The effect and mechanism of La2O3 on the anti-ultraviolet aging characteristics of virgin bitumen
Source abstract
Abstract
Abstract Modified bitumen was prepared by adding the rare earth oxide La2O3 to virgin bitumen to improve its anti-ultraviolet aging performance. An ultraviolet aging chamber was used to simulate the ultraviolet aging process of bitumen. Ultraviolet aged and non-aged bitumen were then tested to evaluate the ultraviolet aging degree from both the macro and micro perspectives and to analyze the effect of La2O3 on anti-ultraviolet aging performance. A dynamic shear rheometer, bending beam rheometer, infrared spectrum, and scanning electron microscope were used to conduct these tests. The results showed that, compared with virgin bitumen, the complex shear modulus, creep stiffness, creep rate, and sulfoxide index of 1–3% La2O3 modified bitumen after ultraviolet aging were reduced under the same aging condition. When the La2O3 content was 2%, the modified bitumen aging degree was the lowest, and its ratios of complex shear modulus, creep stiffness and creep rate were 1.26, 1.09, and 0.87 respectively. The sulfoxide index increment was 0.07, while the four corresponding indexes of virgin bitumen were 1.44, 1.11, 0.85 and 0.12. The SEM image analysis showed that the modification of bitumen by La2O3 was a physical modification. La2O3 that is evenly distributed in bitumen can absorb and reflect ultraviolet radiation, reduce the absorption of ultraviolet energy by bitumen molecules, improve the anti-ultraviolet aging performance, and effectively extend the service life of asphalt.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Polymer Science and PVC
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Influence of water and temperature on mechanical properties of selected asphalt pavements10.1617/14317 ↗
2. Influence of thermo-oxidative aging on chemical composition and physical properties of polymer modified bitumens10.1016/j.conbuildmat.2011.06.033 ↗
3. María del Carmen Rubio-Gámez Effect of ageing and temperature on the fatigue behavior of bitumens10.1016/j.matdes.2015.07.076 ↗
4. World Health Organization (WHO) · 2002
5. Analysis of mechanism and time-temperature equivalent effects of asphalt binder in short-term aging10.1016/j.conbuildmat.2019.04.197 ↗
6. Investigation of the flow and self-healing properties of UV aged asphalt binders10.1016/j.conbuildmat.2018.04.109 ↗
7. Modelling of the performance of asphalt pavement using response surface methodology-the kinetics of the aging10.1016/j.buildenv.2005.10.013 ↗
8. Aging degradation of asphalt binder by narrow-band UV radiations with a range of dominant wavelengths10.1016/j.conbuildmat.2019.06.035 ↗
9. X.J. Hu, The weathering of polymer Synthetic materials aging and application. 34(3) 2005 pp. 41–44.
10. Research on Ultra Violet (UV) aging depth of asphalts10.1016/j.conbuildmat.2017.11.047 ↗
11. Mechanism of asphalt binder aging by ultraviolet irradiation and aging resistance by adding carbon black10.1627/jpi.47.266 ↗
12. Influence of surface modification on physical and ultraviolet aging resistance of bitumen containing inorganic nanoparticles10.1016/j.conbuildmat.2015.08.138 ↗
13. UV Blocking by Mg–Zn–Al layered double hydroxides for the protection of asphalt road surfaces10.1021/ie403901n ↗
14. Effect of LDHs on the aging resistance of crumb rubber modified asphalt10.1016/j.conbuildmat.2013.10.040 ↗
15. Field evaluation of LDHs effect on the aging resistance of asphalt concrete after four years of road service10.1016/j.conbuildmat.2019.02.174 ↗
16. Ageing by UV radiation of an elastomer modified bitumen10.1016/j.fuel.2008.02.008 ↗
17. The influence of UV aging of a styrene/butadiene/styrene modified bitumen: comparison between laboratory and on site aging10.1016/j.fuel.2006.11.024 ↗
18. J.Y. Yu, Z.G. Feng, H.L. Zhang (PMB), London: Wood head Polymer modified bitumen: Properties and characterisation. Chapter 9: Ageing of polymer modified bitumen 2011 Publishing Limited.
19. Rheological and aging properties of ultraviolet absorber/styrene-butadiene-styrene-modified bitumens10.1002/app.38505 ↗
20. The physical properties and photostability of bitumen with different ultraviolet absorbers10.1080/10916466.2012.654573 ↗
21. Rheological evaluation of bitumen containing different ultraviolet absorbers10.1016/j.conbuildmat.2011.11.007 ↗
22. Preparation and characterization of polystyrene/titanium dioxide composite particles containing organic ultraviolet-stabilizer groups10.1002/app.25981 ↗
23. Effect of modified carbon black on the UV/IR screening ability of poly (ethylene terephthalate) transparent films10.1002/pc.21050 ↗
24. Rare earth compounds modified carbon black filled powdered natural rubber: preparation, morphology and properties10.1002/app.27462 ↗
25. Influence of lanthanum stearate as a co-stabilizer on stabilization efficiency of calcium/zinc stabilizers to polyvinyl chloride10.1016/j.polymdegradstab.2009.01.024 ↗
26. Effects of MgAlCe-CO3 layered double hydroxides on the thermal stability of PVC resin10.1002/app.32807 ↗
27. Glass formation in the La2O3-Ga2S3-Pr2O3 ternary system10.1007/s10720-005-0017-9 ↗
28. ASTM E 490-00a, Solar Constant and Zero Air Mass Solar Spectral Irradiance Tables.
29. UV and thermal aging of pure bitumen-comparison between laboratory simulation and natural exposure aging10.1080/14680629.2008.9690161 ↗
30. Morphology of asphalt mixture rheological master curves10.1061/(ASCE)MT.1943-5533.0000024 ↗
31. Research on the aging and rejuvenation mechanisms of asphalt using atomic force microscopy10.1016/j.conbuildmat.2018.02.008 ↗
32. Laboratory investigation of dynamic rheological properties of tourmaline modified bitumen10.1016/j.conbuildmat.2014.12.105 ↗
33. Effects of aging on rheological properties of asphalt materials and asphalt-filler interaction ability10.1016/j.conbuildmat.2018.02.171 ↗
34. New technique for measuring low temperature properties of asphalt binders with small amounts of material10.3141/2179-03 ↗
35. BBR and DSR testing of aging properties of polymer and polyphosphoric acid-modified asphalt binders10.1061/(ASCE)MT.1943-5533.0002440 ↗
36. The performance of asphalt binder with trichloroethylene: improving the efficiency of using reclaimed asphalt pavement10.1016/j.jclepro.2019.05.164 ↗
37. Effects of thermal oxidative ageing on dynamic viscosity, TG/DTG, DTA and FTIR of SBS- and SBS/sulfur-modified asphalts10.1016/j.conbuildmat.2010.06.048 ↗
38. Effect of ultraviolet aging on rheology, chemistry and morphology of ultraviolet absorber modified bitumen10.1617/s11527-012-9958-3 ↗
39. La (OH)3 nanorods and La2O3 nanoplates: Facile synthesis and photoluminescence properties10.1016/j.matlet.2012.12.055 ↗
40. Synthesis and UV-shielding properties of ZnO- and CaO-doped CeO2 via soft solution chemical process10.1016/S0167-2738(02)00715-4 ↗
41. Synthesis and properties of luminescent material La2O2CO3
42. Locating lanthanide impurity levels in the forbidden band of host crystals10.1016/j.jlumin.2004.01.064 ↗
43. Spot price of rare earth. https://hq.smm.cn/xt, 2019 (accessed 18 April 2019).