journal article·2020-11

Comparison of performance-based specification properties for asphalt binders sourced from around the world

Kristjan Lill, Ahmad Nawaz Khan, Karli Kontson, Simon A.M. Hesp

Publisher page

Abstract

Abstract This paper documents and discusses performance-based specification properties of 36 asphalt binders. Materials were obtained from commercial sources and purposely distilled from Alberta oil sands crude oils (Athabasca, Cold Lake). Binders were evaluated according to regular Superpave™ specifications, Fraass test, and enhanced protocols based on limiting phase angles and complex moduli. From an overall performance perspective, sol-type binders made from Athabasca and Cold Lake, Alberta and Laguna, Venezuela crudes outperform gel-type ones made from Chinese, Indian, Kuwaiti, Russian, and South Korean sources. Good amounts of asphaltenes together with low wax contents appear to be critical for the production of high quality and durable asphalt binders.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Petroleum Processing and Analysis · Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. European Committee for Standardization, EN 12591 - Bitumen and bituminous binders. Specifications for paving grade bitumens, 2009.
2. European Committee for Standardization, EN 14023 - Bitumen and bituminous binders - Framework specification for polymer modified bitumens, 2010.
3. European Committee for Standardization, FprEN 12591 - Bitumen and bituminous binders. Specifications for paving grade bitumens, 2017.
4. European Committee for Standardization, prEN 14023 - Bitumen and bituminous binders - Specification framework for polymer modified bitumens, 2020.
5. B. Eckmann, M. Maze, Y. Le Hir, O. Harders and G. Gauthier. Checking low temperature properties of polymer modified bitumen - is there a future for the Fraass breaking point? In: Proceedings, Third Eurasphalt and Eurobitumen Congress, Vienna, 2004.
6. Migliori · Etude Statistique de Quelques cas de Fissurations Thermiques. In: Proceedings, Fifth Eurobitume Congress · 1993 · 1 · 724
7. Effect of Oxidation Pressure on Asphalt Hardening Susceptibility10.3141/1661-16 ↗
8. Binder Characterization and Evaluation
9. The Development of the Bending Beam Rheometer: Basics and Critical Evaluation of the Rheometer. In: Physical Properties of Asphalt Cement Binders
10. Ontario Ministry of Transportation, LS-308 Determination of Performance Grade of Physically Aged Asphalt Cement Using Extended Bending Beam Rheometer (BBR) Method, 2007.
11. Reversible Aging in Asphalt Binders10.1021/ef060463b ↗
12. S.A.M. Hesp, S.N. Genin, D. Scafe, H.F. Shurvell, S. Subramani. Five Year Performance Review of a Northern Ontario Pavement Trial: Validation of Ontario’s Double-Edge-Notched Tension (DENT) and Extended Bending Beam Rheometer (BBR) Test Methods. In: Proceedings, Canadian Technical Asphalt Association, 2009.
13. Non-isothermal kinetic analysis of reversible aging in asphalt cement10.1080/14680629.2017.1389070 ↗
14. The colloidal nature of asphalt as shown by its flow properties10.1021/j150378a005 ↗
15. A. Brown, J. Sparks and F. Smith. Steric hardening of asphalts. In: Proceedings, Association of Asphalt Paving Technologists, 1957.
16. P. Blokker and H. Van Hoorn. Durability of bitumen in theory and practice. In: Proceedings, Fifth World Petroleum Congress, 1959.
17. K. Lill, K. Kontson, A. Khan, P. Pan and S. Hesp. Comparison of Physical and Oxidative Aging Tendencies for Canadian and Northern European Asphalt Binders. In: Proceedings of 64th Canadian Technical Asphalt Association Annual Conference, Montreal, 2019.
18. Correlation between the thermal stress cracking of bituminous mixes and the binders' rheological characteristics
19. I. Widyatmoko, R. Elliott, M. Heslop and J. Williams. Ageing characteristics of some low penetration grade binders. In: Proceedings of the Fourth European Symposium, Bitmat4, Nottingham, 2002.
20. I. Widyatmoko, E. R.C. and M. Heslop. Mapping crack susceptibility of bituminous materials with binder durability. In: Fifth International RILEM Conference on Reflective Cracking in Pavements, Limoges, 2004.
21. I. Widyatmoko, M. Heslop and R. and Elliott. The Viscous to Elastic Transition Temperature and the In Situ Performance of Bituminous and Asphaltic Materials. Journal of the Institute of Asphalt Technology and Asphalt Professional No 14, pp. 3-7, 2005.
22. Asphalt cement loss tangent as a surrogate performance indicator for control of thermal cracking10.3141/2126-05 ↗
23. Oxidative and thermoreversible aging effects on performance-based rheological properties of six Latin American asphalt binders10.1021/acs.energyfuels.8b03265 ↗
24. Preliminary experience with improved asphalt cement specifications in the City of Kingston, Canada10.1016/j.conbuildmat.2017.09.118 ↗
25. Highway and Transportation Officials, AASHTO T 240, Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven
26. Highway and Transportation Officials, AASHTO R28, Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel
27. 2010
28. N. McLeod. A 4-Year Survey of Low Temperature Transverse Pavement Cracking on Three Ontario Test Roads. In: Proceedings, Association of Asphalt Paving Technologists, 1972.
29. European Committee for Standardization, EN 12593 - Bitumen and bituminous binders - Determination of the Fraass breaking point, 2015.
30. Repeatability, reproducibility, and sensitivity assessments of thermal and fatigue cracking acceptance criteria for asphalt cement
31. S. Hesp and S. Subramani. Another look at the bending beam rheometer for the specification grading of asphat cement. In: Proceedings, Sixth International Conference on Maintenance and Rehabilitation of Pavements and Technological Control, MAIREPAV6, Torino, 2009.
32. Investigation of two Warm Mix Asphalt additives10.1016/j.ijprt.2016.02.001 ↗