Volume change and compressive strength of an alluvial soil stabilized with butyl acrylate and styrene
Source abstract
Abstract
Abstract The volume change and uniaxial compressive strength of an alluvial soil stabilized with co-polymer of Butyl Acrylate and Styrene (CBAS) are presented in this paper. CBAS has low viscosity improving its adsorption into the soil microstructure and its ionic structure helps the formation of electrostatic bonding within the clay fabric. CBAS can be applied with ease by directly mixing or spraying onto soils, which potentially makes it favorable for use in compacted fills. Treatment of soil specimens with CBAS indicated significant improvement in the shrinkage and compressibility characteristics with just a percentage addition of 5% by dry mass of soil. On the other hand, obtaining an improvement in the swelling behaviour required at least a 10% addition of CBAS. The secondary compression rate and the uniaxial compressive strength are improved significantly even at very low percentages of treatment. Microstructural changes in the soil fabric are observed with the use of scanning electron microscopy, which indicated that CBAS-soil interaction can be achieved effectively by wet mixing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Geotechnical Engineering and Soil Stabilization · Grouting, Rheology, and Soil Mechanics · Polymer-Based Agricultural Enhancements
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Lime pile techniques for the improvement of clay soils10.1139/cgj-2014-0073 ↗
2. Properties of polymer-modified mortars using epoxy and acrylic emulsions10.1016/j.conbuildmat.2005.08.007 ↗
3. O. Akay, A.T. Özer, G.A. Fox, Experimental investigation of failure mechanism of expanded polystyrene block geofoam slope system under seepage, in: European geosynthetics congress, EuroGeo5, 2012, pp. 16–19.
4. Experimental investigation of epoxy resin and sand mixes10.1061/(ASCE)GT.1943-5606.0000648 ↗
5. ASTM D2166/D2166M-16, Standard Test Method for Unconfined Compressive Strength of Cohesive Soil, ASTM International, West Conshohocken, PA, 2016, doi: 10.1520/D2166_D2166M-16.10.1520/D2166_D2166M-16 ↗
6. ASTM D2435/D2435M-11, Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading, ASTM International, West Conshohocken, PA, 2011, doi: 10.1520/D2435_D2435M-11.10.1520/D2435_D2435M-11 ↗
7. ASTM D2487-17, Standard practice for classification of soils for engineering purposes (Unified Soil Classification System). ASTM International, West Conshohocken, PA, 2017, doi: 10.1520/D2487-17.10.1520/D2487-17 ↗
8. ASTM D4318-17e1, Standard test methods for liquid limit, plastic limit and plasticity index of soils. ASTM International, West Conshohocken, PA, 2017, doi: 10.1520/D4318-17E01.10.1520/D4318-17E01 ↗
9. ASTM D4373-02, Standard Test Method for Rapid Determination of Carbonate Content of Soils, ASTM International, West Conshohocken, PA, 2002, doi: 10.1520/D4373-02.10.1520/D4373-02 ↗
10. ASTM D4546-14e1, Standard Test Methods for One-Dimensional Swell or Collapse of Soils. ASTM International, West Conshohocken, PA, 2014, doi: 10.1520/D4546-14E01.10.1520/D4546-14E01 ↗
11. ASTM D698-12e2, Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3). ASTM International, West Conshohocken, PA, 2012, http://www.astm.org/cgi-bin/resolver.cgi?D698-12e2.
12. A.T.S. Azhar, M.I.S. Fazlina, Z.M. Nizam, Y.M. Fairus, M.N.A. Hakimi, Y. Riduan, P. Faizal, Shear Strength of stabilized kaolin soil using liquid polymer, in: IOP Conference Series: Materials Science and Engineering, vol. 226, no. 1, IOP Publishing, 2017, p. 012063, doi: 10.1088/1757-899X/226/1/012063.10.1088/1757-899X/226/1/012063 ↗
13. The effects of waste marble dust and polypropylene fiber contents on mechanical properties of gypsum stabilized earthen10.1016/j.conbuildmat.2016.12.172 ↗
14. Properties of fly ash concrete modified with hydrated lime and silica fume10.1016/j.conbuildmat.2009.06.001 ↗
15. Swelling-shrinkage behavior of natural expansive clays10.1016/S0169-1317(96)00009-9 ↗
16. H. Bilsel, E. Uygar, N.C. Gazimagusa, The effect of repeated wetting-drying on the hydraulic properties of Konnos clay, in: Proceedings of the 53rd Canadian Geotechnical Conference, 2000.
17. Effects of ground granulated blastfurnace slag (GGBS) on the swelling properties of lime-stabilized sulfate-bearing soils10.1016/j.enggeo.2013.05.016 ↗
18. Use of class c fly ashes for the stabilizationof an expansive soil10.1061/(ASCE)1090-0241(2001)127:7(568) ↗
19. Stabilization of expansive clays using granulated blast furnace slag (GBFS) and GBFS-cement10.1007/s10706-008-9250-z ↗
20. Compressibility behaviour of natural and stabilized dredged soils in different organic matter contents10.1016/j.conbuildmat.2019.116787 ↗
21. Duncan · 1976
22. Effect of resin on the strength of soil-cement mixture10.1061/(ASCE)MT.1943-5533.0000252 ↗
23. Interpretation of soil-water characteristic curves when volume change occurs as soil suction is changed10.1201/b14393-4 ↗
24. Clay-based composite stabilized with natural polymer and fibre10.1016/j.conbuildmat.2010.01.008 ↗
25. Improvement of internal stability of alluvial clay from famagusta bay, cyprus, using copolymer of butyl acrylate and styrene10.2113/EEG-2205 ↗
26. Impact of cyclic wetting–drying on swelling behavior of lime-stabilized soil10.1016/j.buildenv.2005.10.035 ↗
27. Compressibility and saturated hydraulic permeability of clay-polymer composites—experimental and theoretical analysis10.1016/j.clay.2016.01.020 ↗
28. Some engineering geological effects of drought: examples from the UK10.1007/s10064-013-0458-7 ↗
29. Anionic polyacrylamide polymers effect on rheological behavior of sodium-montmorillonite suspensions
30. H. Huang, L. Liu, Application of water-soluble polymers in the soil quality improvement, in: International Conference On Civil Engineering and Urban Planning 2012, August 18––20, Yantai, China, 2012, doi: 10.1061/9780784412435.022.10.1061/9780784412435.022 ↗
31. Stabilizing sulfate-rich high plasticity clay with moisture activated polymerization10.1016/j.enggeo.2016.07.007 ↗
32. Aqueous polymer effects on volumetric swelling of Na-montmorillonite10.1061/(ASCE)0899-1561(2007)19:1(84) ↗
33. Pavement subgrade stabilization using polymers: characterization and performance10.1061/(ASCE)MT.1943-5533.0000612 ↗
34. Impact of wetting–drying cycles on swelling behavior of clayey soils modified by silica fume10.1016/j.clay.2011.03.014 ↗
35. Improving mechanical properties of sand using biopolymers10.1061/(ASCE)GT.1943-5606.0000861 ↗
36. Effect of new soil stabilizers on the compressive strength of dune sand10.1016/S0950-0618(98)00024-5 ↗
37. A micro-mechanical approach to swelling behavior of unsaturated expansive clays under controlled drainage conditions10.1016/j.clay.2008.09.004 ↗
38. Fly ash incorporated with biocement to improve strength of expansive soil10.1038/s41598-018-20921-0 ↗
39. Analysis of the effect of freeze–thaw cycles on the degradation of mechanical parameters and slope stability10.1007/s10064-017-1013-8 ↗
40. Mechanisms of superhydrophobicity on hydrophilic substrates
41. Improvement of water-stability of clay aggregates admixed with aqueous polymer soil stabilizers10.1016/j.catena.2008.12.016 ↗
42. Research on the stabilization treatment of clay slope topsoil by organic polymer soil stabilizer10.1016/j.enggeo.2010.10.011 ↗
43. Topsoil reinforcement of sandy slope for preventing erosion using water-based polyurethane soil stabilizer10.1016/j.enggeo.2019.03.003 ↗
44. Stabilization of expansive soil using cementing material from rice husk ash and calcium carbide residue10.1016/j.conbuildmat.2019.05.157 ↗
45. Soil stabilization by chemical agent10.1007/s10706-012-9549-7 ↗
46. Use of polymers and biopolymers for water retaining and soil stabilization in arid and semiarid regions10.1016/S1658-3655(12)60022-3 ↗
47. The role of clay swelling and mineral neoformation in the stabilization of high plasticity soils treated with the fly ash-and metakaolin-based geopolymers10.3390/min8040146 ↗
48. J.K. Mitchell, The fabric of natural clays and its relation to engineering properties, in: Highway Research Board Proceedings, vol. 35, 1956.
49. Effect of wet and dry conditions on strength of silty sand soils stabilized with epoxy resin polymer10.3923/jas.2010.2839.2846 ↗
50. Effectiveness of class C fly ash as an expansive soil stabilizer10.1016/j.conbuildmat.2004.03.011 ↗
51. Improvement of calcareous expansive soils in semi-arid environments10.1006/jare.2000.0726 ↗
52. Utilization of an industrial waste in calcareous expansive clay stabilization10.1520/GTJ11082J ↗
53. Compressibility and hydraulic conductivity of a chemically treated expansive clay
54. Use of synthetic polymers and biopolymers for soil stabilization in agricultural, construction, and military applications10.1061/(ASCE)0899-1561(2007)19:1(58) ↗
55. M. Popescu, Behaviour of expansive soils with a crumb structure, in: Proc. of the 4th Int Conf. on Expansive Soils, vol. 1, 1980, pp. 158–171.
56. Effect of liquid polymeric and lime additives on the behavior of fine-grained soil at unfrozen and freeze-thaw conditions10.1007/s40098-017-0274-2 ↗
57. M.A. Stroud, F.G. Butler, The standard penetration test and the engineering properties of glacial materials, in: Proceedings of the Symposium on Engineering Properties of Glacial Materials, Midlands, U.K., 1975.
58. Stabilization mechanisms of nontraditional additives10.3141/1989-49 ↗
59. Effect of cyclic wetting and drying on swelling behavior of polymer-stabilized expansive clays10.1016/j.clay.2010.09.006 ↗
60. Experimental study of the feasibility of using anhydrous sodium metasilicate as a geopolymer activator for soil stabilization10.1016/j.enggeo.2019.105316 ↗