journal article·2020-01Open access

Retrofitting RC infills by a glass fiber mesh reinforced overlay and steel dowels: experimental and numerical study

Luca Facconi, Fausto Minelli

Abstract

Abstract Many existing Reinforced Concrete (RC) buildings infilled with masonry panels are vulnerable to seismic actions due to lack of proper seismic detailing. For buildings located in low-moderate seismicity regions, a possible retrofitting option could be a reinforced mortar coating applied on the building facades in order to significantly increase its seismic resistance. The present paper studies thin glass fiber mesh reinforced mortar overlays for strengthening RC weak frames infilled with hollow brick masonry. Attention is devoted to the steel dowel connection between the masonry panel and the RC frame to reduce shear sliding. An experimental evaluation of the effectiveness of this enhanced technique is presented and compared against previous results in which shear sliding significantly limited the structural response. In addition, a finite element model has been developed and calibrated to properly simulate the response of the test specimens.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Masonry and Concrete Structural Analysis · Structural Behavior of Reinforced Concrete · Seismic Performance and Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. EN 1998-1: Eurocode 8, Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings, 2004.
2. FEMA 450 2003 EDITION – NEHRP Recommended provisions for seismic regulations for new buildings and other structures – Part 1: provisions.
3. P. Morandi, S. Hak, G. Magenes, In-plane experimental response of strong masonry infills, In: Proceedings of the 9th International Brick and Block Masonry Conference 2014.
4. In-plane shear improvement of unreinforced masonry wall panels using NSM CFRP strips10.1061/(ASCE)CC.1943-5614.0000400 ↗
5. Performance evaluation of retrofitting strategies for non-seismically designed RC buildings using steel braces10.1007/s10518-012-9421-4 ↗
6. Out-of-plane behaviour of infill masonry panels strengthened with composite materials10.1617/s11527-014-0384-6 ↗
7. Experimental investigation of the use of ferrocement laminates for repairing masonry in filled RC frames
8. Use of steel fiber reinforced mortar for seismic strengthening10.1016/j.conbuildmat.2010.06.096 ↗
9. Seismic strengthening of masonry-infilled RC frames with TRM: experimental study10.1061/(ASCE)CC.1943-5614.0000507 ↗
10. Experimental Study of Solid and Hollow Clay Brick Masonry Walls Retrofitted by Steel Fiber-Reinforced Mortar Coating
11. Experimental results on the retrofitting of hollow brick masonry walls with reinforced high performance mortar coatings.10.1016/j.conbuildmat.2017.03.112 ↗
12. Shake-table tests of a 3-story masonry-infilled RC frame retrofitted with composite materials10.1061/(ASCE)ST.1943-541X.0000689 ↗
13. Kyriakides, M.A. and Billington, S.L., “Seismic retrofit of masonry –infilled non-ductile reinforced concrete frames using sprayable ductile fiber-reinforced cementitious composites. Proc. of the 14th World Conference on Earthquake Engineering October 12–17, 2008, Beijing, China.
14. Experimental and numerical study on the shear behavior of stone masonry walls strengthened with GFRP reinforced mortar coating and steel-cord reinforced repointing10.1016/j.engstruct.2015.02.024 ↗
15. Strengthening of infilled reinforced concrete frames with TRM: study on the development and testing of textile-based anchors10.1061/(ASCE)CC.1943-5614.0000390 ↗
16. Analysis of masonry structures without box behavior10.1080/15583058.2010.528824 ↗
17. L. Facconi, F. Minelli, E. Giuriani, In-plane cyclic tests on hollow clay brick masonry infills retrofitted by glass fiber mesh reinforced mortar coating, in: Proceedings of the 16th international brick and block masonry conference (IBMAC 2016), Padova, Italy. 2016, pp. 1191–1199.10.1201/b21889-149 ↗
18. Response of infilled RC frames retrofitted with a cementitious fiber-mesh reinforced coating in moderate seismicity areas10.1016/j.conbuildmat.2017.11.033 ↗
19. Evaluation and considerations about fundamental periods of damaged reinforced concrete buildings10.5194/nhess-13-1903-2013 ↗
20. EN, 10027–1: Designation systems for steels – Part 1 Steel names 2005.
21. Analytical modeling of masonry-infilled RC frames retrofitted with textile reinforced mortar10.1061/(ASCE)CC.1943-5614.0000553 ↗
22. Stud shear connection design for composite concrete slab and wood beams10.1061/(ASCE)0733-9445(2002)128:12(1544) ↗
23. Giuriani · 1987
24. EN, 772-1 – Methods of tests for masonry units – Part 1: Determination of compressive strength 2011.
25. EN, 1015-11: Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar, 2007.
26. EN, 1052-1 – Methods of Test for Masonry. Determination of Compressive Strength 2001.
27. Determination of the interaction between a masonry wall and a confining frame10.1016/j.engstruct.2018.04.001 ↗
28. Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review10.1088/0957-0233/20/6/062001 ↗
29. B.J. Pease, H. Stang, M.R. Geiker, W.J. Weiss, Photogrammetric assessment of flexure induced cracking of reinforced concrete beams under service loads”, in: Proceedings of the 2nd International RILEM Symposium, Advances in Concrete through Science and Engineering, Quebec City, Canada, 2006.10.1617/2351580028.041 ↗
30. Tomaževič · 1999
31. Predicting Uniaxial Cyclic Compressive Behavior of Brick Masonry: New Analytical Model10.1061/(ASCE)ST.1943-541X.0001961 ↗
32. A review of numerical models for masonry structures
33. Diana 10.1. User’s manual. TNO DIANA BV, Delft, The Netherlands, 2016.
34. Rots · 2016 · 227
35. Shear resistance of masonry walls and Eurocode 6: shear versus tensile strength of masonry”. Materials and Structures (2009) 42:889–907
36. Rots · 1988
37. EN 1992-1-1: Eurocode 2: Design of Concrete Structures. Part 1-1: General rules and rules for buildings, CEN, 2005.
38. Experimental determination of crack softening characteristics of normalweight and lightweight concrete
39. fib Model Code for Concrete Structures 2010. Fédération Internationale du Béton. Lausanne: Ernst & Sohn, 2013.10.1002/9783433604090 ↗
40. Tensile properties of short-glass-fiber- and short-carbon-fiber-reinforced polypropylene composites
41. ‘‘Shear force-slip relationship for stud connectors”. Studi e Ricerche’.’ Corso di Perfezionamento per le Costruzioni in Cemento Armato F.lli Pesenti
42. Effect of masonry joints on the behavior of infilled frames10.1016/j.conbuildmat.2018.08.209 ↗