Failure mechanism of different types of shotcrete based on modified Weibull distribution model
Source abstract
Abstract
Abstract Many scholars have used the Weibull distribution model to analyze the damage of shotcrete, but it cannot entirely describe the whole process of failure, especially after the peak stress. In this paper, based on the Weibull distribution model modified by the writer with the aim of exploring different mechanical properties of three types of shotcrete, the acoustic emission (AE) technique is used to carry out uniaxial compression tests on different shotcrete, and the failure mechanism of different shotcrete is analyzed according to the AE energy value and cumulative hit counts under loads. The experimental results are consistent with the damage mechanism quantitatively described by the modified Weibull distribution model. This damage model with fewer parameters and simple form, which can quantitatively described the whole process of specimens, including post-peak stress, from the beginning of loading to the complete failure. The research results thus provide a basis for quantitatively describing the damage of shotcrete or rock, and provide a reference for the selection of shotcrete in different engineering environments.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Rock Mechanics and Modeling · Concrete and Cement Materials Research · Geophysical Methods and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Thomas · 2012
2. Hybrid method for quantification of stress states in shotcrete tunnel shells: combination of 3D in situ displacement measurements and thermochemoplastic material law10.1016/S0045-7949(01)00057-8 ↗
3. Effects of fibers on expansive shotcrete mixtures consisting of calcium sulfoaluminate cement, ordinary Portland cement, and calcium sulfate10.1016/j.jrmge.2017.12.001 ↗
4. Accelerating admixtures for shotcrete10.1016/S0958-9465(98)80007-3 ↗
5. A case history: effect of moisture on the setting of a Portland cement reacting with an alkali-free accelerator10.1016/j.cemconres.2007.02.020 ↗
6. Enhanced long-term strength and durability of shotcrete with high-strength C12A7 mineral-based accelerator10.1016/j.cemconres.2015.05.020 ↗
7. Enhancement of the tensile strengths of rock and shotcrete by thin spray-on liners10.1016/j.tust.2015.05.013 ↗
8. Air-void structure, strength, and permeability of wet-mix shotcrete before and after shotcreting operation: the influences of silica fume and air-entraining agent10.1016/j.cemconcomp.2016.03.012 ↗
9. Experimental study on debonding of shotcrete with acoustic emission during freezing and thawing cycle10.1016/j.coldregions.2014.11.014 ↗
10. Damage layer coarseness and formation mechanism of shotcrete with and without steel fiber under sulfate corrosion of dry–wet cycles by ultrasound plane testing method10.1016/j.conbuildmat.2016.06.146 ↗
11. High-temperature behavior of structural and non-structural shotcretes10.1016/j.cemconcomp.2016.06.009 ↗
12. Influence of surrounding rock temperature on mechanical property and pore structure of concrete for shotcrete use in a hot-dry environment of high-temperature geothermal tunnel10.1016/j.conbuildmat.2019.02.125 ↗
13. Durability of shotcrete for underground support-review and update10.1016/j.conbuildmat.2018.12.151 ↗
14. Experimental study on mechanical property and pore structure of concrete for shotcrete use in a hot-dry environment of high geothermal tunnels10.1016/j.conbuildmat.2018.03.191 ↗
15. Effect of temperature and humidity on the adhesion strength and damage mechanism of shotcrete-surrounded rock10.1016/j.conbuildmat.2016.08.126 ↗
16. Mehta · 2014
17. Properties of wet-mixed fiber reinforced shotcrete and fiber reinforced concrete with similar composition10.1016/j.cemconres.2004.05.033 ↗
18. A new testing configuration for shrinkage cracking of shotcrete and fiber reinforced shotcrete10.1016/j.cemconres.2005.11.018 ↗
19. Bonding behavior of CFRP grid-concrete with PCM shotcrete10.1016/j.engstruct.2018.04.059 ↗
20. Investigation of restrained shrinkage cracking in partially fixed shotcrete linings10.1016/j.tust.2014.02.011 ↗
21. Experimental and mechanical performance of shotcrete made with nanomaterials and fiber reinforcement10.1016/j.conbuildmat.2017.12.199 ↗
22. Performance of shotcrete containing amorphous fibers for tunnel applications10.1016/j.tust.2017.01.012 ↗
23. Evolution and propagation of material defects and Kaiser effect function
24. Heping · 1990
25. Mechanical and fatigue performance of rubber concrete10.1016/j.conbuildmat.2013.05.055 ↗
26. Failure probability prediction of concrete components10.1016/S0008-8846(03)00111-X ↗
27. Twofold normalization of the cyclic creep curve of plain and steel-fiber reinforced concrete and its application to predict fatigue failure10.1016/j.ijfatigue.2018.11.021 ↗
28. Studying the dynamic damage failure of concrete based on acoustic emission10.1016/j.conbuildmat.2017.05.054 ↗
29. Reliability model for switchgear failure analysis applied to ageing10.1016/j.engfailanal.2019.03.004 ↗
30. Converting data into knowledge for preventing failures in power transformers10.1016/j.engfailanal.2019.03.027 ↗
31. Reliability, availability and maintainability study for failure analysis in series capacitor bank10.1016/j.engfailanal.2018.01.008 ↗
32. Mechanical behavior and Weibull statistics based failure analysis of vanadium flow battery stacks10.1016/j.jpowsour.2018.11.060 ↗
33. Prospective applications of AE measurements to infra-dock of concrete structures10.1016/j.conbuildmat.2017.09.145 ↗
34. Study on the AE characteristics of fracture process of mortar, concrete and steel-fiber-reinforced concrete beams10.1016/S0008-8846(00)00358-6 ↗
35. GB/T 50152-2012, Standard for test method of concrete structures, Chinese Standard Press, 2012.
36. GB/T 50086-2015, Technical code for engineering of ground anchorages and shotcrete support, Chinese Standard Press, 2015.
37. GB/T50081 Standard for test method of mechanical properties on ordinary concrete, Chinese Standard Press, 2002.
38. Microscopic investigations on the air-void characteristics of wet-mix shotcrete
39. Investigating and optimizing the mix proportion of pumping wet-mix shotcrete with polypropylene fiber10.1016/j.conbuildmat.2017.05.169 ↗
40. Image processing and machine learning to investigate fibre distribution on fibre-reinforced shotcrete round determinate panels10.1016/j.conbuildmat.2018.09.141 ↗
41. Effects of mineral admixtures and steel fiber on rheology, strength, and chloride ion penetration resistance characteristics of wet-mix shotcrete mixtures containing crushed aggregates10.1016/j.conbuildmat.2017.03.093 ↗
42. Healing and simultaneous ultrasonic monitoring of cracks in concrete10.1016/j.mtcomm.2018.10.022 ↗
43. Influence of transverse cracks and interfacial damage on corrosion of steel in concrete with and without fiber hybridization10.1016/j.corsci.2019.03.020 ↗
44. Bond strength of reinforcing bars encased with shotcrete10.1016/j.conbuildmat.2018.02.218 ↗
45. Mechanisms of cement hydration10.1016/j.cemconres.2010.09.011 ↗
46. Experimental study of compressive behavior of polypropylene-fiber-reinforced and polypropylene-fiber-fabric-reinforced concrete10.1016/j.conbuildmat.2018.11.042 ↗
47. Durability of dry-mix shotcrete using supplementary cementitious materials10.1016/j.conbuildmat.2018.09.107 ↗
48. Nonlinear ultrasonic test of concrete cubes with induced crack10.1016/j.ultras.2019.04.002 ↗
49. Nilson · 2003
50. Comparative evaluation of steel mesh, steel fibre and high-performance polypropylene fibre reinforced shotcrete in panel test10.1016/j.cemconres.2003.12.024 ↗
51. Shear transfer across cracks in steel fibre reinforced concrete10.1016/j.engstruct.2019.02.027 ↗