journal article·2020-07

Impact of using different amounts of polyolefin macro fibers on fracture behavior, size effect, and mechanical properties of self-compacting lightweight concrete

Mohammad Karamloo, Oveys Afzali-Naniz, Alireza Doostmohamadi

Publisher page

Abstract

Abstract In this paper, the effect of polyolefin macro fibers on fracture, fresh and hardened state properties of self-compacting lightweight concrete (SCLC) has been assessed. To do so, four SCLC mixes have been cast such that the solid contents and water to binder ratio have been kept constant while the volume fraction of fiber contents varied from 0.0% to 0.5% by concrete volume. Moreover, to evaluate the effect of size on fracture parameters and nominal strength of the beams, three different sizes of specimens were considered such that they have been kept geometrically similar. The experimental results showed that the fiber contents have negligible effects on mechanical properties of SCLC. However, the post peak behavior of the specimen was affected by the amount of fiber contents. The so-called universal size-shape effect law was adopted successfully to indicate the effects regarding the size of the specimens on their nominal strength. Besides, the fracture energy and fracture toughness of the mixes showed almost no size dependency, especially for characteristic dimensions higher than 100 mm.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Concrete Properties and Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Mazloom · 2019 · 135
2. An efficient algorithm for scaling problem of notched beam specimens with various notch to depth ratios
3. Effect of size on nominal strength of self-compacting lightweight concrete and self-compacting normal weight concrete: a stress-based approach10.1016/j.mtcomm.2017.08.002 ↗
4. Effect of silica fume and polyepoxide-based polymer on electrical resistivity, mechanical properties, and ultrasonic response of SCLC
5. Effects of maximum aggregate size on fracture behaviors of self-compacting lightweight concrete10.1016/j.conbuildmat.2016.07.061 ↗
6. M. Karamloo, M. Mazloom, G. Payganeh, Influences of water to cement ratio on brittleness and fracture parameters of self-compacting lightweight concrete. Eng. Fract. Mech. 2016, 168, Part A:227-41.10.1016/j.engfracmech.2016.09.011 ↗
7. Residual mechanical properties of polypropylene fiber-reinforced concrete after heating10.1016/j.conbuildmat.2018.11.209 ↗
8. Acoustic Emission behavior of thermally damaged Self-Compacting High Strength Fiber Reinforced Concrete10.1016/j.conbuildmat.2018.07.156 ↗
9. Flexural behavior and durability properties of high performance hybrid-fiber-reinforced concrete10.1016/j.conbuildmat.2018.06.158 ↗
10. The mechanical and durability properties of concrete containing hybrid synthetic fibers10.1016/j.conbuildmat.2018.05.145 ↗
11. Size effect study on compressive strength of SCLC
12. The relationship between fracture toughness and compressive strength of self-compacting lightweight concrete. IOP Conference Series
13. Effect of magnetic-field intensity on fracture behaviors of self-compacting lightweight concrete
14. Effects of colloidal nano-silica on fresh and hardened properties of self-compacting lightweight concrete10.1016/j.jobe.2018.08.014 ↗
15. Assessment of the influence of micro- and nano-silica on the behavior of self-compacting lightweight concrete using full factorial design
16. Customizing well-known sustainability assessment tools for Iranian residential buildings using Fuzzy Analytic Hierarchy Process10.1016/j.buildenv.2017.11.032 ↗
17. Impact of Daylighting Design Strategies on Social Sustainability Through the Built Environment10.1002/sd.1675 ↗
18. Effects of silica fume, superplasticizer dosage and type of superplasticizer on the properties of normal and self-compacting concrete
19. ASTM · 2012
20. A study on the efficiency of steel vs. synthetic vs. hybrid fibers on fracture behavior of concrete in flexure using acoustic emission10.1016/j.conbuildmat.2018.12.011 ↗
21. Improvements in fracture behavior and shear capacity of fiber reinforced normal and self consolidating concrete: A comparative study10.1016/j.conbuildmat.2018.08.194 ↗
22. Fresh and rheological properties of glass fiber reinforced self-compacting concrete with nanosilica and fly ash blended10.1016/j.conbuildmat.2019.03.087 ↗
23. Studying the fracture parameters and size effect of steel fiber-reinforced self-compacting concrete10.1016/j.conbuildmat.2018.12.172 ↗
24. FMC-50. Determination of the fracture energy of mortar and concrete by means of three-point bend tests on notched beams10.1007/BF02472918 ↗
25. Size dependence of concrete fracture energy determined by RILEM work-of-fracture method10.1007/BF00033974 ↗
26. Size effect in normal- and high-strength amorphous metallic and steel fiber reinforced concrete beams10.1016/j.conbuildmat.2016.06.040 ↗
27. British standard istitution. Cement - Part 1: Composition, specifications and conformity criteria for common cements. BS EN 197-1,. London: BSI, 2011.
28. Size effect in ultra-high-performance concrete beams10.1016/j.engfracmech.2016.02.009 ↗
29. Size Effects in Flexural Toughness of Fiber Reinforced Concrete
30. Universal size-shape effect law based on comprehensive concrete fracture tests10.1061/(ASCE)EM.1943-7889.0000627 ↗
31. EFNARC. Specification & guidlines for self-compacting concrete, English ed. European federation for specialist construction chemicals and concrete systems Norfolk, UK. 2002.
32. BS EN 12390 p. Testing hardened concrete, method of determination of compressive strength of concrete cubes. part 3: British standards institution, 2000.
33. ASTM C 469. Standard test methods for static modulus of elasticity and poisson's ratio of concrete in compression. American Society of Testing Materials, 2002.
34. ASTM C 496. Standard test method for splitting tensile strength of cylinderical concrete specimens.: American Society of Testing Materials, 2002.
35. The theoretical basis of a method to determine the fracture energyG F of concrete10.1007/BF02472919 ↗
36. T.L. Anderson, Fracture mechanics: fundamantals and applications. 6000 Broken Sound Parkway NW, Suite 300, Boca Raton, FL 33487-2742: Taylor & Francis, 2005.
37. Mazloom · 2016
38. FMT-89. Size-effect method for determining fracture energy and process zone size of concrete10.1007/BF02472030 ↗
39. Influence of fibers on drying shrinkage in restrained concrete10.1016/j.conbuildmat.2017.05.093 ↗