journal article·2020-04

Prediction of the coefficient of permeability of asphalt mixtures using the lattice Boltzmann method

Siyu Chen, Zhanping You, Song-Lin Yang, Xiaodong Zhou

Publisher page

Abstract

Abstract The Lattice Boltzmann method (LBM) is widely accepted to simulate fluid flow in porous materials. The objective of this study is to predict the coefficient of permeability of asphalt mixtures using the LBM. The numerical method was verified by simulating fluid flow in Poiseuille flow, parallel tubes, and sandstone samples. The three-dimensional microstructures of asphalt mixtures were reconstructed with X-ray computed tomography techniques and used as inputs for LBM simulations. The factors that affect the stability and accuracy of the simulations were also discussed. These factors include time steps, applied pressure gradient, and image resolution. The results of LBM simulations were compared with the experimental results. It was revealed that the LBM simulations successfully predicted the coefficient of permeability of asphalt mixtures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Lattice Boltzmann Simulation Studies · Aerosol Filtration and Electrostatic Precipitation · Heat and Mass Transfer in Porous Media

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. H.H. Ridgeway, Pavement Subsurface Drainage Systems N.C.H.R. Program: Chaplin, Connecticut, 1982.
2. Moisture susceptibility of asphalt mixtures, Part 1: mechanisms10.1080/10298430701792128 ↗
3. Moisture seepage in asphalt mixture using X-ray imaging technology10.1016/j.ijheatmasstransfer.2018.11.081 ↗
4. A review of water transport in dense-graded asphalt mixtures10.1016/j.conbuildmat.2017.08.092 ↗
5. Investigation of permeability of open graded asphalt mixture considering effects of anisotropy and two-dimensional flow10.1016/j.conbuildmat.2017.04.028 ↗
6. Material selections in asphalt pavement for wet-freeze climate zones: a review10.1016/j.conbuildmat.2018.11.276 ↗
7. Evaluation of pore structure and its influence on permeability and moisture damage in asphalt concrete10.1080/10298436.2015.1065995 ↗
8. Relationship of coefficient of permeability, porosity, and air voids in fine-graded HMA10.1061/(ASCE)MT.1943-5533.0002573 ↗
9. Modeling of transport and transformation processes in porous and multiphase bodies10.1016/S0065-2377(05)30003-2 ↗
10. Characterization of porous media using NMR methods10.1016/S0066-4103(00)41011-2 ↗
11. Drying of porous asphalt concrete investigated by X-ray computed tomography10.1016/j.phpro.2015.07.063 ↗
12. X-ray computed tomography in hydraulics of asphalt mixtures: procedure, accuracy, and application10.1016/j.conbuildmat.2016.01.032 ↗
13. Dynamic modulus simulation of the asphalt concrete using the X-ray computed tomography images10.1617/s11527-008-9408-4 ↗
14. Al Omari · 2004
15. An efficient method of generating and characterizing filter substrates for lattice boltzmann analysis10.1115/1.4038167 ↗
16. Bear · 1972
17. B. Huang, L.N. Mohammad, P. Chris Abadie. Fundamentals of penneability in aspbalt mixtures, In: The Annual Meeting of the Association of Asphalt Paving Technologist, 1999.
18. Pore-network extraction from micro-computerized-tomography images10.1103/PhysRevE.80.036307 ↗
19. Pore level imaging of fluid transport using synchrotron X-ray microtomography10.1016/S0920-4105(97)00035-1 ↗
20. Lattice Boltzmann method for fluid flows10.1146/annurev.fluid.30.1.329 ↗
21. Transition flow with an incompressible lattice boltzmann method10.4208/aamm.OA-2016-0103 ↗
22. Alternate and explicit derivation of the lattice Boltzmann equation for the unsteady incompressible Navier-Stokes equation
23. Krüger · 2017 · 694
24. Porous media flux sensitivity to pore-scale geostatistics: a bottom-up approach10.1016/j.advwatres.2017.02.002 ↗
25. Lattice-Boltzmann and finite-difference simulations for the permeability for three-dimensional porous media10.1103/PhysRevE.66.016702 ↗
26. Evaluation of permeability and non-Darcy flow in vuggy macroporous limestone aquifer samples with lattice Boltzmann methods10.1029/2011WR011788 ↗
27. Measuring physical and hydraulic properties of peat from X-ray tomography10.1016/j.geoderma.2009.08.010 ↗
28. Pore-scale simulations on relative permeabilities of porous media by lattice Boltzmann method10.1016/j.ijheatmasstransfer.2009.12.066 ↗
29. Calculation of the permeability in porous media using the lattice Boltzmann method10.1016/j.ijheatfluidflow.2016.05.010 ↗
30. Proposed methodology for predicting HMA permeability
31. Laboratory validation of lattice Boltzmann method for modeling pore-scale flow in granular materials10.1016/j.compgeo.2006.08.002 ↗
32. Lattice Boltzmann modeling of two-phase flow in macroporous media with application to porous asphalt
33. Hydrodynamic stability and turbulent transition with the Vreman LES SGS and a modified lattice Boltzmann equation10.1080/17797179.2018.1550380 ↗
34. Analytic solutions of simple flows and analysis of nonslip boundary conditions for the lattice Boltzmann BGK model10.1007/BF02181482 ↗
35. Pore scale inertial flow simulations in 3-D smooth and rough sphere packs using lattice Boltzmann method10.1002/aic.14232 ↗
36. Fiji: an open-source platform for biological-image analysis10.1038/nmeth.2019 ↗
37. Synchrotron X-ray microtomography and lattice Boltzmann simulations of gas flow through volcanic pumices10.1130/GES00555.1 ↗
38. MathWorks · 2016
39. Palabos Team · 2017
40. Micro-CT imaging and pore network extraction
41. ASTM · 2008
42. AASHTO · 2012
43. AASHTO · 2012
44. FM 5-565 · 2015
45. Netherlands Standards Institution, Bituminous mixtures – Test methods for hot mix asphalt – Part 19: Permeability of specimen, in EN 12697-19, 2012.
46. Three dimensional simulation of fluid flow in X-ray CT images of porous media10.1002/nag.389 ↗
47. J. Ahrens, B. Geveci, C. Law, Paraview: An end-user tool for large data visualization. The Visualization Handbook, 2005, pp. 717.10.1016/B978-012387582-2/50038-1 ↗