Application of leached iron ore tailings to produce sustainable cements
Source abstract
Abstract
The use of iron ore tailings (IOT) is a trend for the future of mining. The adoption of alternatives that minimise the disposal of natural resources and add value to production processes strongly supports this effort. Hydrometallurgy, by means of acid leaching, has been investigated as a processing route for iron recovery from IOT. After the separation of the liquor, a solid fraction of insoluble quartz and kaolinite remains (the main mineralogical phases). In the same way, the cement industry is an intensive consumer of raw materials and a major emitter of greenhouse gases. As one of the main alternatives for reducing these impacts, clinker substitution by wastes from other industries is being extensively considered. Thus, this work aims to evaluate the properties of the solid product of IOT leaching (L-IOT) and its potential to produce sustainable cements. L-IOT main composition is based on silicon (≈35%), aluminium (≈8%) and iron (2%). After thermal activation, the L-IOT was incorporated into pastes, replacing the cement by up to 20 wt%. The rheological parameters, hydration kinetics, compressive strength, mineralogy through X-ray diffraction (XRD) and thermogravimetric analysis (TGA) of cement pastes were assessed. L-IOT increased cement pastes` dynamic yield stress and viscosity and anticipated its main heat flow peak by up to three hours. Replacement contents of up to 20 wt% showed an equivalent 28-d compressive strength in the control sample, associated with carboaluminates formation. Finally, a simplified carbon dioxide equivalent emission (CO 2-eq) analysis was conducted to evaluate the L-IOT’s environmental feasibility. Reductions of up to 21% CO 2-eq emissions were observed for an L-IOT content of 20 wt%, compared to plain cement. The hydrometallurgical route allowed the recovery of 95% of the iron content in IOT, and its by-product presented technical and environmental feasibility for cement replacement in cementitious matrices.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Tailings Management and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. A perspective on the development of sustainable construction products: An eco-design approach10.2495/SDP-V12-N2-304-314 ↗
2. E.T. Asr, R. Kakaie, M. Ataei, M.R. Tavakoli Mohammadi, A review of studies on sustainable development in mining life cycle, J. Clean. Prod. 229 (2019) 213–231. https://doi.org/10.1016/j.jclepro.2019.05.029.10.1016/j.jclepro.2019.05.029 ↗
3. Effect of water/binder ratio and temperature on the hydration heat and properties of ternary blended cement containing slag and iron tailing powder10.1007/s10973-020-09687-8 ↗
4. Wastes from the petroleum industries as sustainable resource materials in construction sectors: Opportunities, limitations, and directions10.1016/j.jclepro.2020.125459 ↗
5. Utilization of iron ore tailing as an alternative mineral filler in asphalt mastic: High-temperature performance and environmental aspects10.1016/j.jclepro.2021.130318 ↗
6. B.C. Mendes, L.G. Pedroti, M.P.F. Fontes, J.C.L. Ribeiro, C.M.F. Vieira, A.A. Pacheco, A.R.G. d. Azevedo, Technical and environmental assessment of the incorporation of iron ore tailings in construction clay bricks, Constr. Build. Mater. 227 (2019) 116669. https://doi.org/10.1016/j.conbuildmat.2019.08.050.10.1016/j.conbuildmat.2019.08.050 ↗
7. Iron ore tailings: characterization and applications
8. Utilization of iron ore tailings as fine aggregate in ultra-high performance concrete10.1016/j.conbuildmat.2013.10.019 ↗
9. Sustainable perspective of ancillary construction materials in infrastructure industry: An overview10.1016/j.jclepro.2022.132864 ↗
10. Environmental impact of cement production and Solutions: A review10.1016/j.matpr.2021.02.212 ↗
11. The drivers for adoption of eco-innovation10.1016/j.jclepro.2015.11.033 ↗
12. Industrial solid waste management through sustainable green technology: Case study insights from steel and mining industry in Keonjhar, India10.1016/j.matpr.2020.02.949 ↗
13. Utilization of solid wastes in construction materials
14. Toledo Filho, Feasibility of iron-rich ore tailing as supplementary cementitious material in cement pastes10.1016/j.conbuildmat.2021.124496 ↗
15. Hydrometallurgical processing of Brazilian iron ore tailings for the synthesis of pigments10.4236/gm.2022.122003 ↗
16. Evaluation of iron ore tailings as replacement for fine aggregate in concrete10.1016/j.conbuildmat.2016.05.095 ↗
17. A study on durability and strength properties of high strength concrete with partial replacement of iron ore tailings with fine aggregates10.1016/j.matpr.2022.05.163 ↗
18. Exploitation of iron ore tailing for the development of ceramic tiles10.1016/S0956-053X(00)00034-9 ↗
19. Assessment of the use potential of iron ore tailings in the manufacture of ceramic tiles: From tailings-dams to “brown porcelain”10.1016/j.conbuildmat.2019.02.052 ↗
20. Ceramics composites from iron ore tailings and blast furnace slag10.1016/j.ceramint.2021.12.260 ↗
21. Reuse of iron ore tailings from tailings dams as pigment for sustainable paints10.1016/j.jclepro.2018.07.313 ↗
22. Synthesis of high-performance copper barium silicate composite pigment from waste iron ore tailings10.1016/j.ceramint.2021.06.230 ↗
23. T.S.W. Sá, S. Oda, V. Karla Castelo Branco Louback Machado Balthar, R. Dias Toledo Filho, Use of iron ore tailings and sediments on pavement structure, Constr. Build. Mater. 342 (2022) 128072. https://doi.org/10.1016/j.conbuildmat.2022.128072.10.1016/j.conbuildmat.2022.128072 ↗
24. Activation of hydration properties of iron ore tailings and their application as supplementary cementitious materials in cement10.1016/j.powtec.2019.11.002 ↗
25. Mechanochemical activation of iron ore tailing-based ternary supplementary cementitious materials
26. Potential CO2 reduction and uptake due to industrialization and efficient cement use in Brazil by 205010.1111/jiec.13130 ↗
27. Calcined clay limestone cements (LC3)10.1016/j.cemconres.2017.08.017 ↗
28. Feasibility study of developing green ECC using iron ore tailings powder as cement replacement10.1061/(ASCE)MT.1943-5533.0000674 ↗
29. Iron ore tailings as a supplementary cementitious material in the production of pigmented cements10.1016/j.jclepro.2020.123260 ↗
30. Review on chemical treatment of industrial waste water
31. Evaluating dissolved air flotation for oil/water separation using a hybridized coagulant of ferric chloride and chitosan10.1016/j.jwpe.2022.102836 ↗
32. Application of ferric chloride both as oxidant and complexant to enhance the dissolution of metallic copper10.1016/j.hydromet.2010.07.013 ↗
33. Kinetic limitations of gold leaching in ferric chloride media Part I: Batch reactor studies
34. Experimental investigation on CI engine performance using steam injection and ferric chloride as catalyst
35. An efficient approach for emission reduction in diesel engine with ferric chloride as catalyst and yttria stabilized zirconia as thermal barrier coating10.1016/j.matpr.2022.03.317 ↗
36. Green synthesis of iron oxide nanoparticles by aqueous leaves extract of Mentha Pulegium L.: Effect of ferric chloride concentration on the type of product10.1016/j.matlet.2020.127364 ↗
37. Production of a ferric chloride coagulant by leaching an iron ore tailing10.1016/j.mineng.2020.106511 ↗
38. Use of calcined water treatment plant sludge for sustainable cementitious composites production10.1016/j.jclepro.2021.129484 ↗
39. Functionalization of multi-walled carbon nanotubes with 3-aminopropyltriethoxysilane for application in cementitious matrix10.1016/j.conbuildmat.2021.125358 ↗
40. Avoiding inaccurate interpretations of rheological measurements for cement-based materials10.1016/j.cemconres.2015.05.003 ↗
41. Method for calculating dynamic yield stress of fresh cement pastes using a coaxial cylinder system10.1111/jace.17979 ↗
42. Operational issues in isothermal calorimetry10.1016/j.cemconres.2010.03.017 ↗
43. American Society of Testing and Materials (ASTM), ASTM C39/C39M - Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, (2021).
44. K. Scrivener, R. Snellings, B. Lothenbach, A Practical Guide to Microstructural Analysis of Cementitious Materials, 2018. https://doi.org/10.1201/b19074.10.1201/b19074 ↗
45. Effect of ornamental stone waste incorporation on the rheology, hydration, microstructure, and CO2 emissions of ordinary portland cement10.3390/ma15020401 ↗
46. Votorantim Cimentos, EPD – Environmental Product Declaration: CP II E 40, CP III-40 RS and CP V-ARI, 2016.
47. Eco-efficient low binder high-performance self-compacting concretes10.1016/j.conbuildmat.2019.07.254 ↗
48. S. Schlomer, T. Bruckner, L. Fulton, E. Hertwich, A. Mckinnon, D. Perczyk, J. Roy, R. Schaffer, R. Sims, P. Smith, R. Wiser, Technology-specific Cost and Performance Parameters, 2014.
49. Measuring the eco-efficiency of cement use10.1016/j.cemconcomp.2010.07.009 ↗
50. Use of calcined water treatment plant sludge for sustainable cementitious composites production10.1016/j.jclepro.2021.129484 ↗
51. Supplementary cementitious materials10.1016/j.cemconres.2010.12.001 ↗
52. Utilization of tailings in cement and concrete: A review10.1515/secm-2019-0029 ↗
53. Understanding the filler effect on the nucleation and growth of C-S-H10.1111/jace.13177 ↗
54. M.S. Duarte, B.S. Almada, W. José dos Santos, S.A. Lima Bessa, A. Cesar da Silva Bezerra, M.T. Paulino Aguilar, Influence of mechanical treatment and magnetic separation on the performance of iron ore tailings as supplementary cementitious material, J. Build. Eng. 59 (2022) 105099. https://doi.org/10.1016/j.jobe.2022.105099.10.1016/j.jobe.2022.105099 ↗
55. Test research on hydration process of cement-iron tailings powder composite cementitious materials10.1016/j.powtec.2022.117215 ↗
56. Influence of limestone on the hydration of Portland cements10.1016/j.cemconres.2008.01.002 ↗
57. Innovative methodology for comprehensive utilization of iron ore tailings. Part 1: The recovery of iron from iron ore tailings using magnetic separation after magnetizing roasting10.1016/j.jhazmat.2009.09.019 ↗
58. Innovative methodology for comprehensive utilization of iron ore tailings. Part 2: The residues after iron recovery from iron ore tailings to prepare cementitious material10.1016/j.jhazmat.2009.09.018 ↗
59. ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS, ABNT NBR 16697: Cimento Portland — Requisitos, 2018.
60. Feasibility of iron-rich ore tailing as supplementary cementitious material in cement pastes10.1016/j.conbuildmat.2021.124496 ↗
61. The use of iron ore tailings obtained from the Germano dam in the production of a sustainable concrete10.1016/j.jclepro.2020.123929 ↗
62. Calcined clay – Limestone cements: Hydration processes with high and low-grade kaolinite clays10.1016/j.conbuildmat.2021.122271 ↗
63. Influence of limestone on the hydration of ternary slag cements10.1016/j.cemconres.2017.05.013 ↗
64. Stability of hemicarbonate under cement paste-like conditions10.1016/j.cemconres.2021.106692 ↗
65. Influence of limestone and anhydrite on the hydration of Portland cements10.1016/j.cemconcomp.2013.11.007 ↗
66. A life-cycle approach to environmental, mechanical, and durability properties of “green” concrete mixes with rice husk ash10.1016/j.jclepro.2015.06.029 ↗
67. Effect of supplementary cementitious materials on reduction of CO2 emissions from concrete10.1016/j.jclepro.2014.03.018 ↗
68. Sindicato Nacional da Indústria do Cimento (SNIC), Relatório anual, (2021).