Influence of the contact area in the adherence of mortar – Ceramic tiles interface
Source abstract
Abstract
Abstract The detachment of ceramic tiles in buildings is a problem that still persists in several modern constructions, despite various advances achieved. In this work, the adhesion resistance was evaluated from the crack propagation test in a mixed mode of stress (MMF test), which simulates tensile and shear forces simultaneously. A punctual progressive load was applied to 120 specimens in order to evaluate the influence of several variables: type of adhesive mortar, mortar thickness and failure extension. The results show that the bonding strength at the interface decreases as the adhesive failure increases. The bonding strength values found by the direct-drive test were higher than the results obtained by the MMF test, indicating an overestimation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Infrastructure Maintenance and Monitoring · Concrete Corrosion and Durability · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Silva · 2003
2. Assessing the durability of mortar tiles - A contribution for a prediction model10.1016/j.engfailanal.2014.04.027 ↗
3. Costa · 2001
4. Service life prediction of ceramic tiling systems in Brasília-Brazil using the factor method10.1016/j.conbuildmat.2018.10.084 ↗
5. Reliability of the Pull-Off Test for In-Situ Evaluation of Adhesion Strength10.1016/j.conbuildmat.2011.12.097 ↗
6. Mapping defect sensitivity in external mortar renders10.1016/j.conbuildmat.2005.01.014 ↗
7. Air lime mortars for conservation of historic tiles: Bond strength of new mortars to old tiles10.1016/j.conbuildmat.2017.04.027 ↗
8. Ceramic tiling inspection system10.1016/j.conbuildmat.2008.02.007 ↗
9. Exterior cladding methods: a techno-economic analysis10.1061/(ASCE)0733-9364(1996)122:3(242) ↗
10. Environmental degradation of the interfacial fracture energy in an adhesively bonded joint10.1016/S0013-7944(02)00004-8 ↗
11. Mixed mode fracture characterization of GFRP-concrete bonded interface using four-point asymmetric end-notched flexure test10.1016/j.tafmec.2017.06.009 ↗
12. Predicting the residual strength for environmentally degraded adhesive lap joints10.1016/j.ijadhadh.2005.04.003 ↗
13. Long-term study on failure mechanisms of exterior applied tilings10.1016/j.conbuildmat.2012.07.072 ↗
14. The importance of the quality of sampling in service life prediction10.1016/j.conbuildmat.2014.05.045 ↗
15. Continuum damage modelling of environmental degradation in joints bonded with EA9321 epoxy adhesive10.1016/j.ijadhadh.2007.08.005 ↗
16. Damage modelling of adhesively bonded joints10.1007/s10704-006-0072-9 ↗
17. Jungiger · 2003
18. NBR 13755:2017, Ceramic tiling in building facades and external walls using adhesive mortar - Design, execution, inspection and acceptance - Procedure. Rio de Janeiro, Brazil.
19. NBR 13818:2007, Ceramic tiles - Specification and methods of test. Rio de Janeiro, Brazil
20. NBR ISO 4287:2008, Geometrical product especifications (GPS) - Surface texture: Prpfile method - Rules and procedures for the assessment of surface texture. Rio de Janeiro, Brazil
21. Surface roughness of ceramic tiles
22. NBR 14081:2012, Adhesive mortars industrialized for the settlement of ceramic tiles. Part 3: Determination of the open time. Rio de Janeiro, Brazil.
23. Effects of residual stresses on interfacial adhesion measurement10.1016/j.mechmat.2009.01.022 ↗
24. A.N.S. Nascimento, Effect of adhesive thickness on the resistance of simple overlap joints, on bonding composite materials, MSc. Thesis, Instituto Superior de Engenharia do Porto, Porto, Portugal, 2013.
25. Adherence of ceramic plates subjected to cyclic thermal variations, MSc. Thesis Universidade Federal da
26. Analysis and evaluation of bondline thickness effects on failure load in adhesively bonded structures10.1163/156856101317035503 ↗
27. Influence of sintering temperature of a ceramic substrate in mortar adhesion for civil construction10.1016/j.jobe.2018.05.026 ↗