journal article·2019-10

Assessment of nano-FeTiO3/non crystalline silica cold galvanizing composite coating as a duplex corrosion guard system for steel electricity transmission towers in severe aggressive media

M.I. Abdou, A.M. Fadl

Publisher page

Abstract

Abstract The cold galvanizing duplex system is considered a vital paradigm for corrosion mitigation of steel electricity transmission towers (SETTs). To boost this concept, ilmenite nanoparticles (FeTiO 3 NPs) were obtained by a physical ball milling method and fabricated non crystalline silica grains were processed to compose nano-FeTiO 3 /non crystalline silica (NI/NCS) particles as an anticorrosion modifier for cold galvanizing coating (CGC). Characterizations for the investigated FeTiO 3 NPs and non crystalline silica grains were made by X-ray diffraction (XRD) and dynamic light scattering (DLS) techniques. The nano-features of FeTiO 3 NPs were demonstrated by transmission electron microscope (TEM) study. Different one-component cold galvanizing coating formulations were prepared using various uniformly dispersing amounts of the processed NI/NCS particles to construct nanocomposite coatings for C-steel surface applications. The duplex anti-corrosion performance properties of surface modified nanocomposite cold galvanizing coated films against unmodified conventional coating in oil-wells aggressive formation water solution have been studied by the electrochemical impedance spectroscopy (EIS) technique. For supporting the protective behavior of these nanocomposite coatings, salt spray accelerated corrosion test was performed. The corrosion protection performance of the investigated modified nanocomposite coated film compared to the unmodified conventional one on the C-steel surface in severe aggressive formation water medium was surveyed by scanning electron microscopy (SEM) and energy dispersive analysis of X-rays (EDX) investigations. The results of this consideration assured that the surface modified NI/NCS cold galvanizing coating displayed a duplex corrosion mitigation behavior on the C-steel surface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Concrete Corrosion and Durability · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. International Finance Corporation (IFC), Environmental, Health, and Safety Guidelines for electric power transmission and distribution, April, 2007. Pp. 20–23.
2. Influence of surface modified nanoilmenite/amorphous silica composite particles on the thermal stability of cold galvanizing coating10.1016/j.ejpe.2017.02.002 ↗
3. Assessing galvanized steel power transmission poles and towers for corrosion
4. EIS characterization of new zinc-rich powder coatings10.1016/j.porgcoat.2006.09.005 ↗
5. Effects of particle sizes and shapes of size metal on the properties of anticorrosion coatings10.1016/S0300-9440(03)00022-5 ↗
6. Zinc-rich epoxy primers based on lamellar zinc dust10.1007/BF02692668 ↗
7. P.M. Ajayan, L.S. Schadler, P.V. Braun, Nanocomposite Science and Technology, Wiley-VCH, ISBN: 978-3-527-30359-52003, 2003. Pp. 236.
8. Enhancing coating functionality using nanoscience and nanotechnology10.1016/S0300-9440(03)00127-9 ↗
9. Influence of Egyptian nanoilmenite/amorphous silica composite particles on the electrochemical and mechanical properties of cold galvanizing formulation coatings10.1016/j.apt.2017.11.024 ↗
10. FTIR studies of the curing reactions of palm oil alkyd-melamine enamels10.1002/app.1336 ↗
11. Effect of nano clay on corrosion protection of zinc-rich epoxy coatings on steel 3710.1016/j.jmst.2016.08.017 ↗
12. Characterization of the protective performance of reinforced with nanometer-sized TiO2 and SiO210.1016/j.porgcoat.2007.11.003 ↗
13. Formulation and evaluation of nanostructured polymeric coatings for corrosion protection10.1016/j.surfcoat.2007.05.090 ↗
14. Nanocomposites of TiO2 and siloxane copolymers as environmentally safe flame-retardant materials10.1080/10601320802380208 ↗
15. Physico-mechanical and electrochemical corrosion behavior of soya alkyd/Fe2O3nanocomposite coatings10.1039/C3RA48068B ↗
16. Electrochemical impedance spectroscopy (EIS) study of nano-alumina modified alkyd based waterborne coatings10.1016/j.porgcoat.2011.11.020 ↗
17. Effect of nano-Al2O3 particles on the corrosion behavior of alkyd based waterborne coatings10.1007/s11998-008-9127-3 ↗
18. Study on the electrochemical behavior of nano-ZnO alkyd-based waterborne coatings10.1002/app.30276 ↗
19. Method for preparation epoxy lotion from ilmenite ore to protect steel structures from corrosion
20. Influence of ilmenite ore particles as pigment on the anticorrosion and mechanical performance properties of polyamine cured epoxy for internal coating of gas transmission pipelines10.1016/j.ejpe.2017.07.005 ↗
21. Influence of surface modified ilmenite/melamine formaldehyde composite on the anti-corrosion and mechanical properties of conventional polyamine cured epoxy for internal coating of gas and oil transmission pipelines10.1016/j.porgcoat.2017.08.003 ↗
22. Method for preparation of synthetic silica from white sand for surface blasting process of steel structures
23. Al-Sabagh · RJPBCS · 2017 · 8 · 2064
24. Mechanism of cathodic protection of zinc-rich paints by electro-chemical impedance spectroscopy
25. Corrosion inhibition performance of polypyrrole Al flake composite coatings for Al alloys10.1016/j.corsci.2012.12.019 ↗
26. The synergistic effect of polyamidoamine dendrimers and sodium silicate on the corrosion of carbon steel in soft water10.1016/j.corsci.2014.10.054 ↗
27. Studying phosphate corrosion inhibition at the cut edge of galvanized steel using the SVET and EIS10.1016/j.porgcoat.2010.04.022 ↗
28. Studying the corrosion inhibition of some prepared nonionic surfactants based on 3-(4-hydroxyphenyl) propanoic acid and estimating the influence of silver nanoparticles on the surface parameters influence of silver nanoparticles on the surface parameters10.1016/j.molliq.2017.11.052 ↗
29. Scale and corrosion inhibition performance of the newly synthesized anionic surfactant in desalination plants: Experimental, and theoretical investigations10.1016/j.desal.2018.01.036 ↗
30. Nanosilicon dioxide/o-phenylenediamine hybrid composite as a modifier for steel paints10.1016/j.porgcoat.2013.01.009 ↗
31. Studying the effects of micro and nano sized ZnO particles on the corrosion resistance and deterioration behavior of an epoxy-polyamide coating on hot-dip galvanized steel10.1016/j.porgcoat.2011.03.026 ↗
32. Hydrophobic benzoxazine-cured epoxy coatings for corrosion protection10.1016/j.porgcoat.2013.03.013 ↗
33. A facile route of making silica nanoparticles-covered graphene oxide nanohybrids (SiO2-GO); fabrication of SiO2-GO/epoxy composite coating with superior barrier and corrosion protection performance10.1016/j.cej.2016.06.028 ↗
34. Characterisation of the barrier properties of different paint systems–Part I. Experimental set-up and ideal Fickian diffusion10.1016/S0300-9440(99)00030-2 ↗
35. Electrochemical behavior of zinc-rich epoxy paints in 3% NaCl solution10.1016/0013-4686(96)00021-7 ↗
36. Behavior in seawater of zinc-base coatings on aluminum alloy10.5006/1.3299825 ↗
37. Nanotechnology-anew prospective in organic coating-review
38. Cathodic delamination: quantification of ionic transport rates along coating-steel interfaces10.1016/j.porgcoat.2009.10.011 ↗
39. Determination of the oxygen reduction products on ASTM A516 steel during cathodic protection10.1023/A:1003451418717 ↗
40. Intermediate products of atmospheric oxygen reduction and the integrity of metal-organic coating interface10.1016/0022-0728(92)80443-8 ↗
41. Sofian · 2014
42. Effects of P/B on the properties of anticorrosive coatings with different particle size10.1016/j.porgcoat.2005.01.003 ↗
43. Effects of particle sizes and shapes of zinc metal on the properties of anticorrosive coatings10.1016/S0300-9440(03)00022-5 ↗
44. Effect of nanopigments on the corrosion resistance of alkyd coatings
45. Predicting the corrosion rate of steel in cathodically protected concrete using potential shift10.1016/j.conbuildmat.2018.10.153 ↗
46. Studying the corrosion mitigation behavior and chemical durability of FeTiO3/melamine formaldehyde epoxy composite coating for steel internal lining applications10.1016/j.porgcoat.2019.04.072 ↗
47. Influence of surface pretreatment on the corrosion resistance of cold-sprayed nickel coatings in acidic chloride solution10.1007/s11665-018-3298-6 ↗
48. Optimisation of interface roughness and coating thickness to maximize coating—Substrate adhesion—A failure prediction and reliability assessment modelling10.1080/01694243.2015.1026870 ↗
49. The adhesion performance of epoxy coating on AA6063 treated in Ti/Zr/V based solution10.1016/j.apsusc.2016.05.083 ↗
50. Fracture behaviors of nanowire-coated metal/polymer systems under mode-i loading condition10.1016/j.actamat.2004.08.040 ↗
51. On the relation between adherence of a paint film and corrosion protection10.1016/0013-4686(93)80331-S ↗
52. Adhesion enhancement in waterborne acrylic latex binders synthesized with phosphate methacrylate monomers10.1016/j.porgcoat.2007.09.012 ↗
53. ASTM E 87-45, Annual Book of ASTM standard, ASTM, Philadelphia, PA, 11, 1986 (125s).
54. ZephirPanosian, Evaluating Zn, Al and Al–Zn coatings on carbon steel in a special atmosphere10.1016/j.conbuildmat.2008.07.002 ↗
55. Weight loss, polarization, electrochemical impedance spectroscopy, SEM and EDX studies of the corrosion inhibition of copper in aerated NaCl solutions10.1007/s10800-005-9055-1 ↗