Silica fume-reinforced alkali-activated uncalcined Pisha Sandstone-based geopolymer cement
Source abstract
Abstract
Abstract A new type of alkali-activated cement, prepared from natural Pisha Sandstone and silica fume, was reported. The strength, water resistance, shrinkage, and hydration properties of alkali-activated uncalcined PS-based geopolymer cement were experimentally investigated. The compressive strength of APC with 10 wt% SF and 3 wt% NaOH could reach 44.8 MPa with a softening coefficient of 0.98 and shrinkage of 0.36%, at the age of 28 days. The hydration products of APC were mainly Si-Al gels (geopolymer). Adding SF to APC significantly enhanced the formation of Si-Al gels and increased the ratio of Si to Al in Si-Al gels, the higher ratio of which was associated with better mechanical properties and water resistance of APC. The strength, water resistance, and shrinkage of APC were similar to those of traditional cement, which could satisfy the requirements of most practical engineering applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. A provincial lateral carbon emissions compensation plan in China based on carbon budget perspective10.1016/j.scitotenv.2019.07.174 ↗
2. K. Du, P.Z. Li, Z.M. Yan, Do green technology innovations contribute to carbon dioxide emission reduction? Empirical evidence from patent data, Technological Forecasting & Social Change, 146(2019):297-303.10.1016/j.techfore.2019.06.010 ↗
3. Jiang · 2019
4. Geopolymers: inorganic polymeric new marerials10.1007/BF01912193 ↗
5. Effects of Initial Porosity and Water Pressure on Seepage-Erosion Properties of Water Inrush in Completely Weathered Granite
6. Development of low cost supplementary cementitious materials utilizing thermally activated Pisha sandstone10.1016/j.conbuildmat.2018.04.111 ↗
7. Chemical research and climate change as drivers in the commercial adoption of alkali activated materials10.1007/s12649-010-9015-9 ↗
8. One-part alkali-activated materials: a review10.1016/j.cemconres.2017.10.001 ↗
9. Hydration products, internal relative humidity and drying shrinkage of alkali activated slag mortar with expansion agents10.1016/j.conbuildmat.2017.09.162 ↗
10. The role of inorganic polymer technology in the development of ‘green concrete’10.1016/j.cemconres.2007.08.018 ↗
11. Evaluation of energy potential of municipal solid waste from African urban areas10.1016/j.rser.2015.05.067 ↗
12. Durability evaluation of geopolymer and conventional concretes10.1016/j.conbuildmat.2017.01.056 ↗
13. Effects of EN-1 Soil Stabilizer on Slope Runoff Hydraulic Characteristics of Pisha Sandstone Stabilized Soil
14. Influence of nucleation seeding on the hydration kinetics and compressive strength of alkali activated slag paste10.1016/j.cemconres.2011.04.002 ↗
15. The experimental analysiss study of soft sandstone soil properties in the plateau hilly region
16. The influence of metakaolin and silica fume on the chemistry of alkali-silica reaction products10.1016/S0958-9465(00)00096-2 ↗
17. J. Davidovits., Geopolymers: inorganic polymeric new materials, J Therm Anal, 37(1991):1633-1688.10.1007/BF01912193 ↗
18. Lightweight hybrid organic-inorganic geopolymers obtained using polyurethane waste10.1016/j.conbuildmat.2018.07.006 ↗
19. Upcycling unexplored dregs and biomass fly ash from the paper and pulp industry in the production of ecofriendly geopolymer mortars: A preliminary assessment10.1016/j.conbuildmat.2018.07.017 ↗
20. Study on the strength development, hydration process and carbonation process of NaOH-activated Pisha Sandstone10.1016/j.conbuildmat.2014.05.075 ↗
21. Influence of curing temperature on cement hydration and mechanical strength development of fly ash mortars10.1016/S0008-8846(97)00098-7 ↗
22. Alkali-activated fly ash-based geopolymers with zeolite or bentonite as additives10.1016/j.cemconcomp.2009.07.006 ↗
23. Reactivity of blast furnace slag in Portland cement blends hydrated under different conditions10.1016/S0008-8846(01)00587-7 ↗
24. Effect of adding mineral additives to alkali-activated natural pozzolan paste10.1016/j.conbuildmat.2010.12.031 ↗
25. Durability of geopolymer materials in sodium and magnesium sulfate solutions10.1016/j.cemconres.2004.09.002 ↗
26. Investigating the mechanical property and reaction mechanism of geopolymers cement with red Pisha Sandstone10.1016/j.conbuildmat.2018.12.202 ↗
27. Controlling shrinkage in concrete mixes
28. Influence of silica fume content on shrinkage of early-age cement-based materials
29. Corrugated tube protocol for autogenous shrinkage measurements: review and statistical assessment10.1617/s11527-016-0933-2 ↗
30. Comparison of non-contact autogenous shrinkage measurements and the stress ratio of capillary stress to compressive strength10.1016/j.conbuildmat.2019.02.003 ↗
31. Chemical shrinkage and autogenous shrinkage of hydrating cement paste10.1016/0008-8846(95)00011-9 ↗
32. Weathering of pisha-sandstones in the wind-water erosion crisscross region on the Loess Plateau10.1007/s11629-008-0218-5 ↗
33. Effect of ettringite seed crystals on the properties of calcium sulphoaluminate cement10.1016/j.conbuildmat.2019.02.130 ↗
34. Thermal behavior of geopolymers prepared using classs F fly ash and elevated temperature curing10.1016/j.cemconres.2006.03.022 ↗
35. Synergistic recycling of calcined clayey sediments and water potabilization sludge as geopolymer precursors:upscaling from binders to precast paving cement-free bricks10.1016/j.conbuildmat.2016.12.039 ↗
36. Effect of different superplasticizers and activator combinations on workability and strength of fly ash based geopolymer10.1016/j.matdes.2014.01.064 ↗