Properties of bio-based controlled low strength materials
Source abstract
Abstract
Abstract This study investigates the feasibility of enhancing construction materials sustainability using bio-based by-products as a partial replacement for natural sand. Controlled low strength material (CLSM) was selected as a practical application, thanks to its low strength requirements. The fine black spruce residual was added to different strength levels CLSM mixtures at rates 0%, 5%, 10%, and 20% as a partial replacement of natural sand. Fresh and hardened properties, including flowability, bleeding, density, compressive and tensile strengths, were evaluated. CLSM mixtures incorporating fine black spruce residuals were exposed to sulfate environment to examine their durability. The experimental results demonstrate that adding spruce-residuals had reduced the compressive strength; however, this reduction was within the acceptable limit. Moreover, results indicated that mixtures with high cement content could incorporate >20% spruce-residuals while maintaining adequate performance. The fine spruce-residuals have some filling effect and can reduce the pores leading to lower absorption rates. Dry/wet cycles will adversely affect the volume stability of CLSM, forming wide cracks that, in turn, accelerate degradation. Producing CLSM for farm applications is a feasible method for reusing such waste.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Materials Engineering and Processing · Additive Manufacturing and 3D Printing Technologies · biodegradable polymer synthesis and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. ACI Committee 229, Report on Controlled Low-Strength Materials. American Concrete Institute: Farmington Hills, USA, 2013. p. 26p.
2. Engineering properties of controlled low-strength materials containing waste oyster shells10.1016/j.conbuildmat.2013.04.020 ↗
3. Engineering properties of controlled low-strength materials containing treated oil sand waste10.1016/j.conbuildmat.2017.10.093 ↗
4. J.L. Hitch, Test methods for controlled low-strength material (CLSM): past, present, and future, in: A.K. Howard, J.L. Hitch (Eds.), The Design and Application of Controlled Low-Strength Materials (Flowable Fill), ASTM STP 1331, American Society for Testing and Materials, 1998. pp. 3–10.10.1520/STP13058S ↗
5. Properties of controlled low strength material containing foundry sand
6. Controlled low strength materials
7. Controlled low-strength material
8. R.L. Larsen, Use of controlled low-strength materials in iowa, Concr. Int. 10(7) (1988) 22–23.
9. J.E. Steinmanis, Underground cable thermal backfill, in: Proceedings of the Symposium on Underground Cable Thermal Backfill, Toronto, ON, Canada, Sept., 1981.
10. Flowable fly ash
11. T.R. Naik, B.W. Ramme, H.J. Kolbeck, Filling abandoned underground facilities with CLSM fly ash slurry, Concr. Int. 12(7) (July 1990) 19–25.
12. Strengthening of CMU Wall through grouting
13. Modification of Bridges with CLSM
14. D.D. Gray, T.P. Reddy, D.C. Black, P.F. Ziemkiewicz, Filling abandoned mines with fluidized bed combustion ash grout, in: A.K. Howard, J.L. Hitch (Eds.), The Design and Application of Controlled Low-Strength Materials (Flowable Fill), ASTM STP 1331, ASTM International, West Conshohocken, PA, 1998, pp. 180–193.10.1520/STP13071S ↗
15. Global perspective on application of controlled low-strength material (CLSM) for trench backfilling – an overview10.1016/j.conbuildmat.2017.10.050 ↗
16. Waste resources recycling in controlled low-strength material (CLSM): a critical review on plastic properties10.1016/j.jenvman.2019.03.017 ↗
17. Crushing characteristics of a recycled aggregate from waste concrete10.1016/j.conbuildmat.2017.11.036 ↗
18. Sustainable design of pervious concrete using waste glass and recycled concrete aggregate10.1016/j.jclepro.2019.06.260 ↗
19. Sustainable approach for recycling treated oil sand waste in concrete: engineering properties and potential applications10.1016/j.jclepro.2018.08.349 ↗
20. Properties of controlled low-strength materials incorporating cement kiln dust and slag10.1016/j.cemconcomp.2010.07.011 ↗
21. Properties of controlled low-strength material made using industrial waste incineration bottom ash and quarry dust10.1016/j.matdes.2011.07.014 ↗
22. A new sustainable composite column using an agricultural solid waste as aggregate10.1016/j.jclepro.2016.04.072 ↗
23. The effects of using agricultural waste as partial substitute for sand in cement blocks10.1016/j.jobe.2018.04.023 ↗
24. Agricultural wastes as aggregate in concrete mixtures – a review10.1016/j.conbuildmat.2013.11.074 ↗
25. The effects of by-products incorporated in low-strength concrete for concrete masonry units10.1016/j.conbuildmat.2017.07.086 ↗
26. Agricultural waste concept, generation, utilization and management10.4314/njt.v35i4.34 ↗
27. Oil palm shell as a lightweight aggregate for production high strength lightweight concrete10.1016/j.conbuildmat.2010.11.075 ↗
28. Concrete using agro-waste as fine aggregate for sustainable built environment – a review10.1016/j.ijsbe.2016.06.003 ↗
29. E. Aprianti, P. Shafigh, S. Bahri, J.N. Farahani, Supplementary cementitious materials origin from agricultural wastes – a review, Constr. Build. Mater. 7415 (January 2015) 176–187.10.1016/j.conbuildmat.2014.10.010 ↗
30. S. Gupta, S. Chaudhary, State of the artreviewonsupplementarycementitiousmaterialsin India – I: an overview of legal perspective, governing organizations, and development patterns, J. Cleaner Prod. 261 (2020).10.1016/j.jclepro.2020.121203 ↗
31. Incorporation of natural waste from agricultural and aquacultural farming as supplementary materials with green concrete: a review10.1016/j.compositesb.2019.107076 ↗
32. Growth and basic wood properties of black spruce along an alti-latitudinal gradient in Quebec, Canada10.1007/s13595-014-0399-8 ↗
33. Particle board made from hammer milled black spruce bark residues10.1007/s002260050003 ↗
34. Characteristics of controlled low-strength materials incorporating cement kiln dust10.1139/l06-136 ↗
35. Rheological properties of cementitious materials containing mineral admixtures10.1016/j.cemconres.2004.11.002 ↗
36. R.J. McLaren, N.J. Balsamo, Fly Ash Design Manual for Road and Site Applications, Vol. 2: Slurried Placement. Research Report No. CS-4419, Electric Power Research Institute, 1986.
37. Development of controlled low-strength material derived from beneficial reuse of bottom ash and sediment for green construction10.1016/j.conbuildmat.2014.04.087 ↗
38. Engineering properties of controlled low strength material (CLSM) incorporating red mud10.1186/s40703-016-0022-y ↗
39. Utilization of industrial by-products for the production of controlled low strength materials (CLSM)10.1016/S0956-053X(03)00134-X ↗
40. A. Raavi, Design of Controlled Low Strength Material for bedding and backfilling using high plasticity clay. M.S. Thesis, The University of Texas at Arlington, 2012, p. 134.
41. Determination of cement hydration and pozzolanic reaction extents for fly-ash cement pastes10.1016/j.conbuildmat.2011.07.007 ↗
42. The influence of organic and mineral additives on hydration of cement
43. Laboratory characterization of controlled low-strength materials10.1016/j.matdes.2014.10.012 ↗
44. Effect of fine particles on strength and stiffness of cement treated sand
45. T.H. Panzera, A.L. Christoforo, F.P. Cota, P.H.R. Borges, C.R. Bowen, Ultrasonic pulse velocity evaluation of cementitious materials, Adv. Compos. Mater.–Anal. Nat. Man-Made Mater. 412–437.
46. Ultrasonic speed wave: cure type influence on wood-cement composite compression strength
47. New approach for proportioning of controlled low strength materials10.1016/j.conbuildmat.2018.12.041 ↗
48. K. Wesche, Fly Ash in Concrete: Properties and Performance, CRC Press, 1991.10.1201/9781482267051 ↗
49. E. Aydin, Sulphate resistance of high volume fly ash cement paste composites, 2009.10.1201/9781439828403.ch13 ↗
50. Evaluation the performance of controlled low strength material made of excess excavated soil10.1016/j.jclepro.2018.12.171 ↗