journal article·2016-10

Lightweight natural lime composites for rehabilitation of Historical Heritage

Elisa Sala, Cristina Zanotti, Chiara Passoni, Alessandra Marini

Publisher page

Abstract

Abstract Failure and deterioration of structural interventions on masonry buildings demonstrated the need for compatible repairs. Mechanical, chemical, transport properties and density of Portland Cement concrete are poorly compatible with lime mortar masonry structures. Several natural lime composites are developed in this study for compatible Historical Heritage rehabilitation. Two relevant interventions with different strength/density requirements are considered: masonry vault filling and wooden floor non-structural overlay. Density minimization is attained with various lightweight aggregate (LWA) types/contents; different LWAs in one same mortar are also employed. Composites’ density, strength, stiffness, cost, and carbon footprint are compared; the influence of different factors is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Building materials and conservation · Concrete and Cement Materials Research · Masonry and Concrete Structural Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Compatible repairs to stonebuilt structures
2. Degradation and restoration of masonry walls of historical buildings10.1007/BF02472568 ↗
3. Lime mortar with natural pozzolana: historical issues and mechanical behavior
4. A short history of the use of lime as a building material beyond Europe and North America10.1080/15583058.2010.511694 ↗
5. European Committee for Standardization (CEN), EN 459-1:2015: Building lime – Part 1: Definitions, specifications and conformity criteria.
6. Smeaton · 1791
7. Lancaster · 2005
8. Compatibility of materials used for repair of masonry buildings: Research and applications
9. Kinetic study of the kaolinite-mullite reaction sequence. Part I: kaolinite dehydroxylation10.1007/BF00202253 ↗
10. Mindess · 2003
11. Mechanical properties of masonry repair dolomitic lime-based mortars10.1016/j.cemconres.2005.10.004 ↗
12. A State-of-the-art on concrete repairs and some thoughts on ways to achieve durability in repairs
13. Strength-porosity relationships in lime-pozzolan mortars10.1016/j.conbuildmat.2005.02.012 ↗
14. Pecchioni · 2008
15. Henry · 2012
16. A. Marini, C. Zanotti, S. Cominelli, A. Gasparotti, E. Giuriani, Strengthening of wooden floors by means of natural lime mortar slabs, in: Proceedings of the International Conference on Protection of Historical Buildings (PROHITECH 09), Rome, 21–24 June 2009, pp. 409–414.
17. European Committee for Concrete (CEB) · 1977
18. Lime-cement mortars for coating with improved thermal and acoustic performance10.1016/j.conbuildmat.2014.11.012 ↗
19. Role of lightweight fillers on the properties of a mixed-binder mortar10.1016/j.cemconcomp.2009.07.003 ↗
20. European Committee for Standardization (CEN), EN 13055-1:2002: Lightweight aggregates – Part 1: Lightweight aggregates for concrete, mortar and grout.
21. American concrete Institute, ACI 213R-14: Guide for Structural Lightweight-Aggregate Concrete, Reported by ACI Committee 213, 2014.
22. European Committee for Standardization (CEN), EN 1097-6:2013: Tests for mechanical and physical properties of aggregates – Part 6: Determination of particle density and water absorption.
23. Italian Committee for Standardization (UNI), UNI 6556: Tests of concretes — determination of static modulus of elasticity in compression, 1976.
24. European Committee for Standardization (CEN), EN 12390-3:2009: Testing Hardened Concrete – Part 3: Compressive Strength of Test Specimens.
25. New natural hydraulic lime mortars – physical and microstructural properties in different curing condition10.1016/j.conbuildmat.2013.12.078 ↗
26. Natural hydraulic lime based grouts – the selection of grout injection parameters for masonry consolidation10.1016/j.conbuildmat.2011.05.012 ↗
27. European Committee for Standardization (CEN), EN 1015-11:1999/A1:2006: Methods of test for mortar for masonry – Part 11: Determination of flexural and compressive strength of hardened mortar.
28. Aerial lime-based mortars blended with a pozzolanic additive and different admixtures: a mineralogical, textural and physical-mechanical study10.1016/j.conbuildmat.2011.12.069 ↗
29. Analysis of the strain-rate behavior of a basalt fiber reinforced natural hydraulic mortar10.1016/j.cemconcomp.2014.06.009 ↗
30. Pozzolanic properties of glass fines in lime mortars10.1179/174367607X228061 ↗
31. Physical and chemical assessment of lime-metakaolin mortars: influence of binder: aggregate ratio10.1016/j.cemconcomp.2013.06.010 ↗
32. Mechanical and mineralogical properties of natural hydraulic lime-metakaolin mortars in different curing conditions10.1016/j.conbuildmat.2013.10.045 ↗
33. The effect of aggregate size and type of binder on microstructure and mechanical properties of NHL mortars10.1016/j.conbuildmat.2013.11.111 ↗
34. Masonry repair lime-based mortars: factors affecting the mechanical behavior10.1016/S0008-8846(03)00210-2 ↗
35. Mechanical properties of natural hydraulic lime-based mortars10.1016/j.cemconres.2004.02.005 ↗
36. Optimization of compatible restoration mortars for the earthquake protection of Hagia Sophia10.1016/j.culher.2013.01.008 ↗
37. Comprehensive study on mechanical properties of lime-based pastes with additions of metakaolin and brick dust10.1016/j.cemconres.2014.06.006 ↗
38. Hydrophobic lime based mortars with linseed oil: characterization and durability assessment10.1016/j.cemconres.2014.03.011 ↗
39. Admixtures effect on fresh state properties of aerial lime based mortars10.1016/j.conbuildmat.2008.06.008 ↗
40. Interfacial Transition Zone (ITZ) analysis in hydraulic lime restoration mortars for grouting of historical masonries10.1080/15583058.2011.561907 ↗
41. The role of aggregates on the structure and properties of lime mortars10.1016/j.cemconcomp.2005.05.001 ↗
42. Study on the lightweight hydraulic mortars designed by the use of diatomite as partial replacement of natural hydraulic lime and masonry waste as aggregate10.1016/j.conbuildmat.2014.09.062 ↗
43. Cork-based mortars for thermal bridges correction in a dwelling: thermal performance and cost evaluation10.1016/j.enbuild.2013.12.022 ↗
44. Hammond · 2006