Effect of component materials and mixing protocol on the short-term performance of generic ultra-high-performance concrete
Source abstract
Abstract
Abstract Ultra-high-performance concrete (UHPC) has drawn the attention of researchers and practitioners because of its unique properties that make it particularly well-suited for infrastructure applications. To facilitate on-site mixing and allow larger batches to be produced in the field, this paper examines the fresh and hardened properties of generic UHPC made from components sourced from a variety of suppliers. The tests conducted include workability, compressive strength, and direct tensile properties. Steel fibers with two different aspect ratios and dosages are also investigated and the possibility of replacing steel fibers with polyethylene fibers is explored. Results from tests show that with few exceptions, the 28-day compressive strength and peak tensile strength of all mixtures are higher than 150 MPa and 8.3 MPa, respectively, fulfilling the minimum requirement for field-cast UHPC. In addition, a new mixing protocol is introduced to reduce the burden on field mixers and allow for larger mix loads in the field.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Flexural strength and porosity of cements10.1038/289388a0 ↗
2. Bache · 1981
3. P. Richard, M. Cheyrezy. Reactive powder concrete with high ductility and 200-800 MPa compressive strength, in: ACI Spring Convention, San Francisco, SP, 1994, pp. 144–124.
4. Composition of reactive powder concretes10.1016/0008-8846(95)00144-2 ↗
5. Optimization of ultra-high-performance concrete by the use of a packing model10.1016/0008-8846(94)90022-1 ↗
6. Ultra-high performance concrete and fiber reinforced concrete: achieving strength and ductility without heat curing10.1617/s11527-011-9767-0 ↗
7. Ultra-high performance concrete with compressive strength exceeding 150 MPa (22 ksi): a simpler way
8. Schmidt · 2005 · 51
9. B.A. Graybeal. UHPC in the US highway transportation system, in: Proceedings of the Second International Symposium on Ultra High Performance Concrete, Kassel, Germany, 2008, pp. 11–17.
10. H.G. Russell, B.A. Graybeal, Ultra-high performance concrete: A state-of-the-art report for the bridge community, 2013, (No. FHWA-HRT-13-060).
11. Field application of nonproprietary ultra-high-performance concrete
12. Z.B. Haber, J.F. Munoz, B.A. Graybeal, Field testing of an ultra-high performance concrete overlay, 2017 (No. FHWA-HRT-17-096).
13. Radiation shielding of ultra-high-performance concrete with silica sand, amang and lead glass10.1016/j.conbuildmat.2018.03.243 ↗
14. Shear strength of steel fiber-reinforced ultrahigh-performance concrete beams without stirrups10.1061/(ASCE)ST.1943-541X.0000234 ↗
15. Y.L. Voo, S.J. Foster, Malaysia First Ultra-High Performance Concrete Prestressed Motorway Bridge: Experimental Verification, in: 5th International Specialty Conference on Fiber Reinforced Materials, Singapore, 2008 August 28–29.
16. Mechanical and permeability properties of the interface between normal concrete substrate and ultra high performance fiber concrete overlay10.1016/j.conbuildmat.2012.06.013 ↗
17. A new building system using joints of ultra high-strength fibre reinforced concrete
18. B. Graybeal, Design and construction of field-cast UHPC connections, 2014 (No. FHWA-HRT-14-084).
19. El-Tawil · 2016
20. Effects of variations in the mix constituents of ultra high performance concrete (UHPC) on cost and performance10.1617/s11527-015-0780-6 ↗
21. Effect of slag cement on the properties of ultra-high performance concrete10.1016/j.conbuildmat.2018.09.173 ↗
22. Properties of strain hardening ultra high performance fiber reinforced concrete (UHP-FRC) under direct tensile loading10.1016/j.cemconcomp.2013.12.015 ↗
23. Effects of silica powder and cement type on durability of ultra high performance concrete (UHPC)10.1016/j.cemconcomp.2015.11.005 ↗
24. Material efficiency in the design of ultra-high performance concrete10.1016/j.conbuildmat.2015.03.087 ↗
25. E. Sakai, N. Akinori, M. Daimon, K. Aizawa, H. Kato, Influence of superplasticizers on the fluidity of cements with different amount of aluminate phase, in: Second International Symposium on Ultra High Performance Concrete, 2008, pp. 85–92.
26. Development of 300 MPa ultra-high-strength mortar through a special curing regime10.1016/j.conbuildmat.2018.03.134 ↗
27. Influence of aggregate size and inclusion of polypropylene and steel fibers on the hot permeability of ultra-high performance concrete (UHPC) at elevated temperature10.1016/j.conbuildmat.2018.01.105 ↗
28. ASTM C1437-15 Standard Test Method for Flow of Hydraulic Cement Mortar, ASTM International, West Conshohocken, PA, 2015.
29. ASTM C109/C109M-16a Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens), ASTM International, West Conshohocken, PA, 2016.
30. AASHTO, T. “132-87 Standard Method of Test for Tensile Strength of Hydraulic Cement Mortars.”American Association of State and Highway Transportation Officials, 2009.
31. Influence of mixing procedure and mixer type on fresh and hardened properties of concrete: a review10.1617/s11527-012-9864-8 ↗
32. Influence of mixing method, speed and duration on the fresh and hardened properties of Reactive Powder Concrete10.1016/j.conbuildmat.2017.03.009 ↗
33. Very-high-performance concrete with ultrafine powders10.1016/S0008-8846(01)00732-3 ↗
34. Metakaolin in the formulation of UHPC10.1016/j.conbuildmat.2008.02.018 ↗
35. Mixture design and early age investigations of more sustainable UHPC10.1016/j.conbuildmat.2017.12.107 ↗
36. Effective low-energy mixing procedure to develop high-fluidity cementitious pastes10.1590/S1517-707620160001.0002 ↗
37. Über die Beziehung zwischen Kornabstufung und Zwischenraum in Produkten aus losen Körnern (mit einigen Experimenten)10.1007/BF01422986 ↗
38. Funk · 2013
39. Self-compacting concrete: theoretical and experimental study10.1016/j.cemconres.2005.06.002 ↗
40. A new mix design concept for earth-moist concrete: a theoretical and experimental study10.1016/j.cemconres.2008.04.002 ↗
41. An · 2010
42. Additivity effects in the rheology of fresh concrete containing water-reducing admixtures10.1016/j.conbuildmat.2010.12.001 ↗
43. B.A. Graybeal. Material property characterization of ultra-high performance concrete, 2006 (No. FHWA-HRT-06-103).
44. Effect of content and fineness of slag as high volume cement replacement on strength and durability of ultra-high performance mortar10.34118/jbms.v3i2.23 ↗
45. Effect of cement on superplasticizer adsorption, yield stress, thixotropy and segregation resistance
46. Effects of sand content, superplasticizer dosage, and mixing time on compressive strength of mortar
47. K. Wille, C. Boisvert-Cotulio. Development of non-proprietary ultra-high performance concrete for use in the highway bridge sector. Report No. PB2013-110587, National Technical Information Service, Springfield, VA, 2013.
48. Proposed classification of HPFRC composites based on their tensile response10.1617/s11527-006-9103-2 ↗