Embedment strength of smooth dowel-type fasteners in cross-laminated timber
Source abstract
Abstract
Abstract Embedment strength is a fundamental parameter for dowel-type connection design in timber structures. It is known as a system property dependent on the characteristics of both the fastener and the wood material. The orthogonal layup in cross-laminated timber (CLT) differentiates it from solid timber (ST) and glued-laminated timber (GLT) in terms of connection properties. The effects of CLT layup feature (i.e., the thickness ratio of transverse layer to the total thickness, TRTL) as well as wood density, dowel diameter, and loading angle on the embedment strength of smooth dowel-type fasteners were investigated in this study. A total of 660 CLT embedment tests were performed according to the half-hole method in ASTM D5764. The results indicated that the embedment strength and failure modes of CLT were different from those of GLT due to the existence of a transverse layer in CLT. The influence trends of four effective factors on the CLT embedment strength were different, and each factor had a statistically significant impact on the embedment strength of the CLT. The experimental data were used to examine the existing predictive models of CLT embedment strength. It was found that the influences of the four effective factors on CLT embedment strength differed among the models. A modified design equation was proposed based on the test results with a better agreement than the existing design equations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Wood Treatment and Properties · Tree Root and Stability Studies · Bamboo properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. FPInnovations, BSLC, CLT handbook: cross-laminated timber, US Ed., FPInnovations, Pointe-Claire, Quebec, Canada, 2013.
2. The influences of moisture content variation, number and width of gaps on the withdrawal resistance of self tapping screws inserted in cross laminated timber10.1016/j.conbuildmat.2016.09.008 ↗
3. Cross laminated timber (CLT): Design approaches for dowel-type fasteners and connections10.1016/j.engstruct.2018.05.032 ↗
4. Influence of technical characteristics on the rolling shear properties of cross laminated timber by modified planar shear tests
5. Cross laminated timber (CLT): overview and development10.1007/s00107-015-0999-5 ↗
6. A hysteresis model for timber joints with dowel-type fasteners10.1016/j.engstruct.2017.12.011 ↗
7. Cross-laminated timber shear connections with double-angled self-tapping screw assemblies10.1061/(ASCE)ST.1943-541X.0001572 ↗
8. C. Sandhaas, J. Boukes, J.W.G.V.D. Kulien, A. Ceccotti, Analysis of X-lam panel-to-panel connections under monotonic and cyclic loading, in: Proceedings of the 42nd CIB Working Commission W18–Timber Structures, 2009. Dübendorf, Switzerland, Paper CIB–W18/42-12-2.
9. S. Kennedy, A. Salenikovich, W. Munoz, M. Mohammad, Design equations for dowel embedment strength and withdrawal resistance for threaded fasteners in CLT, in: Proceedings of the World Conference on Timber Engineering, 2014, Quebec, Canada.
10. Review of existing and newly developed approaches to obtain timber embedding strength10.1002/pse.213 ↗
11. T. Uibel, H.J. Blaβ, Load Carrying Capacity of Joints with Dowel Type Fasteners in Solid Wood Panels, in: 39th CIB-W18 Meeting, 2006, Florence, Italy, Paper 39-7-5.
12. T. Uibel, H.J. Blaβ, Joints with Dowel Type Fasteners in CLT structures, in: COST Action FP1004, Focus Solid Timber Solutions–European Conference on Cross Laminated Timber (CLT), 2013, pp. 119–134. Graz, Austria.
13. T. Uibel, H.J. Blaβ, Edge Joints with Dowel Type Fasteners in Cross Laminated Timber, in: Proceedings of the 44th CIB-W18 meeting, 2007, Bled, Slovenia, Paper 40-7-2.
14. Influence of number of layers on embedment strength of dowel-type connections for glulam and cross-laminated timber10.1016/j.engstruct.2018.09.005 ↗
15. NDS · 2018 · 2018
16. CSA O86-14, Engineering design in wood, CSA Group, Mississauga, Canada, 2014.
17. EN 383:2007, Timber structures-Test methods-Determination of embedding strength and foundation values for dowel type fasteners, CEN, Brussels, Belgium, 2007.
18. ASTM D5764-97a (2018), Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products, ASTM International, West Conshohocken, PA, 2018.
19. A comparison between the EN 383 and ASTM D5764 test methods for dowel‐bearing strength assessment of wood: experimental and numerical investigations10.1111/j.1475-1305.2008.00570.x ↗
20. EN 14358:2016, Timber structures-Calculation and verification of characteristic values, CEN, Brussels, Belgium, 2016.
21. Determination of embedding strength of wood for dowel-type fasteners10.1007/BF00767291 ↗
22. Embedment strength of steel dowel in wood specimens according to ABNT NBR 7190:1997 and ASTM D5764: 2007 Standards
23. Kennedy · 2014