journal article·2020-01Open access

Investigation of the hydrothermal treatment for maximizing the MSWI bottom ash content in fine lightweight aggregates

V. Caprai, K. Schollbach, M.V.A. Florea, H.J.H. Brouwers

Abstract

Abstract The recycling of Municipal Solid Waste Incineration Bottom ash (BA) with a size below 4 mm is often difficult, due to its high contmination and porosity. To increase its reuse, the manufacture of lightweight aggregates represents a suitable option, as it takes advantage of the BA porous structure and uses cement for the immobilization of harmful contaminants. For highly contaminated ashes, hydrothermal treatment (HT) is known for further improving the immobilization of some heavy metals in the cementitious matrix. However, not many studies have investigated it as a curing method for pellets. This study addresses the application of highly contaminated BA fines in the production of lightweight aggregates. Firstly, pellets containing up to 80%wt. BA are manufactured and classified as lightweight aggregates, according to EN 13055. In the absence of HT, the formation of Friedel’s salt helps the Cl− retention, lowering the leaching by 65% compared to theoretical values. After HT, the formation of tobermorite on the pellet surface is beneficial for the flexural strength (+14%). However, the decomposition of phases such as Friedel’s salt increases the leaching of Cl−, Cu, Mo, and Zn compared to standard cured samples.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Concrete and Cement Materials Research · Pigment Synthesis and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Heavy metals in cement and concrete resulting from the co-incineration of wastes in cement kilns with regard to the legitimacy of waste utilisation
2. A two-stage treatment for municipal solid waste incineration (MSWI) bottom ash to remove agglomerated fine particles and leachable contaminants10.1016/j.wasman.2017.05.029 ↗
3. In-depth mineralogical quantification of MSWI bottom ash phases and their association with potentially toxic elements10.1016/j.wasman.2019.01.031 ↗
4. Effect of autoclave curing on the microstructure of blended cement mixture incorporating ground dune sand and ground granulated blast furnace slag10.1007/s40069-015-0104-9 ↗
5. Utilization of fly ash as engineering pellet aggregates10.1007/s00254-006-0248-7 ↗
6. Utilization of fly ash by pelletization process; theory, application areas and research results10.1016/S0921-3449(00)00042-2 ↗
7. MSWI ashes as mineral additions in concrete10.1016/j.cemconres.2004.02.001 ↗
8. Mechanisms of cement hydration10.1016/j.cemconres.2010.09.011 ↗
9. Evaluation of the influence of mechanical activation on physical and chemical properties of municipal solid waste incineration sludge
10. MSWI bottom ash as binder replacement in wood cement composites10.1016/j.conbuildmat.2018.11.153 ↗
11. Influence of hydrothermal treatment on the mechanical and environmental performances of mortars including MSWI bottom ash10.1016/j.wasman.2018.06.030 ↗
12. Influence of hydrothermal treatment on the mechanical and environmental performances of mortars including MSWI bottom ash10.1016/j.wasman.2018.06.030 ↗
13. V. Caprai, K. Schollbach, M.V.A. Florea, H.J.H. Brouwers, 2019b. Application of Municipal Solid Waste Incineration Filter Cake as Supplementary Cementitious Material_Final2. Prog.10.1016/j.conbuildmat.2020.118833 ↗
14. V. Caprai, K. Schollbach, M.V.A. Florea, H.J.H. Brouwers, Evaluation of the effects of hydrothermal curing on the mechanical behaviour of mortars characterized by MSWI bottom ash fine aggregates in: 6th International Conference on Non-Traditional Cement and Concrete, 2017b, pp. 1–8.
15. A.J. Chandler, T.T. Eighmy, J. Hartlén, O. Hjelmar, D.S. Kosson, S.E. Sawell, H.A. van der Sloot, J. Vehlow, Municipal solid waste Municipal Solid Waste Incinerator Residues., 1997, pp. 15–57.10.1016/S0166-1116(97)80008-8 ↗
16. Properties of lightweight aggregate produced by rapid sintering of incinerator bottom ash10.1016/j.resconrec.2004.05.004 ↗
17. Influence of porosity on compressive and tensile strength of cement mortar10.1016/j.conbuildmat.2012.11.072 ↗
18. Recycling of MSWI fly ash by means of cementitious double step cold bonding pelletization: technological assessment for the production of lightweight artificial aggregates10.1016/j.jhazmat.2015.06.018 ↗
19. Antimony leaching from MSWI bottom ash: modelling of the effect of pH and carbonation10.1016/j.wasman.2011.09.018 ↗
20. EN 1015-10, 2006. Mortar, Methods of test for mortar for masonry – Part 10: determination of dry bulk density of hardened.
21. EN 1015-3, 2007. Method for testing mortars for masonry - Part 3: Determination of consistency of fresh mortars (by Flow table).
22. EN 13055, 2016. European standard EN 13055-2:2004.
23. EN 196-1 · 2005
24. EN 933-2, 1996. Tests for geometrical properties of aggregates. Determination of particle size distribution. Test sieves, nominal size of apertures.
25. M.V.A. Florea, 2016. Environmental Interactions of Cement-Based Products, In Int. Conf. Adv. Cem. Concr. Technol. Africa, Dar es Salaam, Tanzania.
26. Tobermorite synthesis under hydrothermal conditions10.1016/j.proeng.2016.07.394 ↗
27. B.R. Gevers, F.J.W.J. Labuschagné, Temperature effects on the dissolution-precipitation synthesis of hydrocalumite 050010, 2019 050010, doi: 10.1063/1.5084829.10.1063/1.5084829 ↗
28. Immobilization of heavy metals (Pb, Cu, Cr, Zn, Cd, Mn) in the mineral additions containing concrete composites10.1016/j.jhazmat.2008.03.007 ↗
29. Ettringite and C-S-H Portland cement phases for waste ion immobilization: a review10.1016/S0956-053X(96)00072-4 ↗
30. Preliminary assessment of three new European leaching tests10.1016/S0956-053X(03)00129-6 ↗
31. J. Holm, J.B. Hansen, CEN EN 12457 leaching test: Comparison of test results obtained by part 1 and 2 with test results obtained by part 3 Dorthe Lærke Baun Jesper Holm Jette Bjerre, 2003, Hansen Margareta Wahlström.
32. Flow analysis of water–powder mixtures: application to specific surface area and shape factor10.1016/j.cemconcomp.2008.09.010 ↗
33. Modeling the formation of the quench product in municipal solid waste incineration (MSWI) bottom ash10.1016/j.wasman.2016.03.019 ↗
34. Influence of tobermorite formation on mechanical properties of hydrothermally solidified blast furnace slag10.1007/s10853-007-2025-8 ↗
35. Municipal incineration bottom ash treatment using hydrothermal solidification10.1016/j.wasman.2006.01.015 ↗
36. Studies using 27Al MAS NMR of AFm and AFt phases and the formation of Friedel’s salt10.1016/S0008-8846(02)00901-8 ↗
37. High performance of treated and washed MSWI bottom ash granulates as natural aggregate replacement within earth-moist concrete10.1016/j.wasman.2016.01.010 ↗
38. Use of power plant bottom ash as fine and coarse aggregates in high-strength concrete10.1016/j.conbuildmat.2010.06.065 ↗
39. Influence of the Ca/Si ratio on the compressive strength of cementitious calcium-silicate-hydrate binders10.1039/C7TA06104H ↗
40. Larsson, R., 2014. Energy recovery of metallic aluminium in MSWI bottom ash Different approaches to hydrogen production from MSWI bottom.
41. Utilization of municipal solid waste incineration bottom ash in blended cement10.1016/j.jclepro.2012.03.038 ↗
42. Mechanical properties of reactive powder concrete for different curing regimes
43. NEN-EN 7383, 2003.
44. Production of hydrogen in the reaction between aluminum and water in the presence of NaOH and KOH10.1590/S0104-66322012000200014 ↗
45. Percolation and batch leaching tests to assess release of inorganic pollutants from municipal solid waste incinerator residues10.1016/j.wasman.2010.10.015 ↗
46. Nature of C-S-H in hardened cements10.1016/S0008-8846(99)00168-4 ↗
47. Soil Quality Decree [WWW Document], 2018. URL https://wetten.overheid.nl/BWBR0023085/2018-11-30#BijlageA
48. Integral recycling of municipal solid waste incineration (MSWI) bottom ash fines (0–2 mm) and industrial powder wastes by cold-bonding pelletization10.1016/j.wasman.2017.02.028 ↗
49. Application of thermally activated municipal solid waste incineration (MSWI) bottom ash fines as binder substitute10.1016/j.cemconcomp.2016.03.015 ↗
50. 1997
51. Properties of autoclaved lightweight aggregate concrete10.1016/j.buildenv.2006.11.024 ↗
52. Municipal solid waste incinerator (MSWI) concrete10.1533/9780857098993.3.273 ↗
53. Binding and leaching of trace elements in Portland cement pastes10.1016/j.cemconres.2015.08.002 ↗