Use of polymeric fibers to improve the mechanical properties and impact resistance of lightweight SCC
Source abstract
Abstract
Abstract This paper aims to evaluate the impact resistance and mechanical properties of a number of semi-lightweight self-consolidating concrete (SLWSCC) mixtures containing coarse and fine lightweight expanded slate aggregates and reinforced with different types of polymeric fibers. The study investigated different replacement levels of normal-weight fine or coarse aggregates by fine and coarse lightweight expanded slate aggregates in order to obtain SLWSCC mixtures with minimum possible density. The investigation covered different binder contents (550 kg/m3 and 600 kg/m3), coarse-to-fine aggregate (C/F) ratios (0.7 and 1.0), fiber types (polyvinyl alcohol and polypropylene fibers), fiber lengths (8 mm, 12 mm, and 19 mm), and fiber volumes (0.3%, 0.5%, and 1%). Two normal-weight self-consolidating concrete (NWSCC) mixtures containing coarse and fine crushed granite aggregates were also tested for comparison. The results indicated that the addition of shorter fibers showed more pronounced improvement of the impact resistance compared to longer fibers. Mixtures developed with expanded slate fine aggregate exhibited better strength-to-weight ratio in terms of splitting tensile strength (STS), flexural strength (FS), and energy absorption capacity compared to their counterpart mixtures containing expanded slate coarse aggregate. With the absence of self-compactability restrictions (especially the passing ability), it was possible to develop vibrated concrete mixtures with higher content of lightweight aggregate and polymeric fibers, achieving lightweight concrete with lower density and higher STS, FS, ductility, and energy absorption capacity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Workability and mechanical, acoustic and thermal properties of lightweight aggregate concrete with a high volume of entrained air10.1016/j.conbuildmat.2011.08.067 ↗
2. Truss rail method for punching shear strength of flat-plate slab-column using high-strength lightweight concrete10.1680/macr.12.00116 ↗
3. Long-span bridges in Norway constructed in high-strength LWA concrete10.1016/0141-0296(95)00158-1 ↗
4. Lightweight concrete in highway bridges
5. Study of application of lightweight aggregate concrete to construct post-tensioned long-span slabs10.1016/j.proeng.2017.02.166 ↗
6. Lightweight concrete in America: presence and challenges10.1016/j.spc.2018.06.007 ↗
7. Thermal expansion of self-consolidating normal and lightweight aggregate concrete at elevated temperature10.1016/j.conbuildmat.2009.04.004 ↗
8. A floating concrete platform hull made of lightweight aggregate concrete10.1016/0141-0296(95)00160-3 ↗
9. Characteristics of self-consolidating concrete using two types of lightweight coarse aggregates10.1016/j.conbuildmat.2009.08.004 ↗
10. Mechanical properties of self-consolidating concrete containing lightweight recycled aggregate in different mixture compositions10.1016/j.jobe.2015.09.005 ↗
11. Shi C, Yang X, Yu Z, Khayat H (2005) Design and application of self-compacting lightweight concretes. In: SCC’2005-China: 1st international symposium on design, performance and use of self-consolidating concrete RILEM Publications SARL.10.1617/2912143624.005 ↗
12. Effect of metakaolin and silica fume on the durability of self-consolidating concrete10.1016/j.cemconcomp.2012.02.013 ↗
13. Development of cost-effective self-consolidating concrete incorporating fly ash, slag cement, or viscosity-modifying admixtures
14. Development of self-consolidating rubberized concrete incorporating silica fume10.1016/j.conbuildmat.2017.11.146 ↗
15. Self-compacting lightweight concrete produced with expanded clay aggregate10.1016/j.conbuildmat.2012.04.111 ↗
16. Properties of semi-lightweight self-consolidating concrete containing lightweight slag aggregate10.1016/j.conbuildmat.2014.10.028 ↗
17. Strength and fracture energy characteristics of self-consolidating concrete incorporating polyvinyl alcohol, steel and hybrid fibres10.1016/j.conbuildmat.2013.03.054 ↗
18. Use of steel fibers to optimize self-consolidating concrete mixtures containing crumb rubber
19. Influence of steel fibres on strength and ductility of normal and lightweight high strength concrete10.1016/S0360-1323(01)00109-3 ↗
20. Properties of self-consolidating rubberised concrete reinforced with synthetic fibres10.1680/jmacr.16.00433 ↗
21. Experimental study on static and dynamic mechanical properties of steel fiber reinforced lightweight aggregate concrete10.1016/j.conbuildmat.2012.09.016 ↗
22. Effect of steel fiber on the mechanical properties of oil palm shell lightweight concrete10.1016/j.matdes.2011.02.055 ↗
23. Lightweight aggregate concrete fiber reinforcement-a review10.1016/j.conbuildmat.2012.07.071 ↗
24. Trade-off between strength and ductility of random discontinuous fiber reinforced cementitious composites10.1016/0958-9465(94)90027-2 ↗
25. Some characteristics of high strength fiber reinforced lightweight aggregate concrete10.1016/S0958-9465(02)00016-1 ↗
26. The combined effect of crumb rubber and synthetic fibers on impact resistance of self-consolidating concrete10.1016/j.conbuildmat.2017.12.077 ↗
27. Use of synthetic fibers in self-compacting lightweight aggregate concretes10.1016/j.jobe.2015.10.006 ↗
28. ASTM C150/C150M · 2012
29. ASTM C618 · 2012
30. ASTM C494/C494M · 2013
31. EFNARC, 2005. The European Guidelines for Self-Compacting Concrete Specification, Production and Use. European Federation for Specialist Construction Chemicals and Concrete Systems English ed. Norfolk, UK.
32. Use of metakaolin on enhancing the mechanical properties of self-consolidating concrete containing high percentages of crumb rubber10.1016/j.jclepro.2016.03.044 ↗
33. Fresh and hardened properties of self-compacting concrete containing metakaolin10.1016/j.conbuildmat.2012.04.109 ↗
34. ASTM C143/C143M · 2015
35. ASTM C39/C39M · 2011
36. ASTM C496 · 2011
37. ASTM C78 · 2010
38. ACI 544.2R-89 · 1999
39. The investigation on the workability of fibre cocktail reinforced self-compacting high performance concrete10.1016/j.conbuildmat.2007.03.034 ↗
40. Mechanical properties of steel fiber reinforced high strength lightweight self-compacting concrete (SHLSCC)10.1016/j.conbuildmat.2015.08.112 ↗
41. Effect of aggregate and cementitious material on properties of lightweight self-consolidating concrete for prestressed members10.1016/j.conbuildmat.2015.03.084 ↗
42. Mix design and properties of lightweight self-consolidating concretes developed with furnace slag, expanded clay and expanded shale aggregates
43. Fresh and hardened-state properties of self-compacting lightweight concrete reinforced with steel fibers10.1016/j.conbuildmat.2015.12.060 ↗
44. Investigation on mechanical properties and microstructure of high performance polypropylene fiber reinforced lightweight aggregate concrete10.1016/j.conbuildmat.2016.04.116 ↗
45. Cracking behavior of concrete with shrinkage reducing admixtures and PVA fibers10.1016/j.cemconcomp.2009.08.004 ↗
46. Effect of fiber type on impact and abrasion resistance of engineered cementitious composite