Analysis of key influencing factors of the bond performance between BFRP bars and coral reef and sand concrete
Source abstract
Abstract
Abstract Based on 19 groups of 135 cube pullout specimens, a systematic study was conducted on the key influencing factors of the bond performance between the BFRP bars and Coral Reef and Sand Concrete(CRSC). The research parameters include the bar diameters, bond length, relative thickness of concrete cover, concrete strength and stirrup restraint. The results show that the failure modes the pull-out specimens can be divided into three types: pull-out failure, split failure, and split-pullout failure. While pull-out failures were more likely to occur in specimens with a smaller bar diameter and shorter bond length, splitting failures were more likely to occur in specimens with a larger bar diameter and longer bond length. The application of stirrups allows the specimens to retain part of the bond load after concrete splitting. Based on the existing classic bond-slip models, a bond-slip constitutive model is established, which can better describe the bond-slip relationship between BFRP bars and CRSC.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Study on bond performance between FRP bars and seawater coral aggregate concrete10.1016/j.conbuildmat.2018.04.015 ↗
2. Durability of Glass Fiber-Reinforced Polymer Reinforcing Bars in Concrete Environment10.1061/(ASCE)1090-0268(2002)6:3(143) ↗
3. Liu J, Ou Z, Peng W, et al. Literature Review of Coral Concrete. Arab J Sci Eng., 43(4):1-13. https://doi.org/43(4):1-13.10.1007/s13369-017-2705-x..
4. Mix design and characteristics evaluation of an eco-friendly Ultra-High Performance Concrete incorporating recycled coral based materials10.1016/j.jclepro.2017.07.096 ↗
5. Experimental study on the influence of raw materials on the compressive strength of coral sand concrete
6. Yang H, Xiong J, Wang S. Effect analysis of water-cement ratio on compressive strength for coral aggregate concrete. Construstion Technology,1002-8498(2016) 23-0101-04 (in Chinese).
7. Mechanical properties of coral concrete subjected to uniaxial dynamic compression10.1016/j.conbuildmat.2018.12.032 ↗
8. Da B, Yu H, Ma H, et al. “Experimental investigation of whole stress-strain curves of coral concrete”. Constr Build Mater., 122: 81-89. https://doi.org/10.1016/j.conbuildmat.2016.06.064..10.1016/j.conbuildmat.2016.06.064 ↗
9. The corrosion investigation of rebar embedded in the fibers reinforced concrete10.1016/j.conbuildmat.2012.04.051 ↗
10. Reinforcement corrosion research based on the linear polarization resistance method for coral aggregate seawater concrete in a marine environment10.1108/ACMM-03-2018-1911 ↗
11. Cheol Woo Park, Jong Sung Sim. Debonding Failure Mechanism of Basalt Fiber Sheet Bonded on Concrete. Key Engineering Materials.,2007, 76(3):143-153,https://doi.org/10.4028/www.scientific.net/KEM.348-349.925.10.4028/www.scientific.net/KEM.348-349.925 ↗
12. Mechanical Characterization of Basalt FRP Rebars and Long-Term Strength Predictive Model10.1061/(ASCE)CC.1943-5614.0000497 ↗
13. Creep Rupture Performance of Basalt Fiber-Reinforced Polymer Bars10.1061/(ASCE)AS.1943-5525.0000391 ↗
14. Bond Strength of Standard and High-Modulus GFRP Bars in High-Strength Concrete10.1061/(ASCE)MT.1943-5533.0000758 ↗
15. Bond Behavior of Fiber Reinforced Polymer Bars under Direct Pullout Conditions10.1061/(ASCE)1090-0268(2004)8:2(173) ↗
16. Effect of FRP bar degradation on interface bond with high strength concrete10.1016/j.cemconcomp.2008.05.006 ↗
17. Bond between carbon fibre-reinforced polymer (CFRP) bars and ultra high performance fibre reinforced concrete (UHPFRC): Experimental study10.1016/j.conbuildmat.2010.02.006 ↗
18. Gu X, Yu B, Wu M. Experimental study of the bond performance and mechanical response of GFRP reinforced concrete. Construction & Building Materials, https://doi.org/10.1016/j.conbuildmat.2016.03.2112016, 114:407-415.10.1016/j.conbuildmat.2016.03.211 ↗
19. Experimental investigations on the bond behavior between concrete and FRP reinforcing bars10.1016/j.conbuildmat.2018.03.169 ↗
20. Experimental study on bond performance of GFRP bars in self-compacting steel fiber reinforced concrete10.1016/j.compstruct.2012.07.009 ↗
21. Bond Performance of Basalt Fiber-Reinforced Polymer Bars to Concrete10.1061/(ASCE)CC.1943-5614.0000487 ↗
22. Experimental study on bonding properties of BFRP bars and coraconcrete
23. Experimental study on bonding properties of GFRP bars and coral concrete
24. Behavior and Modeling of Bond of FRP Rebars to Concrete10.1061/(ASCE)1090-0268(1997)1:2(40) ↗
25. Tensile and bond properties of GFRP reinforcing bars
26. D.Y. Gao, J.J. Xie, Z.C. Li. Basic problems of bond performance of fiber polymer reinforced concrete. Journal of zhengzhou university, 2002, 23 (1). (in Chinese).
27. ACI (American Concrete Institute). 2004. Guide test methods for fiber-reinforced polymers(FRPs) for reinforcingor strengthening concrete structures. ACI440-04, Detroit, MI, ACI .
28. Confinement effects on the steel–concrete bond strength and pull-out failure10.1016/j.engfracmech.2012.10.013 ↗
29. Bond slip constitutive relationship model between GFRP/steel strand composite bars and concrete
30. Chen · 2017