface10.1016/j.corsci.2014.06.032 ↗
45. ACI Committee, American Concrete Institute, and International Organization for Standardization. Building code requirements for structural concrete (ACI 318-08) and commentary. American Concrete Institute, 2008.
46. Finite element modelling of reinforcement with bond10.1016/j.compstruc.2006.04.010 ↗
47. Experimental study of the modulus of steel corrosion in a concrete port10.1016/j.corsci.2011.11.004 ↗
48. Critical thickness of rust layer at inner and out surface cracking of concrete cover in reinforced concrete structures10.1016/j.corsci.2012.03.018 ↗