journal article·2020-12

Flame retardancy of particleboards made from oil palm trunk-poly(vinyl) alcohol with citric acid and calcium carbonate as additives

Madihan Yusof, Junidah Lamaming, Rokiah Hashim, Mohd Firdaus Yhaya, Othman Sulaiman, Mohd Ezwan Selamat

Publisher page

Abstract

Abstract Flame retardant particleboards from oil palm trunk particles were made by treatment with sodium chloride solution, then bonded with poly(vinyl) alcohol together with citric acid and calcium carbonate as additives. Flame retardancy, thermal, physical, and mechanical properties were evaluated for suitability as construction materials. The novel flame-retardant oil palm trunk particleboard was successfully produced. Treated oil palm trunk with 20% of poly(vinyl) alcohol and 10% of calcium carbonate showed the highest limited oxygen index (LOI) with good thermal stability and potential to be used as flame-retardant particleboard. Also, salt pre-treatment was found to enhance the flame retardancy of particleboard.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Flame retardant materials and properties · Lignin and Wood Chemistry

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Celullose nanocrystal isolated from oil palm trunk10.1016/j.carbpol.2015.03.043 ↗
2. An overview of the oil palm industry in Malaysia and its waste utilization through thermochemical conversion, specifically via liquefaction10.1016/j.rser.2015.05.085 ↗
3. Treatments of plant biomass for cementitious building materials – A review10.1016/j.conbuildmat.2016.05.125 ↗
4. Influence of curing regimes on mechanical properties of magnesium oxychloride cement-based composites10.1016/j.conbuildmat.2015.10.205 ↗
5. Flame-retardant poly(vinyl) alcohol membrane with high transparency based on a reactive phosphorus-containing compound
6. Preparation of glutinous rice starch/poly(vinyl) alcohol copolymer electrospun fibers for using as a drug deliver carrier
7. Surface modification of chitin and chitosan with poly(3-hexylthiophene) via oxidative polymerization10.1016/j.apsusc.2017.10.197 ↗
8. Mechanical properties of reactively flame-retardant cyanate ester/epoxy resin blends and their carbon reinforced composites10.3144/expresspolymlett.2016.94 ↗
9. Textile finishing with biomacromolecules: a low environmental impact approach in flame retardancy, the impact and prospects of green chemistry for textile technology
10. Influence of particle size and addition of recycling phenolic foam on mechanical and flame retardant properties of wood-phenolic composites10.1016/j.conbuildmat.2018.01.173 ↗
11. The sound by broadband acoustic resonance dissolution spectroscopy10.1016/j.foodres.2018.09.044 ↗
12. Evaluation of rheological behavior of starch nanocrystals by acid hydrolysis and starch nanoparticles by self-assembly: A comparative study10.1016/j.foodhyd.2015.09.010 ↗
13. Effect of flame retardant treatment on dimensional stability and thermal degradation of wood10.1016/j.conbuildmat.2014.10.037 ↗
14. Recent development in binderless fiber-board fabrication from agricultural residues: A review10.1016/j.conbuildmat.2019.03.279 ↗
15. Mechanism of waste biomass pyrolysis: Effect of physical and chemical pre-treatments10.1016/j.scitotenv.2015.07.076 ↗
16. Ionic liquids pre-treatment for fabrication of agro residue/ thermoplastic starch based composites: A comparative study with other pre-treatment technologies10.1016/j.jclepro.2017.05.110 ↗
17. Effects of coating with calcite together with various fire retardants on the fire properties of particleboard
18. Effect of calcium carbonate on preparation and mechanical properties of wood/ plastic composite
19. Flexural and impact properties of POM/EVA/HDPE blends and POM/EVA/HDPE/nano-CaCO3 composites10.1007/s00289-015-1314-7 ↗
20. Effect of nanoclay, talcum, and calcium carbonate as filler on properties of composites manufactured from recycled polypropylene and rubberwood fiber10.1016/j.conbuildmat.2017.12.048 ↗
21. Surface modification of ammonium polyphosphate-diatomaceous earth composite filler and its application in flame-retardant paper10.1007/s10973-015-4941-1 ↗
22. Flame retardant treatments of insulating agro-materials from flax short fibers10.1016/j.polymdegradstab.2013.02.002 ↗
23. Properties of hibiscus cannabinus and elaeis guineesis frond fibers eco-composite boards
24. Preparation and characterization of fire retardant straw/magnesium cement composites with an organic-inorganic network structure10.1016/j.conbuildmat.2018.03.111 ↗
25. JIS A 5908-2003 Particleboards, Japanese Standard Association, Tokyo, Japan.
26. ASTM D 2863: 2008, Annual Book of ASTM Standards, American Society for Testing Materials, Conshohocken, PA, 2008
27. Hatakeyama · 1999
28. Preparation and characterization of bioplastic-based green renewable composites from tapioca with acetyl tributyl citrate as a plasticizer10.3390/ma7085617 ↗
29. An Empirical Method for Estimating the Degree of Crystallinity of Native Cellulose Using the X-Ray Diffractometer10.1177/004051755902901003 ↗
30. A novel particleboard using unsaturated polyester resin as a formaldehyde-free adhesive10.1016/j.conbuildmat.2017.04.203 ↗
31. Comparative study of oil palm trunk and rice husk fillers in gypsum composite for building material10.1016/j.conbuildmat.2018.11.003 ↗
32. Effectiveness of pre-treated wood particles and halogen-free flame retardants used in wood-plastic composites10.1016/j.polymdegradstab.2016.01.016 ↗
33. Synthesis, applications, and flame-retardant mechanism of a novel phosphorus-containing plasticizer based on castor oil for polyvinyl chloride10.1007/s10973-015-4540-1 ↗
34. Proximate composition, vitamin and anatomical studies on Gomphrena celosioides10.9734/ARRB/2016/25546 ↗
35. Chemical, morphology and thermal evaluation of cellulose microfibers obtained from Hibiscus sabdariffa10.1016/j.carbpol.2012.09.015 ↗
36. Fabrication of multicolor fluorescent polyvinyl alcohol through surface modification with conjugated polymers by oxidative polymerization10.1016/j.apsusc.2018.02.200 ↗
37. Preparation and Characterization of Jute Cellulose Crystals-Reinforced Poly(L-lactic acid) Biocomposite for Biomedical Applications10.1155/2014/842147 ↗