Effect of design parameters on the properties of ultra-high performance fibre-reinforced concrete in the fresh state
Source abstract
Abstract
Abstract The properties of Ultra-High Performance Fibre-Reinforced Concrete (UHPFRC) in the fresh state were studied and analysed. The design parameters were the nature of the mineral admixture (metakaolin or silica fume), the fibre content and the paste content. Workability tests (mini slump-flow and mini L-box) were carried out immediately after mixing and after different resting times. Rheological tests were performed in order to evaluate the shear-dependent properties as well as the time-dependent ones. Workability results showed that the self-compacting ability targeted at the end of mixing was maintained up to 20 min after mixing for all UHPFRCs. Highlighting some significant relationships between workability measurements and rheological parameters enabled the flow properties to be analysed depending on the mixture composition. In particular, at given fibre and paste contents, UHPFRC incorporating metakaolin displayed higher plastic viscosity and structuration rate than UHPFRC containing silica fume. Furthermore, even if designed with lower fibre content or lower paste content, UHPFRC made with metakaolin was always more thixotropic than UHPFRC with silica fume. For the case of UHPFRC, having the highest metakaolin and fibre contents, a practical solution is proposed to prevent distinct-layer casting from occurring in the precast factory.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Composition of reactive powder concretes10.1016/0008-8846(95)00144-2 ↗
2. Bending and compressive behaviours of a new cement composite10.1016/j.cemconres.2004.05.043 ↗
3. NF P18-470 Concrete – Ultra-high performance fibre-reinforced concrete – Specifications, performance, production and conformity, 2016.
4. NF P 18-710, National addition to Eurocode 2 – Design of concrete structures: specific rules for Ultra-High Performance Fibre-Reinforced Concrete (UHPFRC), 2016.
5. Critical review on eco-efficient ultra high performance concrete enhanced with nano-materials10.1016/j.conbuildmat.2015.10.066 ↗
6. A review on ultra high performance concrete: Part I. Raw materials and mixture design10.1016/j.conbuildmat.2015.10.088 ↗
7. Influence of cement type and mixing pressure on air content, rheology and mechanical properties of UHPC10.1016/j.conbuildmat.2012.12.050 ↗
8. A thixotropy model for fresh fluid concretes: theory, validation and applications10.1016/j.cemconres.2006.05.025 ↗
9. Distinct-layer casting of SCC: the mechanical consequences of thixotropy10.1016/j.cemconres.2007.09.023 ↗
10. Thixotropic behavior of self-compacting concrete with different mineral admixtures10.1016/j.conbuildmat.2013.10.025 ↗
11. Structural build-up of rigid fiber reinforced cement-based materials10.1617/s11527-012-9997-9 ↗
12. J. Ma, M. Orgass, F. Dehn, D. Schmidt, N.V. Tue, Comparative investigations on ultra-high performance concrete with and without coarse aggregates, in: Proceedings of international symposium on ultra high performance concrete, Germany, 2004, pp. 205–212.
13. Predicting the flexural strength of steel and polypropylene fibre-reinforced cement-based beams10.1016/0010-4361(77)90028-3 ↗
14. Mechanical behaviour of metal-fibre reinforced concretes10.1016/0958-9465(92)90034-S ↗
15. Grünewald · 2004
16. Fresh and hardened properties of self-consolidating fibre-reinforced concrete
17. Rheology of fibre reinforced cementitious materials: classification and prediction10.1016/j.cemconres.2009.08.032 ↗
18. Assessment of thixotropy of flowable and self-consolidating concrete
19. P. Billberg, Form pressure generated by self-compacting concrete, in: Proceedings of the 3rd international RILEM symposium on self-compacting concrete, RILEM PRO33 Reykjavik, Iceland, 2003, pp. 271–280.
20. Extrudable reactive powder concretes: hydration, shrinkage and transfer properties10.1080/19648189.2012.681961 ↗
21. Characterization of the granular packing and percolation threshold of reactive powder concrete10.1016/S0008-8846(00)00300-8 ↗
22. Metakaolin in the formulation of UHPC10.1016/j.conbuildmat.2008.02.018 ↗
23. NF EN 197-1, Standard: Cement – Partie 1: Composition, specifications and conformity criteria for common cements, 2012.
24. Packing density of cementitious materials: part 1-measurement using a wet packing method10.1617/s11527-007-9274-5 ↗
25. Measurement of the absorption of water of the mineral admixtures in concrete by evaporometry10.1007/BF02481568 ↗
26. NF EN 206, Standard: Concrete – Specification, performance, production and conformity, 2014.
27. Low cost ultra-high performance fibre reinforced concrete (UHPFRC) with flash metakaolin10.4028/www.scientific.net/KEM.629-630.55 ↗
28. Ultra-high performance concrete with compressive strength exceeding 150 MPa (22 ksi): a simpler way
29. NF EN 12350-7, Testing fresh concrete – Part 7: Air content – Pressure methods, 2012.
30. Mix design and properties assessment of Ultra-High Performance Fibre Reinforced Concrete (UHPFRC)10.1016/j.cemconres.2013.11.002 ↗
31. B. A. Graybeal, Material property characterization of ultra-high performance concrete, 2006, No. FHWA-HRT-06-103.e.
32. Contribution to the study of the fresh concrete rheology
33. NF EN 12350-2, Standard: Tests for fresh concrete – Part 2: Slump test, 2012.
34. Processing the Couette viscometry data using a Bingham approximation in shear rate calculation10.1016/j.jnnfm.2008.01.006 ↗
35. Introduction to the rheometry of complex suspensions
36. Determination of shear rate and viscosity from batch mixer data10.1122/1.551044 ↗
37. Integration approach of the Couette inverse problem of powder type self-compacting concrete in a wide-gap concentric cylinder rheometer10.1016/j.jnnfm.2007.10.003 ↗
38. Constitutive parameter identification: an application of inverse analysis to the flow of cement-based suspensions in the fresh state from synthetic data10.1016/j.jnnfm.2017.01.005 ↗
39. Sheskin · 2004
40. Correlation between yield stress and slump: comparison between numerical simulations and concrete rheometers results10.1617/s11527-005-9035-2 ↗
41. Effect of metakaolin and silica fume on rheology of self-consolidating concrete
42. Ramezanianpour · 2014
43. Fibre reinforcement and rheology of concrete
44. Rheology–a scientific approach to develop self-compacting concrete
45. de Larrard · 1999
46. Rheological characterization of superplasticized cement pastes containing mineral admixtures: consequences on self-compacting concrete design
47. Rheology and mechanical characteristics of self-compacting concrete mixtures containing metakaolin10.1016/j.conbuildmat.2014.04.048 ↗
48. Thixotropic investigation on cement paste: experimental and numerical approach
49. A physical model for the prediction of lateral stress exerted by self-compacting concrete on formwork10.1617/s11527-005-9052-1 ↗
50. P. Billberg, Development of SCC static yield stress at rest and its effect on the lateral form pressure, in: SCC 2005, Combining the Second North American Conference on the Design and Use of Self-Consolidating Concrete and the Fourth International RILEM Symposium on Self-Compacting Concrete, 2005, pp. 583–589.10.1617/2912143624.063 ↗
51. Thixotropy – a review10.1016/S0377-0257(97)00004-9 ↗
52. Time-dependent rheological characteristics of self-consolidating concrete containing various mineral admixtures10.1016/j.conbuildmat.2015.04.015 ↗
53. A. Carneiro, M. Mouret, Flow properties of fluid concretes incorporating or not metakaolin, in: A. Palomo, A. Zaragoza, J.C. Lopez Agui (Eds.), Paper 427, area 7 (properties of fresh and hardened concrete), CD Proceedings of the 13th International Congress on the Chemistry of Cement, Madrid, July 2011, pp. 3–8.
54. Variation of formwork pressure with thixotropy of self-consolidating concrete
55. Effect of section width and casting rate on variations of formwork pressure of self-consolidating concrete10.1007/BF02480577 ↗
56. NF EN 12350-6, Testing fresh concrete – Part 6: Density, 2012.
57. New methodology for designing self-compacting concrete