journal article·2020-03Open access

Influence of PZT insertion on Portland cement curing process and piezoelectric properties of 0–3 cement-based composites by impedance spectroscopy

J.A. Santos, A.O. Sanches, J.L. Akasaki, M.M. Tashima, E. Longo, J.A. Malmonge

Abstract

Abstract 0–3 Cement-based piezoelectric composites were produced. It was verified that not only the piezoelectric properties of the composites, but also the influence of piezoelectric phase in the cement paste curing process. The results showed that the final piezoelectric and dielectric properties of the composites depend mainly on the interfacial microstructure between the matrix and the piezoelectric insertion. DC conductivity and impedance spectroscopy measurements showed a high sensitivity to the identification of retard hydration process or phase transformations. Piezoelectric properties show ageing fluctuations, attributed to the cement curing process which promoted unstable dipoles at the same time that it promoted piezoelectric phase constriction.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Smart Materials for Construction · Ultrasonics and Acoustic Wave Propagation · Structural Health Monitoring Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Piezoelectric materials for sustainable building structures: fundamentals and applications10.1016/j.rser.2018.09.038 ↗
2. From buildings to smart buildings-sensing and actuation to improve energy efficiency10.1109/MDT.2012.2211855 ↗
3. Creating sustainable environment using smart materials in smart structures10.17485/ijst/2016/v9i30/99171 ↗
4. Internet of things for smart cities10.1109/JIOT.2014.2306328 ↗
5. Research on applications of piezoelectric materials in smart structures
6. Piezoelectric and dielectric properties of piezoelectric ceramic-sulphoaluminate cement composites10.1016/j.jeurceramsoc.2004.07.031 ↗
7. Vibration control of civil structures using piezoceramic smart materials: a review10.1016/j.engstruct.2006.02.002 ↗
8. Influence of polymer insertion on the dielectric, piezoelectric and acoustic properties of 1–0-3 polyurethane/cement-based piezo composite10.1016/j.materresbull.2019.110541 ↗
9. Dielectric, ferroelectric and piezoelectric properties of 0–3 barium titanate-Portland cement composites10.1007/s00339-011-6307-2 ↗
10. Curing time and heating conditions for piezoelectric properties of cement-based composites containing PZT10.1016/j.conbuildmat.2016.10.107 ↗
11. Cement-Based 0–3 Piezoelectric Composites10.1111/j.1151-2916.2002.tb00089.x ↗
12. High piezoelectric and dielectric properties of 0–3 PZT/cement composites by temperature treatment10.1016/j.cemconcomp.2016.05.025 ↗
13. Microstructure and performance of 1–3 connectivity environmental friendly lead-free BNBK-Portland cement composites10.1016/j.materresbull.2017.02.008 ↗
14. Performance investigation of 1–3 piezoelectric ceramic-cement composite10.1016/j.matchemphys.2009.12.045 ↗
15. Static analysis of 2–2 cement-based piezoelectric composites10.1007/s00419-010-0454-3 ↗
16. Theoretical solutions of 2–2 multi-layered cement-based piezoelectric composite under impact load10.1016/j.compstruct.2018.04.059 ↗
17. Investigation of inorganic fillers on properties of 2–2 connectivity cement/polymer based piezoelectric composites10.1016/j.conbuildmat.2015.07.090 ↗
18. Effects of temperature on the performance of the piezoelectric-based smart aggregates active monitoring method for concrete structures
19. Design and fabrication of a new fiber-cement-piezoelectric composite sensor for measurement of inner stress in concrete structures10.1016/j.acme.2018.12.007 ↗
20. Microstructure, dielectric and piezoelectric properties of 0–3 lead free barium zirconate titanate ceramic-Portland fly ash cement composites10.1016/j.ceramint.2017.09.112 ↗
21. Evaluation the compressive strength of the cement paste blended with supplementary cementitious materials using a piezoelectric-based sensor10.1016/j.conbuildmat.2018.03.165 ↗
22. Influence of carbon nanotubes on the performance of bismuth sodium titanate-bismuth potassium titanate-barium titanate ceramic/cement composites10.1016/j.ceramint.2017.05.225 ↗
23. Poling effects and piezoelectric properties of PVDF-modified 0–3 connectivity cement-based/lead-free 0.94(Bi0.5Na0.5)TiO3–0.06BaTiO3 piezoelectric ceramic composites10.1007/s10853-017-1533-4 ↗
24. Piezoelectric ring actuator technique to monitor early-age properties of cement-based materials10.1016/j.cemconcomp.2015.09.001 ↗
25. Piezoelectric and dielectric properties of PZT-cement-Aluminum nano-composites10.1016/j.ceramint.2014.05.136 ↗
26. Study on the microstructure of cement-based piezoelectric ceramic composites10.1016/j.conbuildmat.2014.08.058 ↗
27. Cement-based piezoelectric ceramic smart composites10.1016/j.compscitech.2004.12.006 ↗
28. Piezoelectric effect of hardened cement paste10.1016/S0958-9465(03)00104-5 ↗
29. Influence of polarization on properties of 0–3 cement-based PZT composites10.1016/j.cemconcomp.2004.02.001 ↗
30. Effect of carbon black on properties of 0–3 piezoelectric ceramic/cement composites10.1016/j.cap.2009.01.011 ↗
31. Effect of particle size on the dielectric and piezoelectric properties of 0–3BCTZO/cement composites10.1016/j.ceramint.2013.05.118 ↗
32. Aging of 0–3 piezoelectric PZT ceramic-Portland cement composites10.1016/j.ceramint.2014.05.073 ↗
33. The review of pore structure evaluation in cementitious materials by electrical methods10.1016/j.conbuildmat.2016.05.037 ↗
34. The review of early hydration of cement-based materials by electrical methods10.1016/j.conbuildmat.2017.04.073 ↗
35. A review on microstructural characterization of cement-based materials by AC impedance spectroscopy10.1016/j.cemconcomp.2019.03.018 ↗
36. Impedance spectroscopy study of hardened Portland cement paste10.1016/S0008-8846(02)00720-2 ↗
37. Study of alinite cement hydration by impedance spectroscopy10.1016/S0008-8846(02)00944-4 ↗
38. Impedance spectroscopy to characterize the pore structure during the hardening process of Portland cement paste10.1016/j.electacta.2005.02.125 ↗
39. Impedance measurement to characterize the pore structure in Portland cement paste10.1016/j.conbuildmat.2013.10.064 ↗
40. Differential analysis of AC impedance spectroscopy of cement-based materials considering CPE behavior10.1016/j.conbuildmat.2017.03.119 ↗
41. Early hydration process of portland cement paste by electrical measurement10.1061/(ASCE)0899-1561(2006)18:1(99) ↗
42. Determination of concrete setting time using electrical resistivity measurement10.1061/(ASCE)0899-1561(2007)19:5(423) ↗
43. Electrical properties of fluidified Portland cement mixes in the early stage of hydration10.1016/S0008-8846(00)00282-9 ↗
44. Influence of the aggregate on the electrical conductivity of Portland cement concretes10.1016/S0008-8846(03)00166-2 ↗
45. Characterization of early-age hydration process of cement pastes based on impedance measurement10.1016/j.conbuildmat.2014.07.009 ↗
46. Hydration process of fly ash blended cement pastes by impedance measurement10.1016/j.conbuildmat.2016.03.141 ↗
47. The early hydration characteristics of portland cements with superplasticizer using electrical measurements
48. Interpretation of the impedance spectroscopy of cement paste via computer modelling10.1007/BF01151088 ↗
49. Electrical conductivity of setting cement paste with different mineral admixtures10.1016/j.conbuildmat.2011.08.068 ↗
50. Electrical conductivity of cement pastes in different curing media10.1007/BF01729931 ↗
51. Monitoring of cement hydration by broadband time-domain-reflectometry dielectric spectroscopy10.1063/1.1797549 ↗
52. Electrode configurations and impedance spectra of cement pastes10.1007/BF00356122 ↗
53. Dielectric properties of portland cement paste as a function of time since mixing10.1063/1.343577 ↗
54. Interpretation of the impedance spectroscopy of cement paste via computer modelling - Part II Dielectric response10.1007/BF01151088 ↗
55. Computer simulation of impedance spectroscopy in two dimensions: application to cement paste10.1111/j.1151-2916.1993.tb03933.x ↗
56. A rationalized A.C. impedence model for microstructural characterization of hydrating cement systems10.1016/0008-8846(93)90101-E ↗
57. Influence of microstructure on the dielectric and piezoelectric properties of lead zirconate-polymer composites10.1111/j.1151-2916.1989.tb06248.x ↗
58. Yang · 2004
59. Piezoelectric and dielectric behavior of 0–3 cement-based composites mixed with carbon black10.1016/j.jeurceramsoc.2008.11.014 ↗