Understanding the effect of moisture on interfacial behaviors of geopolymer-aggregate interaction at molecular level
Source abstract
Abstract
The interaction between geopolymer and aggregate largely determines the mechanical properties and durability of the geopolymer concrete. The effects of moisture on interfacial behavior of geopolymer-aggregate interaction are poorly understood, especially at molecular level. Herein, molecular dynamics (MD) simulation was employed to reveal the interactive behaviors of geopolymer-aggregate interfacial system with the participation of moisture. Full atomistic models adopted for MD simulations were constructed using the sodium aluminum silicate hydrate ( N-A S H) gel model and the main chemical components of the aggregates, SiO 2 and CaCO 3. Then the wetting characteristics of aggregate surfaces, interfacial characteristics and mechanical behaviors of the geopolymer-aggregate interfacial systems containing interfacial moisture were elucidated and compared. It is found that the SiO 2 surface is hydrophobic while the CaCO 3 surface exhibits hydrophilic characteristics. Interfacial moisture participates in electrostatic interaction, H-bond interaction and coordination interaction in geopolymer-aggregate interface area. Appropriate interfacial water is beneficial to the interfacial interaction of geopolymer-aggregate system, but excessive water will increase the risk of interfacial failure. The interfacial moisture affects the diffusion behavior of water molecules and Na + ions in geopolymer to the interfacial region, and the formation of H-bonds and coordination bonds at the interface. Mechanically, with the participation of interfacial moisture, the geopolymer-SiO 2 interfacial system possesses stronger tensile strength, and a greater risk of shear failure than that of geopolymer-CaCO 3. The above atomic-level findings may facilitate a better design and fabrication of geopolymer concrete in engineering.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · CO2 Sequestration and Geologic Interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Potential using of water-soluble polymer latex modified greener road geopolymeric grouts: Its preparation, characterization and mechanism10.1016/j.conbuildmat.2020.121757 ↗
2. Composition and Performance Enhancement of Geopolymer Grouting Materials with Industrial Residue: a Review
3. Statistical modeling and multi-objective optimization of road geopolymer grouting material via RSM and MOPSO10.1016/j.conbuildmat.2020.121534 ↗
4. Preparation and characterization of the greener alkali-activated grouting materials based on multi-index optimization10.1016/j.conbuildmat.2020.121328 ↗
5. Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement10.1016/j.jclepro.2011.02.010 ↗
6. Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete10.1016/j.conbuildmat.2013.01.023 ↗
7. The rheological, fresh and strength effects of cold-bonded geopolymer made with metakaolin and slag for grouting10.1016/j.conbuildmat.2020.122091 ↗
8. Rheological and strength performances of cold-bonded geopolymer made from limestone dust and bottom ash for grouting and deep mixing10.1007/s10064-020-01998-2 ↗
9. On the prediction of unconfined compressive strength of silty soil stabilized with bottom ash, jute and steel fibers via artificial intelligence10.12989/gae.2017.12.3.441 ↗
10. Comparison on the properties of ITZs in fly ash-based geopolymer and Portland cement concretes with equivalent flowability10.1016/j.cemconres.2021.106392 ↗
11. Investigation of steel fiber reinforced high-performance concrete with full aeolian sand: Mix design, characteristics and microstructure10.1016/j.conbuildmat.2022.128065 ↗
12. Aggregate-cement paste interface. II: Influence of aggregate physical properties10.1016/S0008-8846(98)00126-4 ↗
13. Supercritical carbonation of calcareous composites: Influence of mix design10.1016/j.cemconcomp.2013.06.004 ↗
14. Effect of aggregate size on transition zone properties at the portland cement paste interface10.1016/0008-8846(91)90059-Q ↗
15. Kinetics of geopolymerization: Role of Al2O3 and SiO210.1016/j.cemconres.2007.01.003 ↗
16. Microstructure of geopolymer accounting for associated mechanical characteristics under various stress states10.1016/j.cemconres.2013.09.007 ↗
17. In situ quantitatively tracking the hydration process of interfacial transition zone between coarse aggregate and k-psds geopolymer matrix with esem
18. New insights into creep characteristics of calcium silicate hydrates at molecular level10.1016/j.cemconres.2021.106366 ↗
19. Modified Lucas-Washburn function of capillary transport in the calcium silicate hydrate gel pore: A coarse-grained molecular dynamics study10.1016/j.cemconres.2020.106166 ↗
20. The interpenetration polymer network in a cement paste-waterborne epoxy system10.1016/j.cemconres.2020.106236 ↗
21. Atomistic modelling of moisture sensitivity: a damage mechanisms study of asphalt concrete interfaces10.1080/14680629.2017.1329875 ↗
22. Molecular dynamics analysis of moisture effect on asphalt-aggregate adhesion considering anisotropic mineral surfaces10.1016/j.apsusc.2020.146830 ↗
23. Molecular interaction of Asphalt-Aggregate interface modified by silane coupling agents at dry and wet conditions10.1016/j.apsusc.2021.151365 ↗
24. Probing the dynamics of water over multiple pore scales in cement by atomistic simulations10.1016/j.apsusc.2021.150426 ↗
25. Nanoscale insights on the interface between passive film of steel and cement hydrate: Diffusion, kinetics and mechanics10.1016/j.apsusc.2020.145898 ↗
26. Understanding geopolymer binder-aggregate interfacial characteristics at molecular level10.1016/j.cemconres.2021.106582 ↗
27. Structural and mechanical properties of geopolymers made of aluminosilicate powder with different SiO2/Al2O3 ratio: Molecular dynamics simulation and microstructural experimental study10.1016/j.conbuildmat.2019.117935 ↗
28. Recent advances in molecular dynamics simulation of the N-A-S-H geopolymer system: modeling, structural analysis, and dynamics10.1016/j.conbuildmat.2020.122196 ↗
29. Static and Dynamic Interfacial Interactions of Geopolymer-Aggregate Considering Anisotropic Mineral Surfaces:'A Molecular Dynamics Study
30. Reactive force field simulation on polymerization and hydrolytic reactions in calcium aluminate silicate hydrate (C-A-S-H) gel: structure, dynamics and mechanical properties10.1039/C4RA10645H ↗
31. Molecular dynamics simulation of N-A-S-H geopolymer macro molecule model for prediction of its modulus of elasticity10.1016/j.conbuildmat.2020.118176 ↗
32. The effect of water molecules on the structure, dynamics, and mechanical properties of sodium aluminosilicate hydrate (NASH) gel: A molecular dynamics study10.1016/j.conbuildmat.2018.10.221 ↗
33. Atomistic Simulations of Geopolymer Models: The Impact of Disorder on Structure and Mechanics10.1021/acsami.8b03873 ↗
34. A molecular dynamics study of calcium silicate hydrates-aggregate interfacial interactions and influence of moisture10.1007/s11771-021-4582-4 ↗
35. Molecular dynamics simulation of distribution and adhesion of asphalt components on steel slag10.1016/j.conbuildmat.2020.119332 ↗
36. COMPASS II: extended coverage for polymer and drug-like molecule databases10.1007/s00894-016-2909-0 ↗
37. Molecular dynamics study on the mechanical properties of Portland cement clinker phases10.1016/j.commatsci.2016.03.043 ↗
38. Molecular level study of uni/multi-axial deformation response of tobermorite 11 angstrom: A force field comparison study10.1016/j.cemconres.2021.106451 ↗
39. A molecular dynamics investigation of hydrostatic compression characteristics of mineral Jennite10.1016/j.cemconres.2017.05.004 ↗
40. Contact angle of soil minerals: A molecular dynamics study10.1016/j.compgeo.2016.01.012 ↗
41. Exploration of molecular dynamics for the adsorption of anionic emulsifier on the main chemical composition surface of aggregate10.1016/j.conbuildmat.2021.123210 ↗
42. Moisture effect on nanostructure and adhesion energy of asphalt on aggregate surface: A molecular dynamics study10.1016/j.apsusc.2020.145435 ↗
43. Interfacial characteristics and mechanical behaviors of geopolymer binder with steel slag aggregate: Insights from molecular dynamics10.1016/j.jclepro.2022.132385 ↗
44. Study of cohesion and adhesion properties of asphalt concrete with molecular dynamics simulation10.1016/j.commatsci.2015.10.024 ↗
45. POROUS MICROSTRUCTURE OF THE INTERFACIAL TRANSITION ZONE IN GEOPOLYMER COMPOSITES
46. Experimental study on moisture transport property of interfacial transition zone in concrete
47. Molecular structure, dynamics and adsorption behavior of water molecules and ions on [0 1 0] surface of γ-FeOOH: A molecular dynamics approach10.1016/j.conbuildmat.2019.07.116 ↗
48. Interfacial Connection Mechanisms in Calcium-Silicate-Hydrates/Polymer Nanocomposites: A Molecular Dynamics Study10.1021/acsami.7b12795 ↗
49. Molecular dynamics simulation of coupled water and ion adsorption in the nano-pores of a realistic calcium-silicate-hydrate gel10.1016/j.conbuildmat.2021.123961 ↗
50. Hydration properties of alkali and alkaline earth metal ions in aqueous solution: A molecular dynamics study10.1016/j.cplett.2019.04.045 ↗
51. Nanoscale insight on the initial hydration mechanism of magnesium phosphate cement10.1016/j.conbuildmat.2020.122213 ↗
52. Aggregate-cement paste interface: Part I. Influence of aggregate geochemistry10.1016/S0008-8846(99)00086-1 ↗
53. In-situ measurement of nominal compressive elastic modulus of interfacial transition zone in concrete by SEM-DIC coupled method10.1016/j.cemconcomp.2020.103779 ↗
54. Interfacial interaction of aggregate-cement paste in concrete, Journal of Wuhan University of Technology-Mater
55. Aggregate Shape Analysis and Evaluation of Modified Epoxy Wear Layer for Cement Pavement, Journal of Shenyang Jianzhu University
56. Influence of aggregate surface roughness on mechanical properties of interface and concrete10.1016/j.conbuildmat.2014.04.131 ↗