Microscopic analysis and mechanical properties of Recycled Paper Mill Sludge modified asphalt mixture using granite and limestone aggregates
Source abstract
Abstract
Abstract As a developing nation that moves towards the sustainability, initiatives had been taken to address the solid waste disposal problem by incorporating them into asphalt pavement construction. This study integrates the recycled material named Recycled Paper Mill Sludge (RPMS) into the production of asphalt mixture as modifier through the partial substitution of mineral filler. The usage of solid waste material in pavement construction could substantially reduce the waste production and reduces the possibility of those waste materials ending up on landfills. This paper evaluates the microscopic analysis such as XRD, XRF and the mechanical properties of asphalt mixture with the incorporation of Recycled Paper Mill Sludge (RPMS). Mechanical properties that were evaluated were indirect tensile strength (ITS), moisture sensitivity, resilient modulus, Leutner shear and dynamic creep. RPMS was added to the asphalt mixture through dry process at the rate of 0.5% and 1%. Addition of RPMS at specific rate improved the mechanical properties such as resilient modulus, Leutner shear and dynamic creep of asphalt mixture. The lapped antenna like fibre of RPMS improved the resilient modulus of asphalt mixture by acting as a reinforcing material. Furthermore, RPMS contains calcite compounds that promote the adhesion bonding between asphalt binder and aggregates which significantly improved the performance in Leutner shear test and dynamic creep test.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Geotechnical and construction materials studies · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Review of sustainability, pretreatment, and engineering considerations of asphalt modifiers from the industrial solid wastes
2. Utilization of steel slag as aggregates for stone mastic asphalt (SMA) mixtures10.1016/j.buildenv.2006.06.008 ↗
3. Performance evaluation of utilization of waste Polyethylene Terephthalate (PET) in stone mastic asphalt10.1016/j.conbuildmat.2012.06.015 ↗
4. Mechanical performance of asphalt mixtures modified by bio-oils derived from waste wood resources10.1016/j.conbuildmat.2013.11.017 ↗
5. Impacts of recycled crumb rubber powder and natural rubber latex on the modified asphalt rheological behaviour, bonding, and resistance to shear10.1016/j.conbuildmat.2019.117357 ↗
6. Recycling of municipal solid waste incinerator ash in hot-mix asphalt concrete10.1016/j.conbuildmat.2004.05.010 ↗
7. Engineering and microscopic characteristics of natural rubber latex modified binders incorporating silane additive
8. Polymer modified asphalt binders10.1016/j.conbuildmat.2005.07.007 ↗
9. Environmental and mechanical performance of crumb rubber modified warm mix asphalt using Evotherm10.1016/j.jclepro.2017.04.168 ↗
10. Performance evaluation of rubberised asphalt mixes containing WMA additives10.1080/10298436.2016.1199874 ↗
11. Performance characterization of polymer modified asphalt binders and mixes
12. Rheological and mechanical performance of asphalt binders and mixtures incorporating CaCO3 and LLDPE
13. Using waste plastic bottles as additive for stone mastic asphalt10.1016/j.matdes.2011.06.016 ↗
14. Coal ash utilization in asphalt concrete mixtures10.1061/(ASCE)0899-1561(1999)11:4(295) ↗
15. The effect of recycled concrete aggregate and steel slag on the dynamic properties of asphalt mixtures10.1016/j.conbuildmat.2012.02.036 ↗
16. Utilization of recycled brick powder as alternative filler in asphalt mixture10.1016/j.conbuildmat.2010.08.005 ↗
17. T. Valentova, J. Sedina, J. Valentin, 2019. Is there Potential of Using Recycled Pulverized Admixtures in Asphalt Mixture as a Substitute for Limestone Filler? in Proceedings of Conference Asphalt Pavements.
18. Moisture damage resistance of hot-mix asphalt made with paper industry wastes as filler10.1016/j.jclepro.2015.06.016 ↗
19. Pulp and paper plant wastes valorisation in bituminous mixes10.1016/j.wasman.2009.11.005 ↗
20. A preliminary investigation into the physical and chemical properties of biomass ashes used as aggregate fillers for bituminous mixtures10.1016/j.wasman.2013.05.015 ↗
21. Feasibility study of BOF slag containing honeycomb particles in asphalt mixture10.1016/j.conbuildmat.2016.07.128 ↗
22. Effect of Coal Combustion Products on high temperature performance of asphalt mastics10.1016/j.conbuildmat.2015.07.022 ↗
23. Effect of Portland cement and lime additives on properties of cold in-place recycled mixtures with asphalt emulsion10.1016/j.conbuildmat.2008.07.020 ↗
24. Use of a warm mix asphalt additive to reduce the production temperatures and to improve the performance of asphalt rubber mixtures10.1016/j.jclepro.2012.09.047 ↗
25. Investigation of rutting performance of asphalt mixtures containing polymer modifiers10.1016/j.conbuildmat.2005.08.014 ↗
26. Laboratory fatigue models for recycled mixes with bitumen emulsion and cement10.1016/j.conbuildmat.2010.04.009 ↗
27. Physico-mechanical behavior of selfcementing class C fly ash–clay mixtures10.1016/j.fuel.2004.10.018 ↗
28. Effect of coal waste powder in hot mix asphalt compared to conventional fillers: mix mechanical properties and environmental impacts10.1016/j.jclepro.2014.11.078 ↗
29. Characterization of fly ash bituminous concrete mixes10.1061/(ASCE)MT.1943-5533.0000125 ↗
30. Laboratory investigation on the properties of asphalt concrete mixture with Rice Husk Ash as filler10.1016/j.conbuildmat.2016.09.070 ↗
31. Bagampadde · 2004
32. I. Ishai, J. Craus, Effect of the filler on aggregate-bitumen adhesion properties in bituminuos mixtures. Association of Asphalt Paving Technologists Proceedings, 1977. 47.
33. J. Craus, I. Ishai, A. Sides, Some physico-chemical aspects of the effect and the role of the filler in bituminous paving mixtures. Association of Asphalt Paving Technologists Proceedings, 1978. 47.
34. Mechanical, durability and microstructure properties of Cold Asphalt Emulsion Mixtures with different types of filler10.1016/j.conbuildmat.2016.03.112 ↗
35. Laboratory investigation of the performances of cement and fly ash modified asphalt concrete mixtures10.1016/j.ijprt.2016.08.002 ↗